backport 3.2.1-1 => 3.1.10-1 = wifi bad and any modules bad

[lulo]

Iomega Iconnect = Can downgrade linux from to linux 3.1.10-1 = identity ( viewtopic.php?f=7&t=2341 )...any external modules not loaded...only embeded from kernel

$this->bbcode_second_pass_code('', '[lulo@lulo-iconnect ~]$sudo yaourt -Syu
Hasło:
/usr/bin/pacman -Sy
:: Synchronizowanie baz danych z pakietami...
core 37,8 KiB 96,8K/s 00:00 [#############################################] 100%
extra 423,3 KiB 511K/s 00:01 [#############################################] 100%
community 369,1 KiB 695K/s 00:01 [#############################################] 100%
aur jest już w najnowszej wersji


==> Package upgrade only (new release):
extra/screen 4.0.3-12 12 -> 13

==> Software upgrade (new version) :
core/e2fsprogs 1.41.14-2 -> 1.42-1
core/syslog-ng 3.3.3-1 -> 3.3.4-1
extra/alsa-firmware 1.0.24.1-1 -> 1.0.25-1
extra/alsa-lib 1.0.24.1-1 -> 1.0.25-1
extra/ffmpeg 20120111-1 -> 20120127-1

==> Continue upgrade ? [Y/n]
==> [V]iew package detail [M]anually select packages
==> --------------------------------------------------
==> Y
/usr/bin/pacman -S -u
:: Rozpoczynanie pełnej aktualizacji systemu...
ostrzeżenie: libtorrent: local (0.12.9-1.with.pre.allocate) jest nowsze niż community (0.12.9-1)
ostrzeżenie: linux: local (3.2.1-1) jest nowsze niż core (3.1.10-1)
ostrzeżenie: linux-headers: local (3.2.1-1) jest nowsze niż core (3.1.10-1)
ostrzeżenie: rtorrent: local (0.8.9-2.with.color.support) jest nowsze niż community (0.8.9-2)
rozwiązywanie zależności...
szukanie konfliktów międzypakietowych...

Cele (6): alsa-firmware-1.0.25-1 alsa-lib-1.0.25-1 e2fsprogs-1.42-1 ffmpeg-20120127-1 screen-4.0.3-13 syslog-ng-3.3.4-1

Całkowity rozmiar do pobrania: 7,53 MiB
Całkowity rozmiar po instalacji: 31,00 MiB
Rozmiar netto aktualizacji: 0,65 MiB

Kontynuować instalację? [T/n]
:: Pobieranie pakietów z core...
e2fsprogs-1.42-1-arm 640,0 KiB 407K/s 00:02 [#############################################] 100%
syslog-ng-3.3.4-1-arm 292,8 KiB 675K/s 00:00 [#############################################] 100%
:: Pobieranie pakietów z extra...
alsa-firmware-1.0.25-1-arm 2,4 MiB 657K/s 00:04 [#############################################] 100%
alsa-lib-1.0.25-1-arm 317,4 KiB 727K/s 00:00 [#############################################] 100%
ffmpeg-20120127-1-arm 3,5 MiB 666K/s 00:05 [#############################################] 100%
screen-4.0.3-13-arm 417,9 KiB 719K/s 00:01 [#############################################] 100%
(6/6) sprawdzanie spójności pakietów [#############################################] 100%
(6/6) wczytywanie plików pakietu [#############################################] 100%
(6/6) sprawdzanie konfliktów plików [#############################################] 100%
(6/6) sprawdzanie dostępnego miejsca na dysku [#############################################] 100%
(1/6) aktualizowanie alsa-firmware [#############################################] 100%
(2/6) aktualizowanie alsa-lib [#############################################] 100%
(3/6) aktualizowanie e2fsprogs [#############################################] 100%
(4/6) aktualizowanie ffmpeg [#############################################] 100%
(5/6) aktualizowanie screen [#############################################] 100%
(6/6) aktualizowanie syslog-ng [#############################################] 100%
[lulo@lulo-iconnect ~]$ sudo yaourt -Sy linux linux-headers
/usr/bin/pacman -Sy
:: Synchronizowanie baz danych z pakietami...
core jest już w najnowszej wersji
extra jest już w najnowszej wersji
community jest już w najnowszej wersji
aur jest już w najnowszej wersji
/usr/bin/pacman -S core/linux-headers core/linux
ostrzeżenie: dezaktualizowanie pakietu linux-headers (3.2.1-1 => 3.1.10-1)
ostrzeżenie: dezaktualizowanie pakietu linux (3.2.1-1 => 3.1.10-1)
rozwiązywanie zależności...
szukanie konfliktów międzypakietowych...

Cele (2): linux-3.1.10-1 linux-headers-3.1.10-1

Całkowity rozmiar do pobrania: 16,99 MiB
Całkowity rozmiar po instalacji: 56,39 MiB
Rozmiar netto aktualizacji: -1,92 MiB

Kontynuować instalację? [T/n]
:: Pobieranie pakietów z core...
linux-headers-3.1.10-1-arm 4,4 MiB 551K/s 00:08 [#############################################] 100%
linux-3.1.10-1-arm 12,6 MiB 557K/s 00:23 [#############################################] 100%
(2/2) sprawdzanie spójności pakietów [#############################################] 100%
(2/2) wczytywanie plików pakietu [#############################################] 100%
(2/2) sprawdzanie konfliktów plików [#############################################] 100%
(2/2) sprawdzanie dostępnego miejsca na dysku [#############################################] 100%
(1/2) aktualizowanie linux-headers [#############################################] 100%
(2/2) aktualizowanie linux [#############################################] 100%
>>> Updating module dependencies. Please wait ...

REBOOT

[lulo@lulo-iconnect ~]$ dmesg
[ 0.000000] Linux version 3.1.10-1-ARCH (root@platinum) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 PREEMPT Sun Jan 29 19:25:35 UTC 2012
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Iomega iConnect Wireless
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c059a03c, node_mem_map c0668000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 253300k/253300k available, 8844k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xd0800000 - 0xfe800000 ( 736 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0539818 (5319 kB)
[ 0.000000] .init : 0xc053a000 - 0xc0565000 ( 172 kB)
[ 0.000000] .data : 0xc0566000 - 0xc059cbf0 ( 219 kB)
[ 0.000000] .bss : 0xc059cc14 - 0xc066706c ( 810 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[ 0.000000] Console: colour dummy device 80x30
[ 17.702708] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[ 17.742623] pid_max: default: 32768 minimum: 301
[ 17.742759] Security Framework initialized
[ 17.742785] AppArmor: AppArmor disabled by boot time parameter
[ 17.742859] Mount-cache hash table entries: 512
[ 17.743338] CPU: Testing write buffer coherency: ok
[ 17.744539] devtmpfs: initialized
[ 17.746376] NET: Registered protocol family 16
[ 17.747097] Kirkwood: MV88F6281-A0, TCLK=200000000.
[ 17.747115] Feroceon L2: Enabling L2
[ 17.747157] Feroceon L2: Cache support initialised.
[ 17.747765] initial MPP regs: 21111111 00003311 33331100 33333333 00000333 00000000 00000000
[ 17.747799] final MPP regs: 21111111 00003311 33331100 33333333 00000333 00000000 00000000
[ 17.748486] Kirkwood PCIe port 0:
[ 17.748496] link up
[ 17.748505] PCI: bus0 uses PCIe port 0
[ 17.748656] pci 0000:00:00.0: [11ab:6281] type 0 class 0x000580
[ 17.748688] pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
[ 17.748707] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0fffffff]
[ 17.748756] pci 0000:00:00.0: supports D1 D2
[ 17.748803] pci 0000:00:01.0: [1814:3090] type 0 class 0x000280
[ 17.748831] pci 0000:00:01.0: reg 10: [mem 0x40000000-0x4000ffff]
[ 17.748969] PCI: bus0: Fast back to back transfers disabled
[ 17.749246] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff]
[ 17.749270] pci 0000:00:01.0: BAR 0: set to [mem 0xe0000000-0xe000ffff] (PCI address [0xe0000000-0xe000ffff])
[ 17.754572] bio: create slab <bio-0> at 0
[ 17.754978] vgaarb: loaded
[ 17.755281] SCSI subsystem initialized
[ 17.755462] libata version 3.00 loaded.
[ 17.755707] usbcore: registered new interface driver usbfs
[ 17.755814] usbcore: registered new interface driver hub
[ 17.755930] usbcore: registered new device driver usb
[ 17.756579] Switching to clocksource orion_clocksource
[ 17.762631] Switched to NOHz mode on CPU #0
[ 17.768886] FS-Cache: Loaded
[ 17.780532] NET: Registered protocol family 2
[ 17.780804] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 17.781599] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 17.781822] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 17.781937] TCP: Hash tables configured (established 8192 bind 8192)
[ 17.781948] TCP reno registered
[ 17.781961] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 17.781988] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 17.782256] NET: Registered protocol family 1
[ 17.782319] PCI: CLS 32 bytes, default 32
[ 17.782987] audit: initializing netlink socket (disabled)
[ 17.783027] type=2000 audit(0.070:1): initialized
[ 17.882258] VFS: Disk quotas dquot_6.5.2
[ 17.882578] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.885629] JFFS2 version 2.2. (NAND) \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
[ 17.887221] aufs 3.1-20111107
[ 17.887248] msgmni has been set to 494
[ 17.888675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 17.888693] io scheduler noop registered
[ 17.888703] io scheduler deadline registered
[ 17.888801] io scheduler cfq registered (default)
[ 17.888901] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 17.888938] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 17.926670] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 17.966679] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 18.006665] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 18.046666] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 18.052645] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 18.073398] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 18.073507] console [ttyS0] enabled
[ 18.080712] brd: module loaded
[ 18.084235] loop: module loaded
[ 18.085359] ONFI flash detected
[ 18.085537] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
[ 18.085563] Scanning device for bad blocks
[ 18.328905] Creating 4 MTD partitions on "orion_nand":
[ 18.328925] 0x000000000000-0x000000100000 : "u-boot"
[ 18.330016] 0x000000100000-0x000000400000 : "uImage"
[ 18.331027] 0x000000400000-0x000002400000 : "rootfs"
[ 18.332054] 0x000002400000-0x000020000000 : "data"
[ 18.334276] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 18.334382] mv643xx_eth smi: probed
[ 18.336695] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address xx:xx:xx:xx:xx:xx
[ 18.336833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 18.336889] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 18.336984] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 18.366646] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 18.386624] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 18.387295] hub 1-0:1.0: USB hub found
[ 18.387321] hub 1-0:1.0: 1 port detected
[ 18.387894] Initializing USB Mass Storage driver...
[ 18.388001] usbcore: registered new interface driver usb-storage
[ 18.388013] USB Mass Storage support registered.
[ 18.388114] usbcore: registered new interface driver libusual
[ 18.388484] mousedev: PS/2 mouse device common for all mice
[ 18.388787] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 18.388954] sdhci: Secure Digital Host Controller Interface driver
[ 18.388965] sdhci: Copyright(c) Pierre Ossman
[ 18.389046] sdhci-pltfm: SDHCI platform and OF driver helper
[ 18.389207] Registered led device: iconnect:led_level
[ 18.389317] Registered led device: iconnect:blue:power
[ 18.389427] Registered led device: iconnect:red:power
[ 18.389545] Registered led device: iconnect:blue:usb1
[ 18.389657] Registered led device: iconnect:blue:usb2
[ 18.389767] Registered led device: iconnect:blue:usb3
[ 18.389879] Registered led device: iconnect:blue:usb4
[ 18.390003] Registered led device: iconnect:blue:otb
[ 18.390257] usbcore: registered new interface driver r8712u
[ 18.391239] GRE over IPv4 demultiplexor driver
[ 18.391402] TCP cubic registered
[ 18.391415] NET: Registered protocol family 17
[ 18.391514] lib80211: common routines for IEEE802.11 drivers
[ 18.391527] lib80211_crypt: registered algorithm 'NULL'
[ 18.391537] Registering the dns_resolver key type
[ 18.391576] Gating clock of unused units
[ 18.391587] before: 0x00dfc3dd
[ 18.391596] after: 0x00c701cd
[ 18.392201] registered taskstats version 1
[ 18.393035] console [netcon0] enabled
[ 18.393045] netconsole: network logging started
[ 18.393564] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 18.393870] rtc-mv rtc-mv: setting system clock to 2012-01-30 05:15:04 UTC (1327900504)
[ 18.394173] Waiting 10sec before mounting root device...
[ 18.706641] usb 1-1: new high speed USB device number 2 using orion-ehci
[ 18.857715] hub 1-1:1.0: USB hub found
[ 18.857926] hub 1-1:1.0: 4 ports detected
[ 19.136799] usb 1-1.1: new high speed USB device number 3 using orion-ehci
[ 19.248961] scsi0 : usb-storage 1-1.1:1.0
[ 20.247413] scsi 0:0:0:0: Direct-Access ST925031 5AS PQ: 0 ANSI: 2 CCS
[ 20.248446] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.248722] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 20.249211] sd 0:0:0:0: [sda] Write Protect is off
[ 20.249229] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
[ 20.249706] sd 0:0:0:0: [sda] Asking for cache data failed
[ 20.255220] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 20.264070] sd 0:0:0:0: [sda] Asking for cache data failed
[ 20.269623] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 20.276534] sda: sda1
[ 20.278820] sd 0:0:0:0: [sda] Asking for cache data failed
[ 20.284336] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 20.290486] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.480011] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 28.480499] kjournald starting. Commit interval 5 seconds
[ 28.481103] EXT3-fs (sda1): using internal journal
[ 28.481124] EXT3-fs (sda1): mounted filesystem with writeback data mode
[ 28.481170] VFS: Mounted root (ext3 filesystem) on device 8:1.
[ 28.497368] devtmpfs: mounted
[ 28.498005] Freeing init memory: 172K
[ 31.652025] udevd[84]: starting version 179
[ 32.427952] rt2800pci: Unknown symbol rt2x00mac_sw_scan_complete (err 0)
[ 32.427972] rt2800pci: Unknown symbol rt2800_config_shared_key (err 0)
[ 32.427986] rt2800pci: Unknown symbol rt2x00mac_add_interface (err 0)
[ 32.427999] rt2800pci: Unknown symbol rt2800_enable_radio (err 0)
[ 32.428013] rt2800pci: Unknown symbol rt2800_reset_tuner (err 0)
[ 32.428026] rt2800pci: Unknown symbol rt2x00mac_get_stats (err 0)
[ 32.428039] rt2800pci: Unknown symbol rt2800_validate_eeprom (err 0)
[ 32.428069] rt2800pci: Unknown symbol rt2x00pci_flush_queue (err 0)
[ 32.428083] rt2800pci: Unknown symbol rt2800_link_stats (err 0)
[ 32.428102] rt2800pci: Unknown symbol rt2800_rfkill_poll (err 0)
[ 32.428115] rt2800pci: Unknown symbol rt2800_txdone_entry (err 0)
[ 32.428129] rt2800pci: Unknown symbol rt2800_probe_hw_mode (err 0)
[ 32.428142] rt2800pci: Unknown symbol rt2800_read_eeprom_efuse (err 0)
[ 32.428156] rt2800pci: Unknown symbol rt2x00pci_initialize (err 0)
[ 32.428170] rt2800pci: Unknown symbol rt2x00mac_set_key (err 0)
[ 32.428183] rt2800pci: Unknown symbol rt2800_efuse_detect (err 0)
[ 32.428196] rt2800pci: Unknown symbol rt2800_config_filter (err 0)
[ 32.428209] rt2800pci: Unknown symbol rt2800_conf_tx (err 0)
[ 32.428222] rt2800pci: Unknown symbol rt2x00mac_sw_scan_start (err 0)
[ 32.428236] rt2800pci: Unknown symbol rt2x00mac_tx_frames_pending (err 0)
[ 32.428249] rt2800pci: Unknown symbol rt2800_check_firmware (err 0)
[ 32.428263] rt2800pci: Unknown symbol rt2800_mcu_request (err 0)
[ 32.428282] rt2800pci: Unknown symbol rt2800_init_eeprom (err 0)
[ 32.428296] rt2800pci: Unknown symbol rt2800_config_pairwise_key (err 0)
[ 32.428310] rt2800pci: Unknown symbol rt2x00pci_uninitialize (err 0)
[ 32.428323] rt2800pci: Unknown symbol rt2x00queue_get_entry (err 0)
[ 32.428336] rt2800pci: Unknown symbol rt2x00pci_suspend (err 0)
[ 32.428350] rt2800pci: Unknown symbol rt2800_clear_beacon (err 0)
[ 32.428372] rt2800pci: Unknown symbol rt2800_get_tsf (err 0)
[ 32.428385] rt2800pci: Unknown symbol rt2x00pci_remove (err 0)
[ 32.428398] rt2800pci: Unknown symbol rt2x00mac_remove_interface (err 0)
[ 32.428418] rt2800pci: Unknown symbol rt2800_load_firmware (err 0)
[ 32.428432] rt2800pci: Unknown symbol rt2x00mac_config (err 0)
[ 32.428461] rt2800pci: Unknown symbol eeprom_93cx6_multiread (err 0)
[ 32.428475] rt2800pci: Unknown symbol rt2x00mac_start (err 0)
[ 32.428488] rt2800pci: Unknown symbol rt2x00mac_rfkill_poll (err 0)
[ 32.428501] rt2800pci: Unknown symbol rt2800_process_rxwi (err 0)
[ 32.428514] rt2800pci: Unknown symbol rt2x00mac_stop (err 0)
[ 32.428527] rt2800pci: Unknown symbol rt2800_link_tuner (err 0)
[ 32.428545] rt2800pci: Unknown symbol rt2x00pci_regbusy_read (err 0)
[ 32.428558] rt2800pci: Unknown symbol rt2800_config_intf (err 0)
[ 32.428572] rt2800pci: Unknown symbol rt2800_set_rts_threshold (err 0)
[ 32.428586] rt2800pci: Unknown symbol rt2800_wait_wpdma_ready (err 0)
[ 32.428605] rt2800pci: Unknown symbol rt2x00mac_configure_filter (err 0)
[ 32.428619] rt2800pci: Unknown symbol rt2x00mac_flush (err 0)
[ 32.428631] rt2800pci: Unknown symbol rt2x00lib_pretbtt (err 0)
[ 32.428645] rt2800pci: Unknown symbol rt2800_get_tkip_seq (err 0)
[ 32.428658] rt2800pci: Unknown symbol rt2800_write_tx_data (err 0)
[ 32.428671] rt2800pci: Unknown symbol rt2800_disable_radio (err 0)
[ 32.428684] rt2800pci: Unknown symbol rt2800_ampdu_action (err 0)
[ 32.428698] rt2800pci: Unknown symbol rt2800_config_ant (err 0)
[ 32.428711] rt2800pci: Unknown symbol rt2x00mac_tx (err 0)
[ 32.428724] rt2800pci: Unknown symbol rt2x00pci_resume (err 0)
[ 32.428741] rt2800pci: Unknown symbol rt2800_config (err 0)
[ 32.428760] rt2800pci: Unknown symbol rt2x00pci_probe (err 0)
[ 32.428785] rt2800pci: Unknown symbol rt2800_write_beacon (err 0)
[ 32.428799] rt2800pci: Unknown symbol rt2800_gain_calibration (err 0)
[ 32.428817] rt2800pci: Unknown symbol rt2800_get_survey (err 0)
[ 32.428831] rt2800pci: Unknown symbol rt2x00pci_rxdone (err 0)
[ 32.428844] rt2800pci: Unknown symbol rt2x00lib_beacondone (err 0)
[ 32.428862] rt2800pci: Unknown symbol rt2800_config_erp (err 0)
[ 32.428875] rt2800pci: Unknown symbol rt2x00mac_get_ringparam (err 0)
[ 32.428889] rt2800pci: Unknown symbol rt2x00mac_bss_info_changed (err 0)
[ 33.462612] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 33.464001] EXT3-fs (sda1): using internal journal
[ 34.382547] Adding 524284k swap on /swapfile.img. Priority:-1 extents:133 across:541292k
[ 41.269252] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 48.969832] NET: Registered protocol family 10
[ 53.394371] i2c_mv64xxx: Unknown symbol i2c_add_numbered_adapter (err 0)
[ 53.394394] i2c_mv64xxx: Unknown symbol i2c_del_adapter (err 0)
[ 53.545873] lm63: Unknown symbol hwmon_device_register (err 0)
[ 53.545922] lm63: Unknown symbol i2c_register_driver (err 0)
[ 53.545981] lm63: Unknown symbol hwmon_device_unregister (err 0)
[ 53.545996] lm63: Unknown symbol i2c_smbus_write_byte_data (err 0)
[ 53.546011] lm63: Unknown symbol i2c_del_driver (err 0)
[ 53.546032] lm63: Unknown symbol i2c_smbus_read_byte_data (err 0)
[ 59.846619] eth0: no IPv6 routers present
[lulo@lulo-iconnect ~]$ yaourt
błąd: nie podano żadnej operacji (użyj -h aby otrzymać pomoc)
[lulo@lulo-iconnect ~]$ yaourt -SQ module-init-tools
[lulo@lulo-iconnect ~]$ yaourt -Q module-init-tools
[lulo@lulo-iconnect ~]$ pacman -Q module-init-tools
błąd: pakiet 'module-init-tools' nie został odnaleziony
[lulo@lulo-iconnect ~]$ yaourt module-init-tools
1 core/kmod 4-1 [installed]
Linux kernel module handling
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==>
[lulo@lulo-iconnect ~]$ lsmod
Module Size Used by
ipv6 254163 12
mv_cesa 9021 0
[lulo@lulo-iconnect ~]$

NOT INSERT ANY MODULES

LM63

[lulo@lulo-iconnect ~]$ sudo modprobe lm63
Hasło:
[lulo@lulo-iconnect ~]$ sudo modprobe -v lm63
insmod /lib/modules/3.1.10-1-ARCH/kernel/drivers/hwmon/lm63.ko.gz
[lulo@lulo-iconnect ~]$ sudo modprobe -fv lm63
insmod /lib/modules/3.1.10-1-ARCH/kernel/drivers/hwmon/lm63.ko.gz
[lulo@lulo-iconnect ~]$ lsmod
Module Size Used by
ipv6 254163 12
mv_cesa 9021 0
[lulo@lulo-iconnect ~]$ cd /lib/modules/3.1.10-1-ARCH/kernel/drivers/hwmon
[lulo@lulo-iconnect hwmon]$ ls
hwmon.ko.gz lm63.ko.gz lm75.ko.gz lm77.ko.gz lm90.ko.gz
[lulo@lulo-iconnect hwmon]$ sudo insmod -f lm63.ko.gz
Error: could not insert module lm63.ko.gz: Unknown symbol in module

IOMEGA ICONNECT - WIFI

[lulo@lulo-iconnect hwmon]$ sudo modprobe -fv rt2x00pci
insmod /lib/modules/3.1.10-1-ARCH/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko.gz
[lulo@lulo-iconnect hwmon]$ cd /lib/modules/3.1.10-1-ARCH/kernel/drivers/net/wireless/rt2x00
[lulo@lulo-iconnect rt2x00]$ sudo insmod -f rt2x00pci.ko.gz
Error: could not insert module rt2x00pci.ko.gz: Unknown symbol in module
[lulo@lulo-iconnect rt2x00]$


')

Maybe kmod-4.1 not compatybile from 3.1* ?...backport kmod from module-init-tools...maybe

[WarheadsSE]

backport .. I think is the wrong phrase.

And yes, kmod not properly handling dependencies is severe issue.

[lulo]

http://openrouter.info/forum/viewtopic. ... 767#p13767 ... linux working again..."backport" (replacement) kmod-4.1 to module-init-tools-3.16-3-arm...ufffffff....


hmmm...ok W...I'am back (replacement) kmod to module-init-tools...every working normaly...again

[WarheadsSE]

backport is the wrong phrase.

You mean downgrade or roll-back.

Backport denotes porting features back down to prior version trees of the same software, not entire replacement or reversion.