No AArch64-Boot on rpi4-64gb - invalid bus width

This is for ARMv8 based devices

No AArch64-Boot on rpi4-64gb - invalid bus width

Postby Sylvan » Thu Jan 20, 2022 8:24 am

I have been trying to get AArch64 to run on a new Pi-64GB for a few months now.
After first trying to do my standard configuration (root on a btrfs partition on an external SSD) I was surprised by several errors.
So I tried to run the minimal configuration.
That is - the pure installation as it is described in the wiki.

This resulted in the following error message during boot:
aarch64 sd error.jpg
the error message
aarch64 sd error.jpg (182.78 KiB) Viewed 815 times


Raspberry OS 86Bit & 64Bit work without problems - only Arch64 does not want to work.
I also set root= in boot.txt to mmcblk1p2 (and of course ran mkscr afterwards) but that didn't improve anything either.
Sylvan
 
Posts: 7
Joined: Sun May 12, 2019 8:55 am

Return to ARMv8 Devices

Who is online

Users browsing this forum: No registered users and 2 guests