Hello,
currently I'm trying to run a Technisat SkyStar USB device on my RPi2.
Installed the device firmware like described here: http://www.linuxtv.org/wiki/index.php/T ... tar_USB_HD
journalctl:
Jan 01 01:00:13 servicepi kernel: dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state.
Jan 01 01:00:13 servicepi kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan 01 01:00:13 servicepi kernel: DVB: registering new adapter (Technisat SkyStar USB HD (DVB-S/S2))
Jan 01 01:00:13 servicepi kernel: stv6110x_attach: Attaching STV6110x
Jan 01 01:00:13 servicepi kernel: technisat-usb2: i2c-error: 60 = 7
Jan 01 01:00:13 servicepi kernel: technisat-usb2: i2c-error: 68 = 65
Jan 01 01:00:13 servicepi kernel: technisat-usb2: i2c-error: 68 = 65
Jan 01 01:00:13 servicepi kernel: technisat-usb2: i2c-error: 68 = 65
Jan 01 01:00:13 servicepi kernel:
"technisat-usb2: i2c-error: 68 = 65" error message then repeats endlessly when trying to access the frontend through vdr/tvheadend.
The device is working without problems on other Archlinux (x86_64, armv6h) devices.
Any help/hints would be much appreciated.
Edit: Its working on Raspbian wheezy, so I guess the problem is related to ArchlinuxARM (armv7h).