Hello,
I managed to get the PWM Output of the Odrdoid C1+ running.
However, in the Arch Linux Odroid C1 wiki are some tiny errors.
e.g. the Duty Cycle is not in % ... it is the counter from 0...1024
My Problem:
If I put the counter to 1024, there is still a very tiny glicht - each period. This glitch is exactly 40ns wide (= 25 MHz)
NOTE: My PWM Frequency is 400Hz. And one Counter Digit is there 2.4us
If I reduce the dutyl cycle to value to 1023, the Low Pulse is 2.4 us -> this is ok.
My expectation: With duty Cycle = 1024, there should be permanently high, without a periodic glicht.
Does anyobody know how to fix this?