Archlinuxarm won't boot on NanoPi R2S

This is for ARMv8 based devices

Archlinuxarm won't boot on NanoPi R2S

Postby sffred » Fri Feb 26, 2021 11:27 am

It's a credit card sized single board computer. It utilizes the Rockchip RK3328, a quad core 1.5GHz ARMv8 Cortex-A53 SoC. (exactly the same with the description of Rock64 on the archlinuxarm platform page)
On this product https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282, I installed archlinuxarm following this guide https://archlinuxarm.org/platforms/armv8/rockchip/rock64. However, after I plug in the power, it just seems that there's no system at all (so I stopped at step 11).
I have little knowledge about hardware so it's really difficult for me to figure out what is wrong. I have tried the friendlywrt system image provided by the manufacturer and it works fine, so there's no hardware fault. However I still would like to install archlinuxarm on it.
Here is the official wiki of this product http://wiki.friendlyarm.com/wiki/index.php/NanoPi_R2S
sffred
 
Posts: 1
Joined: Fri Feb 26, 2021 11:01 am

Return to ARMv8 Devices

Who is online

Users browsing this forum: No registered users and 8 guests