Hello,
I have followed the ARMv7 Installation guide to install Arch on a Raspberry Pi 4, and can´t get the
analog output to run. Although the kernel modules are installed,
$this->bbcode_second_pass_code('', 'lsmod | grep snd_bcm2835
snd_bcm2835 24576 0
snd_pcm 106496 5 snd_compress,vc4,snd_pcm_dmaengine,snd_bcm2835,snd_soc_core
snd 77824 5 snd_compress,snd_timer,snd_bcm2835,snd_soc_core,snd_pcm')
the analog output is not showing up in
$this->bbcode_second_pass_code('', 'cat /proc/asound/cards:
0 [vc4hdmi0 ]: vc4-hdmi - vc4-hdmi-0
vc4-hdmi-0
1 [vc4hdmi1 ]: vc4-hdmi - vc4-hdmi-1
vc4-hdmi-1')
In the /boot/config.txt, I have tried all combinations of the options
dtparam=audio=on
and
hdmi_ignore_edid_audio=1
with no effect on "cat /proc/asound/cards".
So,
what can I do to make the analog output available there, so that I can create an /etc/asound.conf file with an entry of the analog card?
-------------
System:
-------------
After Arch installation, I updated Arch and installed pulseaudio-server. Then I installed alsa-utils and then pulseaudio-alsa.
By now, the following alsa packages are installed:
alsa-lib 1.2.4-3
alsa-plugins 1:1.2.2-2
alsa-tools 1.2.2-1
alsa-topology-conf 1.2.4-2
alsa-ucm-conf 1.2.4-2
alsa-utils 1.2.4-2
pulseaudio-alsa 1:1.2.2-2
python-pyalsa 1.1.6-6
zita-alsa-pcmi 0.3.2-3
...and the following pulseaudio packages:
libcanberra-pulse 0.30+2+gc0620e4-3
libpulse 14.2-3
pulseaudio 14.2-3
pulseaudio-alsa 1:1.2.2-2
xfce4-pulseaudio-plugin 0.4.3-1
__________________________
My kernel is: 5.10.35-2-ARCH armv7l GNU/Linux
Can anyone please help?