I just installed clamav 0.101.4-1 on my odroid according to the arch wiki
$this->bbcode_second_pass_quote('', '$') uname -a
Linux odroid-001e06336dd6 5.3.8-2-ARCH #1 SMP Sun Nov 3 14:59:20 UTC 2019 aarch64 GNU/Linux
slow with clamav on odroid-c2
2 posts
• Page 1 of 1
slow with clamav on odroid-c2
by risto3 » Wed Nov 06, 2019 12:00 pm
when I get to the test eicar part... it took almost 10 minutes!
I must say I am running with nfs /home, but good grief
Running with '--debug' I notice that things seem okay up to
$this->bbcode_second_pass_quote('', 'L')ibClamAV debug: daily.msu skipped
then a real long wait before output again.
here is the summary from running debug:
$this->bbcode_second_pass_quote('', '-')---------- SCAN SUMMARY -----------
Known viruses: 6530258
Engine version: 0.101.4
Scanned directories: 1
Scanned files: 9
Infected files: 0
Data scanned: 0.84 MB
Data read: 0.69 MB (ratio 1.21:1)
Time: 566.203 sec (9 m 26 s)
I saved the debug output if anybody wants (that can't recreate).
I find somewhat suspect the following snippets:
$this->bbcode_second_pass_quote('', 'L')ibClamAV debug: Module BYTECODE On
LibClamAV debug: * Submodule INTERPRETER: On
LibClamAV debug: * Submodule JIT X86: On
LibClamAV debug: * Submodule JIT PPC: On
LibClamAV debug: * Submodule JIT ARM: ** Off **
as well as
$this->bbcode_second_pass_quote('', 'L')ibClamAV debug: pool memory used: 807.359 MB
LibClamAV debug: environment detected:
LibClamAV debug: check_platform(0x0a016969, 0x08000000, 0x00080300)
LibClamAV debug: check_platform(0x0a 0 1 69 69,0x0 8 00 00 00,0x00 08 03 00)
LibClamAV debug: check_platform( OS CPU COM FL DCONF,BE PTR CXX VV.VV.VV, FLG CC VV.VV.VV)
LibClamAV debug: Engine version: 0.101.4
LibClamAV debug: Host triple:
LibClamAV debug: Host CPU:
LibClamAV debug: OS: Linux
LibClamAV debug: OS release: 5.3.8-2-ARCH
LibClamAV debug: OS version: #1 SMP Sun Nov 3 14:59:20 UTC 2019
LibClamAV debug: OS hardware: aarch64
LibClamAV debug: OS LLVM category: 0
LibClamAV debug: Has JIT compiled: 0
LibClamAV debug: ------------------------------------------------------
LibClamAV debug: Bytecode: JIT not supported on this architecture, falling back
LibClamAV debug: Bytecode: mode changed to 2
LibClamAV debug: Bytecode: mode is 2
LibClamAV debug: Loading trusted bytecode
LibClamAV debug: bytecode: Parsed 9 APIcalls, maxapi 74
LibClamAV debug: unknown inst type: 96
LibClamAV debug: unknown inst type: 67
LibClamAV debug: unknown inst type: 67
LibClamAV debug: unknown inst type: 67
LibClamAV debug: unknown inst type: 67
LibClamAV debug: unknown inst type: 67
LibClamAV debug: unknown inst type: 67
LibClamAV debug: unknown inst type: 67
LibClamAV debug: unknown inst type: 67
LibClamAV debug: Parsed 53 BBs, 226 instructions
LibClamAV debug: Parsed 1 functions
LibClamAV debug: Bytecode: BC_STARTUP running (builtin)
LibClamAV debug: Bytecode 0: executing in interpreter mode
LibClamAV debug: bytecode: registered ctx variable at 0xffff8a175540 (+256) id 6
LibClamAV debug: bytecode: registered ctx variable at 0xffff8a17543c (+2) id 2
LibClamAV debug: bytecode: registered ctx variable at 0xffff8a175440 (+256) id 1
LibClamAV debug: bytecode: registered ctx variable at 0xffff8a175640 (+4) id 5
LibClamAV debug: bytecode: registered ctx variable at 0xffff8a175648 (+648) id 4
LibClamAV debug: bytecode: registered ctx variable at 0xaaaadd769420 (+744) id 7
LibClamAV debug: bytecode debug: startup: bytecode execution in auto mode
LibClamAV debug: interpreter bytecode run finished in 1667us, after executing 96 opcodes
LibClamAV debug: Bytecode: disable status is 0
LibClamAV debug: Bytecode: 0 bytecode prepared with JIT, 94 prepared with interpreter, 94 total
LibClamAV debug: in cli_magic_scandesc (reclevel: 0/16)
Any hints?
BTW: logfile:
$this->bbcode_second_pass_quote('', '
')Wed Nov 6 12:03:13 2019 -> +++ Started at Wed Nov 6 12:03:13 2019
Wed Nov 6 12:03:13 2019 -> Received 1 file descriptor(s) from systemd.
Wed Nov 6 12:03:13 2019 -> clamd daemon 0.101.4 (OS: linux-gnu, ARCH: aarch64, CPU: aarch64)
Wed Nov 6 12:03:13 2019 -> Running as user clamav (UID 64, GID 64)
Wed Nov 6 12:03:13 2019 -> Log file size limited to 1048576 bytes.
Wed Nov 6 12:03:13 2019 -> Reading databases from /var/lib/clamav
Wed Nov 6 12:03:13 2019 -> Not loading PUA signatures.
Wed Nov 6 12:03:13 2019 -> Bytecode: Security mode set to "TrustSigned".
Wed Nov 6 12:12:38 2019 -> Loaded 6530258 signatures.
Wed Nov 6 12:12:42 2019 -> TCP: No tcp AF_INET/AF_INET6 SOCK_STREAM socket received from systemd.
Wed Nov 6 12:12:42 2019 -> LOCAL: Received AF_UNIX SOCK_STREAM socket from systemd.
Wed Nov 6 12:12:42 2019 -> Limits: Global time limit set to 120000 milliseconds.
Wed Nov 6 12:12:42 2019 -> Limits: Global size limit set to 104857600 bytes.
Wed Nov 6 12:12:42 2019 -> Limits: File size limit set to 26214400 bytes.
Wed Nov 6 12:12:42 2019 -> Limits: Recursion level limit set to 16.
Wed Nov 6 12:12:42 2019 -> Limits: Files limit set to 10000.
Wed Nov 6 12:12:42 2019 -> Limits: MaxEmbeddedPE limit set to 10485760 bytes.
Wed Nov 6 12:12:42 2019 -> Limits: MaxHTMLNormalize limit set to 10485760 bytes.
Wed Nov 6 12:12:42 2019 -> Limits: MaxHTMLNoTags limit set to 2097152 bytes.
Wed Nov 6 12:12:42 2019 -> Limits: MaxScriptNormalize limit set to 5242880 bytes.
Wed Nov 6 12:12:42 2019 -> Limits: MaxZipTypeRcg limit set to 1048576 bytes.
Wed Nov 6 12:12:42 2019 -> Limits: MaxPartitions limit set to 50.
Wed Nov 6 12:12:42 2019 -> Limits: MaxIconsPE limit set to 100.
Wed Nov 6 12:12:42 2019 -> Limits: MaxRecHWP3 limit set to 16.
Wed Nov 6 12:12:42 2019 -> Limits: PCREMatchLimit limit set to 100000.
Wed Nov 6 12:12:42 2019 -> Limits: PCRERecMatchLimit limit set to 2000.
Wed Nov 6 12:12:42 2019 -> Limits: PCREMaxFileSize limit set to 26214400.
Wed Nov 6 12:12:42 2019 -> Archive support enabled.
Wed Nov 6 12:12:42 2019 -> AlertExceedsMax heuristic detection disabled.
Wed Nov 6 12:12:42 2019 -> Heuristic alerts enabled.
Wed Nov 6 12:12:42 2019 -> Portable Executable support enabled.
Wed Nov 6 12:12:42 2019 -> ELF support enabled.
Wed Nov 6 12:12:42 2019 -> Mail files support enabled.
Wed Nov 6 12:12:42 2019 -> OLE2 support enabled.
Wed Nov 6 12:12:42 2019 -> PDF support enabled.
Wed Nov 6 12:12:42 2019 -> SWF support enabled.
Wed Nov 6 12:12:42 2019 -> HTML support enabled.
Wed Nov 6 12:12:42 2019 -> XMLDOCS support enabled.
Wed Nov 6 12:12:42 2019 -> HWP3 support enabled.
Wed Nov 6 12:12:42 2019 -> Self checking every 600 seconds.
Wed Nov 6 12:22:42 2019 -> SelfCheck: Database status OK.