Please help solve the issue—connection speed is 10 Kb instead of the available 1000 Mb. The connection is unstable and drops after 10-15 seconds.
dmesg | grep -i eth0
[ 9.459483] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 9.460580] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.546967] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.550034] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip -s link show eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 00:1e:06:43:c7:68 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
1197308 5118 0 350 0 0
TX: bytes packets errors dropped carrier collsns
142762 1203 0 0 0 0