2.6.31 rebuild : give me your .configs

[braklisz]

Oh, ppl actually flash stuff to NAND on PROs now? I must have missed that reading the forums only once or twice a month

I misunderstood your intentions, thought this thread's for compiling new modules only (good ol'module pack). That's why I was paying attention that all the config changes are marked as modules and not compiled statically into kernel's image.

Cheers to flashing stuff then, I'll wait untill it's final.

So what's left to add are: PKG's NFS support (v3 was there already but you need v4 and NFSD..?), Geoff's HID support, EricBetts's dongle *cough, cough*, if I am reading it all correctly? After that we're good to go?

@Geoff: CONFIG_CRYPTO_AES=y was enabled by default. XTS was added in my config, not sure about the "plain" thingy you reffered to. The only crypto-hardware module that's in that kernel version was added as well.

[WarheadsSE]

The problem is symbols in the kernel aren't there unless it's all turned on at image compilation. Hence the need.

[Draradech]

Please add CONFIG_USB_NET_CDCETHER (depends on CONFIG_USB_USBNET). Both available as module.

[digitlman]

$this->bbcode_second_pass_quote('WarheadsSE', 'B')ecause those using a NAND install will need to flash this, I'm going to have to do this as few times as possible

[WarheadsSE]

It is the case, but let me put it this way:

Do you feel like re-flashing the same address in NAND 10x until we get every-last-thing there?

[digitlman]

$this->bbcode_second_pass_quote('WarheadsSE', 'I')t is the case, but let me put it this way:

Do you feel like re-flashing the same address in NAND 10x until we get every-last-thing there?

[shankargopal]

This is wonderful news. Thanks very, very much, WarheadSE.

Unfortunately I do not have the kernel source on my machine so can't give you a .config itself. But I looked up stuff from kernel.xc.net and it seems the following options would make my day:

CONFIG_USB_ACM (for the cdc_acm driver)
CONFIG_USB (for the usbcore module)
CONFIG_BT_HCIBTUSB (for the btusb driver)

As mentioned in a different thread, the idea is to be enable the Pogoplug to connect to a mobile phone.

Thanks a great deal!

Edit: Out of these three, only CONFIG_USB_ACM needs to be changed in kwave's .config - the other two are already on.

[Arktronic]

I can't give you the full config because I didn't have it created when I killed my pogoplug (still waiting for the serial cable to arrive). But thanks to the previous commenter's helpful pointer to kernel.xc.net, it looks like I just need:
CONFIG_USB_VIDEO_CLASS
and
CONFIG_USB_SERIAL_FTDI_SIO

Thanks!

[braklisz]

M'key, kwave's .config + my previous changes (from Wed Feb 29, 2012 12:37 pm message) + all of the following is here:

http://www.2shared.com/file/CtjWG4Yh/co ... ndall.html

PKG's NFS support:
[*] NFS client support for NFS version 4 (EXPERIMENTAL)
<M> NFS server support
-*- NFS server support for NFS version 3
[*] NFS server support for the NFSv3 ACL protocol extension
[*] NFS server support for NFS version 4 (EXPERIMENTAL)

Geoff's HID (UPS) support (without force feedback joystics, right..?):
--- HID Devices
{M} Generic HID support
[*] HID debugging support
[*] /dev/hidraw raw HID device support
*** USB Input Devices ***
<M> USB Human Interface Device (full HID) support
[ ] PID device support (NEW)
[ ] /dev/hiddev raw HID device support (NEW)

EricBetts's, kehem, dongle:
<M> Realtek 8187 and 8187B USB support

Draradech's cable modems:
<M> Multi-purpose USB Networking Framework
<M> ASIX AX88xxx Based USB 2.0 Ethernet Adapters (NEW)
-M- CDC Ethernet support (smart devices such as cable modems)
< > CDC EEM support (NEW)
< > Davicom DM9601 based USB 1.1 10/100 ethernet devices (NEW)
< > SMSC LAN95XX based USB 2.0 10/100 ethernet devices (NEW)
< > GeneSys GL620USB-A based cables (NEW)
<M> NetChip 1080 based cables (Laplink, ...) (NEW)
< > Prolific PL-2301/2302 based cables (NEW)
< > MosChip MCS7830 based Ethernet adapters (NEW)
< > Host for RNDIS and ActiveSync devices (EXPERIMENTAL) (NEW)
<M> Simple USB Network Links (CDC Ethernet subset) (NEW)
[ ] ALi M5632 based 'USB 2.0 Data Link' cables (NEW)
[ ] AnchorChips 2720 based cables (Xircom PGUNET, ...) (NEW)
[*] eTEK based host-to-host cables (Advance, Belkin, ...) (NEW)
[*] Embedded ARM Linux links (iPaq, ...) (NEW)
[ ] Epson 2888 based firmware (DEVELOPMENT) (NEW)
[ ] KT Technology KC2190 based cables (InstaNet) (NEW)
<M> Sharp Zaurus (stock ROMs) and compatible (NEW)
< > Intellon PLC based usb adapter (NEW

shankargopal's USB modem:
<M> USB Modem (CDC ACM) support

Arktronic's request:
<M> USB FTDI Single Port Serial Driver

[WarheadsSE]

I will also add the PL2303 chipsets for those with CA-42's, etc.

Telzey has done some backporting of my LED class driver, as well as merging the Iomega/Medion 2.6.31.14 code, so this will likely turn out to be a slight bump as well.