Armv8 ASUS C101P Wifi and Bluetooth hardware issue

[Sharelter]

I follow this to install archlinuxarm into a microSD Card on ASUS C101P which was built with a RK3399 chip.

The mainline kernel works just fine , but wifi and bluetooth hardware seems have some issue.

I am using this machine to write this topic. It can now connect internet with usb network-share.

The lspci command shows like this:
$this->bbcode_second_pass_code('', '
00:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3399 PCI Express Root Port
01:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 2b42 (rev 11)
')

More detailed information:
$this->bbcode_second_pass_code('', '
00:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3399 PCI Express Root Port (prog-if 00 [Normal decode])
Device tree node: /sys/firmware/devicetree/base/pcie@f8000000/pcie@0,0
Flags: bus master, fast devsel, latency 0, IRQ 73
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fa000000-fa1fffff [size=2M] [32-bit]
Capabilities: <access denied>
Kernel driver in use: pcieport

01:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 2b42 (rev 11)
Device tree node: /sys/firmware/devicetree/base/pcie@f8000000/pcie@0,0/wifi@0,0
Flags: fast devsel, IRQ 87
Memory at fa000000 (64-bit, prefetchable) [size=1M]
Memory at fa100000 (64-bit, prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: mwifiex_pcie
Kernel modules: mwifiex_pcie
')

[Sharelter]

I search the Internet and found this.

I installed the linux-firmware-marvell package and the problem solved