Hi,
I recently tried to do this installation for the first time on my pogoplug pro device and ran into an issue right after the first reboot on step 12 of your instructions page (http://archlinuxarm.org/platforms/armv6 ... provideov3). Ever since then I am unable to login back to the device using SSH and so far have tried nearly most of the possible solutions provided in this forum and have no luck so far.
The good news is however the device appears on the N/W everytime I tried it reboot it but I did manage to run some scripts during startup to capture netstat and ps outputs and I found out that ssh daemon never even attempted to start. Like mentioned on many other posts, my device starts up with the blinking GREEN LED for 15-20 secs and then it stops.
I even tried to configure a static ip and that too didnt resolve the issue. I also tried to use another flash usb stick with a fresh copy of the rootfs and that failed too.
I desperately need your help to resolve this issue or atleast revert my device back to factory defaults.
Thanks,
Karthik