look at the link in the post above. If you are a newbiew, you shouldn't be messing with nand. If you are still up for this and ok with bricking your device and have the serial to recover and so on... then look in the doozan forum (link above)
Download the kernel
$this->bbcode_second_pass_code('', 'wget https://www.kernel.org/pub/linux/kernel/v3.0/linux-3.1.10.tar.bz2 ')
extract it
$this->bbcode_second_pass_code('', 'tar xvjf linux-3.1.10.tar.bz2')
Download all pathes including the one for nand
$this->bbcode_second_pass_code('', 'cd linux-3.1.10
wget http://dev.shyd.de/dockstar/dockstar-goflex-3.1.10.patch
wget <url>
.
.
.')
Archlinux specific patches can be found here:
https://github.com/archlinuxarm/PKGBUIL ... core/linuxApply patches:
$this->bbcode_second_pass_code('', 'patch -p1 < dockstar-goflex-3.1.10.patch
patch -p1 < <patch file>
.
.
.')
Get the config file at
https://github.com/archlinuxarm/PKGBUIL ... core/linuxdo
$this->bbcode_second_pass_code('', 'make uImage
make modules
make modules_install')
Backup your old uImage in /boot
$this->bbcode_second_pass_code('', 'mv /boot/uImage /boot/uImage.old')
Copy the new uImage
$this->bbcode_second_pass_code('', 'cp ./arch/arm/boot/uImage /boot/uImage')
Reboot and hope everything went fine