ODroid N2+ Support

[woody]

@yossarian

Here's a good guide: https://jamesachambers.com/odroid-n2-petitboot-ssd-boot-guide/
BTW, I don't remember having to do the step he discusses where you edit the arguments. I've always used UUID in bootargs and that seems to do the trick.

[yossarian]

[quote="woody"]Here's a good guide: [url]https://jamesachambers.com/odroid-n2-petitboot-ssd-boot-guide/[/url]
BTW, I don't remember having to do the step he discusses where you edit the arguments. I've always used UUID in bootargs and that seems to do the trick.[/quote]

Okay I did happen to run across that guide. It seems that that guide spells out how to do it with Ubuntu, and from what I can tell, uboot is still installed on the SSD in that case. I tried to do it without uboot, because the M1 doesn't need uboot and I assume it's not invoked by petitboot, but I might be wrong. I could try some experiments with Ubuntu and see what happens differently.

[karog]

@yossarian, your post on Jun 18, 2023 5:29 pm responding to my post about 2GB vs 4GB is incorrect in that you misunderstand my situation. You stated that both your 2GB and 4GB boards work with the same software so that there is no difference. Here is why that is a wrong conclusion.

Early in boot a ram training occurs. In some older uboots that training is configured to happen once and in newer twice. My N2+ fails the first training but succeeds on the second training. So with the newer uboot I can boot. I got this newer uboot by downloading an odroid minimal ubuntu img and cleaving off the first 2048 512B blocks and then removing the first 512B block. With my older uboot from the arch install download, uboot was configured to try training once and so it failed to boot which led me to seek the newer uboot.

In your console trace you kindly provided I could see that you did this on your 4GB N2+, that the uboot was configured to try twice, and that your board succeeded on the FIRST try. Being configured to try twice, your 2GB version would also boot but that alone does not tell us if it failed on first training and then succeeded on second like mine now does. The only way to tell would be to repeat the console trace while booting the 2GB board and check the training. What I really would like to know is if the first training failure is specific to my board or common to 2GB boards. Given that the training config was changed from one try to two tries, there must have been a reason for that change which suggests the problem is more common than just my board.

Thanks.

[HaroldPointer]

Thanks alot.

[HaroldPointer]

Thanks alot.

[HaroldPointer]

You are correct that the use of partition labels is independent of the device tree blob (DTB) configuration.

[yossarian]

[quote="karog"]@yossarian, your post on Jun 18, 2023 5:29 pm responding to my post about 2GB vs 4GB is incorrect in that you misunderstand my situation. You stated that both your 2GB and 4GB boards work with the same software so that there is no difference. Here is why that is a wrong conclusion.

Early in boot a ram training occurs. In some older uboots that training is configured to happen once and in newer twice. My N2+ fails the first training but succeeds on the second training. So with the newer uboot I can boot. I got this newer uboot by downloading an odroid minimal ubuntu img and cleaving off the first 2048 512B blocks and then removing the first 512B block. With my older uboot from the arch install download, uboot was configured to try training once and so it failed to boot which led me to seek the newer uboot.

In your console trace you kindly provided I could see that you did this on your 4GB N2+, that the uboot was configured to try twice, and that your board succeeded on the FIRST try. Being configured to try twice, your 2GB version would also boot but that alone does not tell us if it failed on first training and then succeeded on second like mine now does. The only way to tell would be to repeat the console trace while booting the 2GB board and check the training. What I really would like to know is if the first training failure is specific to my board or common to 2GB boards. Given that the training config was changed from one try to two tries, there must have been a reason for that change which suggests the problem is more common than just my board.

Thanks.[/quote]

[code]G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02

no sdio debug board detected
L0:00000000
L1:00000703
L2:0000c067
L3:14000020
B2:00402000
B1:e0f83180

TE: 194164

BL2 Built : 06:17:13, Jun 28 2019. g12b gf0505d7-dirty - qi.duan@droid13

Board ID = 5
Set A53 clk to 24M
Set A73 clk to 24M
Set clk81 to 24M
A53 clk: 1200 MHz
A73 clk: 1200 MHz
CLK81: 166.6M
smccc: 00033ea8
DDR driver_vesion: LPDDR4_PHY_V_0_1_14 build time: Jun 28 2019 06:17:09
board id: 5
Load FIP HDR from SD, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
fw parse done
Load ddrfw from SD, src: 0x00030200, des: 0xfffd0000, size: 0x0000c000, part: 0
Load ddrfw from SD, src: 0x0002c200, des: 0xfffd0000, size: 0x00004000, part: 0
PIEI prepare done
fastboot data load
fastboot data verify
verify result: 255
Cfg max: 2, cur: 1. Board id: 255. Force loop cfg
DDR4 probe
ddr clk to 1320MHz
Load ddrfw from SD, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : STREAM 0x00690001 - 0x00000001
INFO : STREAM 0x04020000 -
INFO : ERROR : Training has failed!
1D training failed
Cfg max: 2, cur: 2. Board id: 255. Force loop cfg
DDR4 probe
ddr clk to 1320MHz
Load ddrfw from SD, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of Write leveling coarse delay
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed
Load ddrfw from SD, src: 0x00020200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : Training has run successfully!

R0_RxClkDly_Margin==94 ps 8
R0_TxDqDly_Margi==106 ps 9


R1_RxClkDly_Margin==0 ps 0
R1_TxDqDly_Margi==0 ps 0

dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0001
2D training succeed
auto size-- 65535DDR cs0 size: 2048MB
DDR cs1 size: 0MB
DMC_DDR_CTRL: 0040002cDDR size: 2048MB
cs0 DataBus test pass
cs0 AddrBus test pass
pre test bdlr_100_average==411 bdlr_100_min==411 bdlr_100_max==411 bdlr_100_cur==411
aft test bdlr_100_average==411 bdlr_100_min==411 bdlr_100_max==411 bdlr_100_cur==411
non-sec scramble use zero key
ddr scramble enabled

100bdlr_step_size ps== 407
result report
boot times 0Enable ddr reg access
Load FIP HDR from SD, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
Load BL3X from SD, src: 0x0003c200, des: 0x0172c000, size: 0x00096600, part: 0
0.0;M3 CHK:0;cm4_sp_mode 0
E30HDR
MVN_1=0x00000000
MVN_2=0x00000000
[Image: g12b_v1.1.3375-8f9c8a7 2019-01-24 10:44:46 guotai.shen@droid11-sz]
OPS=0x40
ring efuse init
chipver efuse init
29 0c 40 00 01 07 1a 00 00 12 37 38 37 50 43 50
[0.019859 Inits done]
secure task start!
high task start!
low task start!
run into bl31
NOTICE: BL31: v1.3(release):ab8811b
NOTICE: BL31: Built : 15:03:31, Feb 12 2019
NOTICE: BL31: G12A normal boot!
NOTICE: BL31: BL33 decompress pass
ERROR: Error initializing runtime service opteed_fast


U-Boot 2015.01-g430749a (Mar 29 2021 - 02:02:06)

DRAM: 2 GiB
Relocation Offset is: 76ef0000
spi_post_bind(spifc): req_seq = 0
register usb cfg[0][1] = 0000000077f849a8
MMC: aml_priv->desc_buf = 0x0000000073ee07c0
aml_priv->desc_buf = 0x0000000073ee2b00
SDIO Port C: 0, SDIO Port B: 1
card in
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 400000
co-phase 0x2, tx-dly 0, clock 25000000
[mmc_init] mmc init success
In: serial
Out: serial
Err: serial
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: driver version: v20190313
vpu: detect chip type: 9
vpu: clk_level default: 7(666667000Hz), max: 7(666667000Hz)
vpu: clk_level = 7
vpu: vpu_power_on
vpu: set_vpu_clk
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
vpu: set_vpu_clk finish
vpu: vpu_module_init_config
vpp: vpp_init
vpp: vpp osd2 matrix rgb2yuv..............
cvbs: cpuid:0x29
cvbs_config_hdmipll_g12a
cvbs_set_vid2_clk
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: not registered partition name, logo
movi - Read/write command from/to SD/MMC for ODROID board

Usage:
movi <read|write> <partition|sector> <offset> <address> [<length>]
- <read|write> the command to access the storage
- <offset> the offset from the start of given partiton in lba
- <address> the memory address to load/store from/to the storage device
- [<length>] the size of the block to read/write in bytes
- all parameters must be hexa-decimal only

[OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
[OSD]set initrd_high: 0x3d800000
[OSD]fb_addr for logo: 0x3d800000
[OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
[OSD]fb_addr for logo: 0x3d800000
[OSD]VPP_OFIFO_SIZE:0xfff01fff
[CANVAS]canvas init
[CANVAS]addr=0x3d800000 width=5760, height=2160
cvbs: outputmode[1080p60hz] is invalid
vpp: vpp_matrix_update: 2
set hdmitx VIC = 16
config HPLL = 5940000 frac_rate = 1
HPLL: 0x3b3a04f7
HPLL: 0x1b3a04f7
HPLLv1: 0xdb3a04f7
config HPLL done
j = 6 vid_clk_div = 1
hdmitx phy setting done
hdmitx: set enc for VIC: 16
enc_vpu_bridge_reset[1319]
rx version is 1.4 or below div=10
Net: dwmac.ff3f0000
syntax error
Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
## Attempting fetch boot.ini in mmc:0...
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
** Bad device mmc 0 **
## Executing script at 04000000
Wrong image format for "source" command
## Attempting fetch boot.scr in mmc:0...
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
emmc/sd response timeout, cmd1, status=0x1ff2800
** Bad device mmc 0 **
## Executing script at 04000000
Wrong image format for "source" command
## Attempting fetch boot.ini in mmc:1...
reading boot.ini
2266 bytes read in 5 ms (442.4 KiB/s)
## Executing script at 04000000
reading boot-logo.bmp.gz
** Unable to read file boot-logo.bmp.gz **
reading boot-logo.bmp
** Unable to read file boot-logo.bmp **
movi: not registered partition name, logo
movi - Read/write command from/to SD/MMC for ODROID board

Usage:
movi <read|write> <partition|sector> <offset> <address> [<length>]
- <read|write> the command to access the storage
- <offset> the offset from the start of given partiton in lba
- <address> the memory address to load/store from/to the storage device
- [<length>] the size of the block to read/write in bytes
- all parameters must be hexa-decimal only

[OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
[OSD]fb_addr for logo: 0x3d800000
[OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters
[OSD]fb_addr for logo: 0x3d800000
[OSD]VPP_OFIFO_SIZE:0xfff01000
cvbs: outputmode[1080p60hz] is invalid
vpp: vpp_matrix_update: 2
set hdmitx VIC = 16
config HPLL = 5940000 frac_rate = 1
HPLL: 0x3b3a04f7
HPLL: 0x1b3a04f7
HPLLv1: 0xdb3a04f7
config HPLL done
j = 6 vid_clk_div = 1
hdmitx phy setting done
hdmitx: set enc for VIC: 16
enc_vpu_bridge_reset[1319]
rx version is 1.4 or below div=10
reading /Image
42795520 bytes read in 3692 ms (11.1 MiB/s)
reading /dtbs/amlogic/meson-g12b-odroid-n2-plus.dtb
78314 bytes read in 17 ms (4.4 MiB/s)
reading /initramfs-linux.uimg
7784719 bytes read in 677 ms (11 MiB/s)
[rsvmem] get fdtaddr NULL!
rsvmem - reserve memory

Usage:
rsvmem check - check reserved memory
rsvmem dump - dump reserved memory

rsvmem check failed
## Loading init Ramdisk from Legacy Image at 04080000 ...
Image Name: Ramdisk Image
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 7784655 Bytes = 7.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
active_slot is <NULL>
Unknown command 'store' - try 'help'
No dtbo patitions found
load dtb from 0x1000000 ......
## Flattened Device Tree blob at 20000000
Booting using the fdt blob at 0x20000000
No valid dtbo image found
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
[rsvmem] fdt get prop fail.
Loading Ramdisk to 3d093000, end 3d7ff8cf ... OK
Loading Device Tree to 000000001ffe9000, end 000000001ffff1e9 ... OK

Starting kernel ...

uboot time: 9291241 us
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.2.10-1-aarch64-ARCH (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT_DYNAMIC Fri Apr 7 10:32:52 MDT 2023
[ 0.000000] Machine model: Hardkernel ODROID-N2Plus
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: bypass linux,cma node, using cmdline CMA params instead
[ 0.000000] OF: reserved mem: node linux,cma compatible matching fail
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x0000000077ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
[ 0.000000] cma: Reserved 800 MiB at 0x0000000043c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 21 pages/cpu s46632 r8192 d31192 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced OFF by mitigations=off
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840
[ 0.000000] Kernel command line: root=LABEL=ROOT rootwait rw audit=0 mitigations=off console=ttyAML0,115200n8 console=tty1 logo=osd0,loaded no_console_suspend fsck.repair=yes net.ifnames=0 cma=800M clk_ignore_unused video=HDMI-A-1:190
[ 0.000000] audit: disabled (until reboot)
[ 0.000000] Unknown kernel command line parameters "logo=osd0,loaded", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1022036K/1966080K available (19328K kernel code, 4544K rwdata, 10208K rodata, 7552K init, 977K bss, 124844K reserved, 819200K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Dynamic Preempt: full
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000515] Console: colour dummy device 80x25
[ 0.000527] printk: console [tty1] enabled
[ 0.000989] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.001013] pid_max: default: 32768 minimum: 301
[ 0.001179] LSM: initializing lsm=capability,yama
[ 0.001204] Yama: becoming mindful.
[ 0.001406] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001433] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002685] spectre-v4 mitigation disabled by command-line option
[ 0.004304] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.004346] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.004460] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.004741] rcu: Hierarchical SRCU implementation.
[ 0.004756] rcu: Max phase no-delay instances is 400.
[ 0.010637] EFI services will not be available.
[ 0.011494] smp: Bringing up secondary CPUs ...
[ 0.012397] Detected VIPT I-cache on CPU1
[ 0.012560] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.014117] CPU features: detected: Spectre-v2
[ 0.014131] CPU features: detected: Spectre-v4
[ 0.014136] CPU features: detected: Spectre-BHB
[ 0.014141] CPU features: detected: ARM erratum 858921
[ 0.014148] Detected VIPT I-cache on CPU2
[ 0.014259] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.014276] arch_timer: CPU2: Trapping CNTVCT access
[ 0.014287] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.015192] Detected VIPT I-cache on CPU3
[ 0.015268] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.015277] arch_timer: CPU3: Trapping CNTVCT access
[ 0.015283] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.016157] Detected VIPT I-cache on CPU4
[ 0.016233] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.016242] arch_timer: CPU4: Trapping CNTVCT access
[ 0.016248] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.017127] Detected VIPT I-cache on CPU5
[ 0.017204] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.017213] arch_timer: CPU5: Trapping CNTVCT access
[ 0.017219] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.017317] smp: Brought up 1 node, 6 CPUs
[ 0.017497] SMP: Total of 6 processors activated.
[ 0.017510] CPU features: detected: 32-bit EL0 Support
[ 0.017520] CPU features: detected: 32-bit EL1 Support
[ 0.017534] CPU features: detected: CRC32 instructions
[ 0.017635] CPU: All CPU(s) started at EL2
[ 0.017657] alternatives: applying system-wide alternatives
[ 0.019922] devtmpfs: initialized
[ 0.030593] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.030635] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.042877] pinctrl core: initialized pinctrl subsystem
[ 0.045182] DMI not present or invalid.
[ 0.045836] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.047105] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.047443] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.047674] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.049021] thermal_sys: Registered thermal governor 'fair_share'
[ 0.049027] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.049039] thermal_sys: Registered thermal governor 'step_wise'
[ 0.049049] thermal_sys: Registered thermal governor 'user_space'
[ 0.049058] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.049134] cpuidle: using governor ladder
[ 0.049167] cpuidle: using governor menu
[ 0.049382] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.049531] ASID allocator initialised with 65536 entries
[ 0.051325] Serial: AMBA PL011 UART driver
[ 0.060780] platform ff600000.hdmi-tx: Fixed dependency cycle(s) with /soc/vpu@ff900000
[ 0.087670] platform ff600000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector
[ 0.089694] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.089715] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.089736] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.089747] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.089758] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.089767] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.089776] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.089784] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.090239] cryptd: max_cpu_qlen set to 1000
[ 0.108016] raid6: neonx8 gen() 2906 MB/s
[ 0.125097] raid6: neonx4 gen() 3026 MB/s
[ 0.142190] raid6: neonx2 gen() 2320 MB/s
[ 0.159272] raid6: neonx1 gen() 1713 MB/s
[ 0.176367] raid6: int64x8 gen() 1327 MB/s
[ 0.193454] raid6: int64x4 gen() 1415 MB/s
[ 0.210528] raid6: int64x2 gen() 1335 MB/s
[ 0.227614] raid6: int64x1 gen() 1107 MB/s
[ 0.227624] raid6: using algorithm neonx4 gen() 3026 MB/s
[ 0.244698] raid6: .... xor() 2260 MB/s, rmw enabled
[ 0.244707] raid6: using neon recovery algorithm
[ 0.245499] ACPI: Interpreter disabled.
[ 0.250013] iommu: Default domain type: Translated
[ 0.250027] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.250787] SCSI subsystem initialized
[ 0.251140] usbcore: registered new interface driver usbfs
[ 0.251169] usbcore: registered new interface driver hub
[ 0.251201] usbcore: registered new device driver usb
[ 0.252032] pps_core: LinuxPPS API ver. 1 registered
[ 0.252043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.252063] PTP clock support registered
[ 0.252246] EDAC MC: Ver: 3.0.0
[ 0.253759] FPGA manager framework
[ 0.253841] Advanced Linux Sound Architecture Driver Initialized.
[ 0.254412] NetLabel: Initializing
[ 0.254423] NetLabel: domain hash size = 128
[ 0.254431] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.254491] NetLabel: unlabeled traffic allowed by default
[ 0.254767] vgaarb: loaded
[ 0.255089] clocksource: Switched to clocksource arch_sys_counter
[ 0.255408] VFS: Disk quotas dquot_6.6.0
[ 0.255455] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.255685] pnp: PnP ACPI: disabled
[ 0.263150] NET: Registered PF_INET protocol family
[ 0.263327] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.265017] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.265048] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.265067] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.265194] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.265371] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.265576] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.265635] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.265667] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.265845] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.266335] RPC: Registered named UNIX socket transport module.
[ 0.266350] RPC: Registered udp transport module.
[ 0.266359] RPC: Registered tcp transport module.
[ 0.266367] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.266382] PCI: CLS 0 bytes, default 64
[ 0.266803] Trying to unpack rootfs image as initramfs...
[ 0.267355] kvm [1]: IPA Size Limit: 40 bits
[ 0.280262] kvm [1]: vgic interrupt IRQ9
[ 0.280450] kvm [1]: Hyp mode initialized successfully
[ 0.282028] Initialise system trusted keyrings
[ 0.282273] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.282385] zbud: loaded
[ 0.283500] NFS: Registering the id_resolver key type
[ 0.283535] Key type id_resolver registered
[ 0.283546] Key type id_legacy registered
[ 0.283577] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.283598] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.283636] ntfs3: Max link count 4000
[ 0.283645] ntfs3: Read-only LZX/Xpress compression included
[ 0.283804] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 0.313251] NET: Registered PF_ALG protocol family
[ 0.313288] xor: measuring software checksum speed
[ 0.315692] 8regs : 4140 MB/sec
[ 0.318132] 32regs : 4053 MB/sec
[ 0.321539] arm64_neon : 2967 MB/sec
[ 0.321548] xor: using function: 8regs (4140 MB/sec)
[ 0.321566] Key type asymmetric registered
[ 0.321577] Asymmetric key parser 'x509' registered
[ 0.321660] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.321825] io scheduler mq-deadline registered
[ 0.321842] io scheduler kyber registered
[ 0.321899] io scheduler bfq registered
[ 0.328464] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.338833] gpio-532 (usb-hub-reset): hogged as output/high
[ 0.349430] IPMI message handler: version 39.2
[ 0.376823] soc soc0: Amlogic Meson G12B (S922X) Revision 29:c (40:2) Detected
[ 0.384970] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.388373] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 0.388436] printk: console [ttyAML0] enabled
[ 0.554404] Freeing initrd memory: 7600K
[ 0.561484] msm_serial: driver initialized
[ 1.567157] random: crng init done
[ 1.582355] SPI driver max3421-hcd has no spi_device_id for maxim,max3421
[ 1.583665] usbcore: registered new interface driver uas
[ 1.588804] usbcore: registered new interface driver usb-storage
[ 1.594741] usbcore: registered new interface driver ums-alauda
[ 1.600605] usbcore: registered new interface driver ums-cypress
[ 1.606565] usbcore: registered new interface driver ums-datafab
[ 1.612514] usbcore: registered new interface driver ums_eneub6250
[ 1.618631] usbcore: registered new interface driver ums-freecom
[ 1.624581] usbcore: registered new interface driver ums-isd200
[ 1.630446] usbcore: registered new interface driver ums-jumpshot
[ 1.636485] usbcore: registered new interface driver ums-karma
[ 1.642262] usbcore: registered new interface driver ums-onetouch
[ 1.648299] usbcore: registered new interface driver ums-realtek
[ 1.654252] usbcore: registered new interface driver ums-sddr09
[ 1.660120] usbcore: registered new interface driver ums-sddr55
[ 1.665982] usbcore: registered new interface driver ums-usbat
[ 1.671793] usbcore: registered new interface driver usbserial_generic
[ 1.678229] usbserial: USB Serial support registered for generic
[ 1.685930] mousedev: PS/2 mouse device common for all mice
[ 1.697010] device-mapper: uevent: version 1.0.3
[ 1.697199] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised:make_clickable_callback(MAGIC_URL_EMAIL, ' ',make_clickable_callback(MAGIC_URL_EMAIL, ' ', ''dm-devel@redhat.com', '', '')', '', '')
[ 1.708547] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 999999 KHz, changing to: 1000000 KHz
[ 1.717185] sdhci: Secure Digital Host Controller Interface driver
[ 1.721122] sdhci: Copyright(c) Pierre Ossman
[ 1.725912] Synopsys Designware Multimedia Card Interface Driver
[ 1.732092] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.738433] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.743548] meson-sm: secure-monitor enabled
[ 1.747606] hid: raw HID events driver (C) Jiri Kosina
[ 1.752275] usbcore: registered new interface driver usbhid
[ 1.757760] usbhid: USB HID core driver
[ 1.766703] Initializing XFRM netlink socket
[ 1.766781] NET: Registered PF_INET6 protocol family
[ 1.784287] Segment Routing with IPv6
[ 1.784341] In-situ OAM (IOAM) with IPv6
[ 1.786269] mip6: Mobile IPv6
[ 1.789158] NET: Registered PF_PACKET protocol family
[ 1.794270] Key type dns_resolver registered
[ 1.802171] registered taskstats version 1
[ 1.802496] Loading compiled-in X.509 certificates
[ 1.807663] zswap: loaded using pool lzo/zbud
[ 1.814238] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 1.820801] Key type .fscrypt registered
[ 1.824518] Key type fscrypt-provisioning registered
[ 1.829871] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no
[ 1.836313] Key type encrypted registered
[ 2.070338] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 2.070373] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 2.078203] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 2.082227] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 2.089411] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 2.097444] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.101801] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.109346] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[ 2.118603] xhci-hcd xhci-hcd.0.auto: irq 17, io mem 0xff500000
[ 2.124536] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.129947] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.137479] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.144000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 2.152132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.159288] usb usb1: Product: xHCI Host Controller
[ 2.164119] usb usb1: Manufacturer: Linux 6.2.10-1-aarch64-ARCH xhci-hcd
[ 2.170759] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 2.175814] hub 1-0:1.0: USB hub found
[ 2.179314] hub 1-0:1.0: 2 ports detected
[ 2.183432] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.191330] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 2.199482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.206674] usb usb2: Product: xHCI Host Controller
[ 2.211472] usb usb2: Manufacturer: Linux 6.2.10-1-aarch64-ARCH xhci-hcd
[ 2.218111] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 2.223112] hub 2-0:1.0: USB hub found
[ 2.226661] hub 2-0:1.0: 1 port detected
[ 2.230842] dwc3-meson-g12a ffe09000.usb: switching to Device Mode
[ 2.240289] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 2.242545] clk: Not disabling unused clocks
[ 2.243442] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 2.245575] ALSA device list:
[ 2.253996] No soundcards found.
[ 2.281526] Freeing unused kernel memory: 7552K
[ 2.281611] Run /init as init process
[ 2.314059] mmc0: Problem switching card into high-speed mode!
[ 2.314408] mmc0: new SDHC card at address 0001
[ 2.319289] mmcblk0: mmc0:0001 SD32G 29.8 GiB
[ 2.325142] mmcblk0: p1 p2
[ 2.428108] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.557682] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.04
[ 2.560238] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.567300] usb 1-1: Product: USB2.1 Hub
[ 2.571178] usb 1-1: Manufacturer: GenesysLogic
[ 2.599899] panfrost ffe40000.gpu: clock rate = 24000000
[ 2.599992] panfrost ffe40000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
[ 2.608977] meson-drm ff900000.vpu: Queued 1 outputs on vpu
[ 2.609700] panfrost ffe40000.gpu: mali-g52 id 0x7212 major 0x0 minor 0x0 status 0x0
[ 2.614847] meson-drm ff900000.vpu: CVBS Output connector not available
[ 2.621511] panfrost ffe40000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
[ 2.621515] panfrost ffe40000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 2.624207] hub 1-1:1.0: USB hub found
[ 2.628062] panfrost ffe40000.gpu: shader_present=0x3 l2_present=0x1
[ 2.628362] hub 1-1:1.0: 4 ports detected
[ 2.639845] [drm] Initialized panfrost 1.2.0 20180908 for ffe40000.gpu on minor 0
[ 2.647954] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 2.679364] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 2.687244] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 2.688045] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 2.695984] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 1
[ 3.321965] Console: switching to colour frame buffer device 240x67
[ 3.337177] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 3.351916] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.04
[ 3.354490] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.361571] usb 2-1: Product: USB3.1 Hub
[ 3.365548] usb 2-1: Manufacturer: GenesysLogic
[ 3.392165] hub 2-1:1.0: USB hub found
[ 3.392497] hub 2-1:1.0: 4 ports detected
[ 9.370381] EXT4-fs (mmcblk0p2): mounted filesystem 263f90bd-915c-418c-9440-7839639c1cbe with ordered data mode. Quota mode: none.
[ 10.576628] systemd[1]: System time before build time, advancing clock.
[ 10.806059] systemd[1]: systemd 253.5-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCR)
[ 10.836563] systemd[1]: Detected architecture arm64.
[ 10.869913] systemd[1]: Hostname set to <cerebrus>.
[ 11.031762] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[ 11.789248] systemd[1]: Queued start job for default target Graphical Interface.
[ 11.803765] systemd[1]: Created slice Slice /system/getty.
[ 11.808274] systemd[1]: Created slice Slice /system/modprobe.
[ 11.813741] systemd[1]: Created slice Slice /system/serial-getty.
[ 11.819824] systemd[1]: Created slice User and Session Slice.
[ 11.825368] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.833320] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.841110] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.850325] systemd[1]: Reached target Local Encrypted Volumes.
[ 11.856091] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 11.862808] systemd[1]: Reached target Path Units.
[ 11.867857] systemd[1]: Reached target Remote Encrypted Volumes.
[ 11.873345] systemd[1]: Reached target Remote File Systems.
[ 11.878691] systemd[1]: Reached target Slice Units.
[ 11.883505] systemd[1]: Reached target Swaps.
[ 11.888059] systemd[1]: Reached target Local Verity Protected Volumes.
[ 11.894493] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 11.903533] systemd[1]: Listening on Process Core Dump Socket.
[ 11.931481] systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
[ 11.941278] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.949243] systemd[1]: Listening on Journal Socket.
[ 11.954033] systemd[1]: Listening on Network Service Netlink Socket.
[ 11.961959] systemd[1]: Listening on udev Control Socket.
[ 11.966976] systemd[1]: Listening on udev Kernel Socket.
[ 11.971877] systemd[1]: Listening on User Database Manager Socket.
[ 11.988239] systemd[1]: Mounting Huge Pages File System...
[ 11.994595] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.001758] systemd[1]: Mounting Kernel Debug File System...
[ 12.006845] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[ 12.030243] systemd[1]: Mounting Temporary Directory /tmp...
[ 12.037307] systemd[1]: Starting Create List of Static Device Nodes...
[ 12.045384] systemd[1]: Starting Load Kernel Module configfs...
[ 12.052967] systemd[1]: Starting Load Kernel Module dm_mod...
[ 12.060298] systemd[1]: Starting Load Kernel Module drm...
[ 12.067500] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 12.075126] systemd[1]: Starting Load Kernel Module fuse...
[ 12.082255] systemd[1]: Starting Load Kernel Module loop...
[ 12.115936] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met.
[ 12.118256] fuse: init (API version 7.38)
[ 12.135237] loop: module loaded
[ 12.138416] systemd[1]: Starting Generate network units from Kernel command line...
[ 12.145533] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 12.164887] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.175010] systemd[1]: Starting Apply Kernel Variables...
[ 12.177948] EXT4-fs (mmcblk0p2): re-mounted 263f90bd-915c-418c-9440-7839639c1cbe. Quota mode: none.
[ 12.188631] systemd[1]: Starting Coldplug All udev Devices...
[ 12.198841] systemd[1]: Mounted Huge Pages File System.
[ 12.204231] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.209814] systemd[1]: Mounted Kernel Debug File System.
[ 12.215756] systemd[1]: Mounted Temporary Directory /tmp.
[ 12.221224] systemd[1]: Finished Create List of Static Device Nodes.
[ 12.230781] systemd[1]:make_clickable_callback(MAGIC_URL_EMAIL, ' ',make_clickable_callback(MAGIC_URL_EMAIL, ' ', ''modprobe@configfs.service', '', '')', '', ''): Deactivated successfully.
[ 12.234653] systemd[1]: Finished Load Kernel Module configfs.
[ 12.242753] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 12.247156] systemd[1]: Finished Load Kernel Module dm_mod.
[ 12.255889] systemd[1]:make_clickable_callback(MAGIC_URL_EMAIL, ' ',make_clickable_callback(MAGIC_URL_EMAIL, ' ', ''modprobe@drm.service', '', '')', '', ''): Deactivated successfully.
[ 12.259414] systemd[1]: Finished Load Kernel Module drm.
[ 12.267749] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 12.271817] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 12.280982] systemd[1]:make_clickable_callback(MAGIC_URL_EMAIL, ' ',make_clickable_callback(MAGIC_URL_EMAIL, ' ', ''modprobe@fuse.service', '', '')', '', ''): Deactivated successfully.
[ 12.284566] systemd[1]: Finished Load Kernel Module fuse.
[ 12.292912] systemd[1]:make_clickable_callback(MAGIC_URL_EMAIL, ' ',make_clickable_callback(MAGIC_URL_EMAIL, ' ', ''modprobe@loop.service', '', '')', '', ''): Deactivated successfully.
[ 12.296568] systemd[1]: Finished Load Kernel Module loop.
[ 12.304862] systemd[1]: Finished Generate network units from Kernel command line.
[ 12.312211] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.318795] systemd[1]: Finished Apply Kernel Variables.
[ 12.324156] systemd[1]: Reached target Preparation for Network.
[ 12.341382] systemd[1]: Mounting FUSE Control File System...
[ 12.347838] systemd[1]: Mounting Kernel Configuration File System...
[ 12.353524] systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 12.362940] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 12.372932] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 12.396445] systemd[1]: Starting Load/Save OS Random Seed...
[ 12.401941] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 12.408308] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 12.426421] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 12.435458] systemd[1]: Mounted FUSE Control File System.
[ 12.441358] systemd[1]: Mounted Kernel Configuration File System.
[ 12.449938] systemd[1]: Finished Load/Save OS Random Seed.
[ 12.454889] systemd[1]: First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 12.487681] systemd[1]: Finished Coldplug All udev Devices.
[ 12.524447] systemd[1]: Starting User Database Manager...
[ 12.584667] systemd[1]: Started User Database Manager.
[ 12.644586] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 12.650709] systemd[1]: Reached target Preparation for Local File Systems.
[ 12.656537] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of an unmet condition check (ConditionPathExists=/var/lib/machines.raw).
[ 12.670584] systemd[1]: Reached target Containers.
[ 12.678486] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of an unmet condition check (ConditionKernelVersion=<5.6).
[ 12.700381] systemd[1]: Starting Journal Service...
[ 12.707200] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 12.759270] systemd-journald[337]: Collecting audit messages is disabled.
[ 12.791784] systemd[1]: Started Journal Service.
[ 12.830568] systemd-journald[337]: Received client request to flush runtime journal.
[ 12.847957] systemd-journald[337]: File /var/log/journal/400fab0e44fb4b30bda005d6eeaa7d80/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 13.568236] gpio-fan gpio-fan: GPIO fan initialized
[ 13.644319] mc: Linux media interface: v0.10
[ 13.703629] meson-vrtc ff8000a8.rtc: registered as rtc1
[ 13.708448] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
[ 13.713429] rtc-pcf8563 0-0051: registered as rtc0
[ 13.719010] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
[ 13.725210] rtc-pcf8563 0-0051: hctosys: unable to read the hardware clock
[ 13.763651] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
[ 13.772400] Registered IR keymap rc-cec
[ 13.774776] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 13.778424] rc rc1: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc1
[ 13.804661] input: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc1/input1
[ 13.808719] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 13.840545] videodev: Linux video capture interface: v2.00
[ 13.852554] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[ 13.855685] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[ 13.861911] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[ 13.862614] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 13.862634] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
[ 13.862639] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[ 13.862642] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[ 13.862645] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[ 13.862649] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[ 13.862652] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[ 13.862744] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[ 13.862749] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[ 13.862753] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 13.869192] Registered IR keymap rc-odroid
[ 13.983313] IR NEC protocol handler initialized
[ 14.007147] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[ 14.011221] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 14.020369] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 14.020408] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input0
[ 14.025344] cfg80211: failed to load regulatory.db
[ 14.027278] meson-ir ff808000.ir: receiver initialized
[ 14.256136] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.422219] meson8b-dwmac ff3f0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 14.430780] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 14.583258] meson8b-dwmac ff3f0000.ethernet eth0: PHY [mdio_mux-0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
[ 14.601104] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[ 14.605062] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[ 14.612055] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[ 17.566022] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 17.572218] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Arch Linux 6.2.10-1-aarch64-ARCH (ttyAML0)

cerebrus login: [/code]

[karog]

Thanks yossarian for posting this. As you can see in the section I have copied below, your 2GB fails the first training just like mine but is configured to try twice and succeeds the second time. It is only two data points (yours and mine) but that gives me much more confidence that this is systematic.

Note the lines marked with *****************

And curses on the forum bolloxing the formatting still with problematic PHP.

[code]
Cfg max: 2, cur: 1. Board id: 255. Force loop cfg ************************ try twice, this is try 1
DDR4 probe
ddr clk to 1320MHz
Load ddrfw from SD, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : STREAM 0x00690001 - 0x00000001
INFO : STREAM 0x04020000 -
INFO : ERROR : Training has failed!
1D training failed ************************ first time failure
Cfg max: 2, cur: 2. Board id: 255. Force loop cfg ************************ try twice, this is try 2
DDR4 probe
ddr clk to 1320MHz
Load ddrfw from SD, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of Write leveling coarse delay
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed ************************* second time success
[/code]