by ShapeShifter499 » Mon Jul 30, 2018 3:09 am
$this->bbcode_second_pass_quote('kmihelich', 'I')'ve added Heiko's patches for this from last December, which seem to have fallen off the radar. They've been added to the RC kernel.
$this->bbcode_second_pass_quote('summers', 'Y')es you can see its patches 3 and 4 here
https://archlinuxarm.org/packages/aarch64/linux-aarch64-rc/files. Kevin rerolled the package at Thu Jul 19 00:30:48 2018 UTC, so it should be good once it reaches the mirrors. So when you upgrade check you are on release rc5-2.
I just updated and a few hours later I see this in my dmesg log. It looks like the USB 3.0 controller had issues but I'm not 100% sure.
$this->bbcode_second_pass_code('', '[Jul29 18:07] usb 5-1.3: reset SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[Jul29 18:17] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[Jul29 18:32] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ +0.030627] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ +0.000737] sd 0:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 00 c8 80 5e 10 00 00 00 f8 00 00
[ +0.000775] print_req_error: I/O error, dev sdb, sector 3363855888
[Jul29 18:37] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ +0.030621] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ +0.000737] sd 0:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 00 fd 80 1e 18 00 00 00 e8 00 00
[ +0.000775] print_req_error: I/O error, dev sdb, sector 4253031960
[Jul29 18:45] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[Jul29 18:51] usb 5-1.3: reset SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[Jul29 19:50] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[Jul29 19:51] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[ +0.000722] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[ +0.000768] hub 5-1:1.0: hub_ext_port_status failed (err = -22)
[ +0.000033] usb 5-1.4: cmd cmplt err -108
[ +0.000491] usb 5-1-port2: cannot reset (err = -22)
[ +0.000348] usb 5-1.4: cmd cmplt err -108
[ +0.000423] usb 5-1-port2: cannot reset (err = -22)
[ +0.000353] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[ +0.000420] usb 5-1-port2: cannot reset (err = -22)
[ +0.000518] usb 4-1: USB disconnect, device number 2
[ +0.000410] usb 5-1.2: USB disconnect, device number 3
[ +0.001351] usb 5-1: USB disconnect, device number 2
[ +0.001152] sd 0:0:0:0: [sdb] Synchronizing SCSI cache
[ +0.003028] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[ +0.020067] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ +0.000774] sd 0:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 01 72 5f 58 00 00 00 01 00 00 00
[ +0.000775] print_req_error: I/O error, dev sdb, sector 6213818368
[ +0.000652] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ +0.000775] sd 0:0:0:0: [sdb] tag#0 CDB: Write(16) 8a 00 00 00 00 01 71 e1 19 00 00 00 01 00 00 00
[ +0.000786] print_req_error: I/O error, dev sdb, sector 6205544704
[ +0.000568] EXT4-fs warning (device dm-1): ext4_end_bio:323: I/O error 10 writing to inode 21307152 (offset 536477696 size 131072 starting block 775692320)
[ +0.000491] EXT4-fs warning (device dm-1): ext4_end_bio:323: I/O error 10 writing to inode 21307152 (offset 144703488 size 131072 starting block 775593248)
[ +0.000728] Buffer I/O error on device dm-1, logical block 775692320
[ +0.000017] Buffer I/O error on device dm-1, logical block 775692321
[ +0.001208] Buffer I/O error on device dm-1, logical block 775593248
[ +0.000550] Buffer I/O error on device dm-1, logical block 775692322
[ +0.000556] Buffer I/O error on device dm-1, logical block 775593249
[ +0.000547] Buffer I/O error on device dm-1, logical block 775692323
[ +0.000551] Buffer I/O error on device dm-1, logical block 775593250
[ +0.000551] Buffer I/O error on device dm-1, logical block 775692324
[ +0.000594] Buffer I/O error on device dm-1, logical block 775593251
[ +0.000551] Buffer I/O error on device dm-1, logical block 775692325
')