After upgrade: invalid ELF header

[vinibali]

Hello there!
Do you might experience the same?
I was updating my Arch on a compressed F2FS rootfs and it seems something broke at the next bootup.
I'm almost pretty sure something is broken with the compression, because when I rolled back to the previous kernel it's working again.
Original version: 5.19.8-1-ARCH
Target version: 6.2.1
$this->bbcode_second_pass_code('', '[ 2.913501] Waiting 1 sec before mounting root device...
[ 3.684739] scsi 2:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 3.693394] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.699124] sd 2:0:0:0: [sdc] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
[ 3.708247] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.713751] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.729663] sdc: sdc1 sdc2
[ 3.732790] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 3.990165] F2FS-fs (sdc2): Found nat_bits in checkpoint
[ 4.137899] F2FS-fs (sdc2): recover fsync data on readonly fs
[ 4.144962] F2FS-fs (sdc2): Mounted with checkpoint version = 17f3d16b
[ 4.151727] VFS: Mounted root (f2fs filesystem) readonly on device 8:34.
[ 4.162204] devtmpfs: mounted
[ 4.166609] Freeing unused kernel image (initmem) memory: 2048K
[ 4.172841] Run /sbin/init as init process
/sbin/init: erro[ 4.371217] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
[ 4.380289] CPU: 0 PID: 1 Comm: init Not tainted 6.2.10-1-ARCH #1
[ 4.386419] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 4.392375] unwind_backtrace from show_stack+0x10/0x14
[ 4.397644] show_stack from dump_stack_lvl+0x40/0x4c
[ 4.402731] dump_stack_lvl from panic+0x114/0x358
[ 4.407553] panic from do_exit+0x94c/0x950
[ 4.411767] do_exit from do_group_exit+0x34/0x84
[ 4.416505] do_group_exit from __wake_up_parent+0x0/0x18
[ 4.421949] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]---
r while loading shared libraries: /usr/lib/libcrypto.so.3: invalid ELF header')