Drivers for Pandaboard Expansion Board (LCD, 3G, GPIO, etc)

This forum is for topics dealing with problems with software specifically in the ARMv7h repo.

Drivers for Pandaboard Expansion Board (LCD, 3G, GPIO, etc)

Postby Lamia » Mon Feb 21, 2022 3:35 am

Hi Folks,
I suppose this category is the most appropriate for this subject. Please point me at the archlinuxarm pkgs acting as drivers for the hardware listed here - https://termbin.com/fc09.

By the way, thanks for the brilliant job to consistently maintain Arch OS and its ARM7hf packages for Pandaboard.
Lamia
 
Posts: 2
Joined: Mon Feb 21, 2022 2:32 am

Re: Drivers for Pandaboard Expansion Board (LCD, 3G, GPIO, e

Postby Lamia » Tue Feb 22, 2022 2:57 am

This is an image of the expansion board - https://svtronics.com/index.php?route=p ... duct_id=28 - with Pandaboard on top of it. All I see on bootup is a white screen. And as you would see in the log earlier posted, the VGA/LCD and BLUETOOTH drivers among others would not load. Kindly assist.
Lamia
 
Posts: 2
Joined: Mon Feb 21, 2022 2:32 am


Return to ARMv7h

Who is online

Users browsing this forum: No registered users and 8 guests