Trying to install uBoot on POGO-E01

[peboer]

I've been trying to get this work for some time, and decided to try the older version:
http://jeff.doozan.com/debian/uboot/
on on mtd3.
I get a reasonably successful status until the end:
`
# Installing nanddump...
Connecting to jeff.doozan.com (69.163.187.226:80)
nanddump.md5 100% |*******************************| 43 --:--:-- ETA
Connecting to jeff.doozan.com (69.163.187.226:80)
nanddump 100% |*******************************| 21286 --:--:-- ETA
# Successfully installed nanddump.

# Installing flash_erase...
Connecting to jeff.doozan.com (69.163.187.226:80)
flash_erase.md5 100% |*******************************| 46 --:--:-- ETA
Connecting to jeff.doozan.com (69.163.187.226:80)
flash_erase 100% |*******************************| 12819 --:--:-- ETA
# Successfully installed flash_erase.

# Attempting to auto-detect your device...Dockstar detected

# Installing uBoot
Connecting to jeff.doozan.com (69.163.187.226:80)
uboot.mtd3.bin.md5 100% |*******************************| 49 --:--:-- ETA
Connecting to jeff.doozan.com (69.163.187.226:80)
uboot.mtd3.bin 100% |*******************************| 512k 00:00:00 ETA
Erase Total 4 Units
Performing Flash Erase of length 131072 at offset 0x60000 done
Writing data to block 0
Writing data to block 20000
Writing data to block 40000
Writing data to block 60000
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00080000...
## Verifying new uBoot...
Connecting to jeff.doozan.com (69.163.187.226:80)
uboot.mtd3.bin.md5 100% |*******************************| 49 --:--:-- ETA
# Verified successfully!

# Installing uBoot environment
Connecting to jeff.doozan.com (69.163.187.226:80)
wget: server returned error: HTTP/1.1 404 Not Found
Connecting to jeff.doozan.com (69.163.187.226:80)
wget: server returned error: HTTP/1.1 404 Not Found
## Could not install uBoot environment, exiting
`
So it looks like the needed file was moved, and the shell script needs to be moved. Seems like this has sorta bricked my pogoplug: if I attach a drive and try to access it via my.pogoplug.com, it claims that no drive is attached. Sigh.

Any help for me?