kernel 6.9.8-2: rock64 bootfail due to the emmc init error

[Kabbone]

Is there a new version in the armbian repos?
We had this before, that new kernel versions need an updated u-boot and it looks like you updated the kernel and dtb. The dtb file describes the hardware.

If they have a new working image you could probably install uboot from there with chroot

[Boia11]

[code]
U-Boot TPL 2022.07-armbian (Mar 14 2024 - 00:34:55)
LPDDR3, 800MHz
BW=32 Col=11 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=4096MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2022.07-armbian (Mar 14 2024 - 00:34:55 +0000)
Trying to boot from MMC2
NOTICE: BL31: lts-v2.8.8(release):armbian
NOTICE: BL31: Built : 00:34:31, Mar 14 2024
NOTICE: BL31:Rockchip release version: v1.2
INFO: ARM GICv2 driver initialized
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9


U-Boot 2022.07-armbian (Mar 14 2024 - 00:34:55 +0000)

Model: Pine64 Rock64
DRAM: 4 GiB
PMIC: RK8050 (on=0x40, off=0x00)
Core: 229 devices, 25 uclasses, devicetree: separate
MMC: mmc@ff500000: 1, mmc@ff520000: 0
Loading Environment from MMC... Card did not respond to voltage select! : -110
*** Warning - No block device, using default environment

In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Pine64 Rock64
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0

=> printenv
arch=arm
baudrate=1500000
board=evb_rk3328
board_name=evb_rk3328
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=mmc1 mmc0 usb0 pxe dhcp
bootcmd=run distro_bootcmd
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=0
cpu=armv8
cpuid#=55524b50303630303000000000051104
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
efi_dtb_prefixes=/ /dtb/ /dtb/current/
eth1addr=5e:6f:fe:92:16:6d
ethaddr=5e:6f:fe:92:16:4d
ethernet_phy=rtl8211f
fdt_addr_r=0x01f00000
fdtcontroladdr=fcf27280
fdtfile=rockchip/rk3328-rock64.dtb
kernel_addr_r=0x02080000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x800800
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
partitions=uuid_disk=${uuid_gpt_disk};name=loader1,start=32K,size=4000K,uuid=${uuid_gpt_loader1};name=loader2,start=8MB,size=4MB,uuid=${uuid_gpt_loader2};name=trust,size=4M,uuid=${uuid_gpt_atf};name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};name=rootfs,size=-,uuid=B921B045-1DF0-41C3-AF44-4C6F280D3FAE;
pxefile_addr_r=0x00600000
ramdisk_addr_r=0x06000000
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x00500000
serial#=4ac2ca093dce7166
soc=rk3328
stderr=serial@ff130000
stdin=serial@ff130000
stdout=serial@ff130000
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
vendor=rockchip

Environment size: 4140/32764 bytes

=> bdinfo
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000000200000
-> size = 0x00000000fee00000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 1500000 bps
relocaddr = 0x00000000fef3d000
reloc off = 0x00000000fed3d000
Build = 64-bit
current eth = ethernet@ff540000
ethaddr = 5e:6f:fe:92:16:4d
IP addr = <NULL>
fdt_blob = 0x00000000fcf27280
new_fdt = 0x00000000fcf27280
fdt_size = 0x000000000000db40
lmb_dump_all:
memory.cnt = 0x1
memory[0] [0x200000-0xfeffffff], 0xfee00000 bytes flags: 0
reserved.cnt = 0x1
reserved[0] [0xfcf22e20-0xfeffffff], 0x020dd1e0 bytes flags: 0
devicetree = separate
arch_number = 0x0000000000000000
TLB addr = 0x00000000feff0000
irq_sp = 0x00000000fcf27270
sp start = 0x00000000fcf27270
Early malloc usage: 15c0 / 2000

=> mmcinfo
Device: mmc@ff520000
Manufacturer ID: 88
OEM: 3
Name: NCard
Bus Speed: 52000000
Mode: MMC High Speed (52MHz)
Rd Block Len: 512
MMC version 5.0
High Capacity: Yes
Capacity: 57.6 GiB
Bus Width: 8-bit
Erase Group Size: 512 KiB
HC WP Group Size: 4 MiB
User Capacity: 57.6 GiB
Boot Capacity: 4 MiB ENH
RPMB Capacity: 4 MiB ENH
Boot area 0 is not write protected
Boot area 1 is not write protected
[/code]

[bits]

This also occurs on Debian Bookworm Linux 6.1.20-23 (the current Stable release). It worked one version back on 6.1.20-22.

https://forum.pine64.org/showthread.php?tid=19356 gets into it.

[bennofs]

I think [url]https://lore.kernel.org/linux-rockchip/705544af-d615-4ff0-a54c-72a69140ce6d@eh5.me//url] is the upstream linux kernel bug that exactly matches the issue here.

The fix appears to be here: [url]https://patchwork.kernel.org/project/linux-arm-kernel/patch/20240709105428.1176375-1-i@eh5.me/[/url] but not merged yet. So hopefully this issue will be fixed with a upcoming linux kernel update.

[graysky]

I added this patch to linux-aarch64-6.9.12-1. Please try it when it hits the repos and report back.