[How-To] Boot Entirely from SATA

[Socaltom]

I moved to my other drive, and using the 05-2012 fS I'm in. with the 12-2012, I booted ( actually got new entries in the logs) but I couldn't get an IP.

Now I'll try and get the big drive working.
Thanks
Tom

[baranrj]

Has anyone investigated using a sata cdrom/dvd burner/rom as a boot-up device? This could make us noobs lives a lot simpler. I guess the first step is to see if the pogplug pro's bios (not to be confused with the NAND memory) supports the "El Torito Bootable CD Specification". The next step would be for one of the archlinux arm gods to develop a "live CD" ISO image that us noobs could download. If this works, the sky is the limit, beyond the clouds!

[WarheadsSE]

There is no "BIOS" on these devices. An the BOM code can't read filesystems. It is not possible without major modifications.

[baranrj]

By bios, I meant the "tiny ROM that reads from SATA, then SPI, then NAND", and I guess you"re saying that it doesn't support the "el torito" specification. That's too bad.

Thank you for your reply.

[WarheadsSE]

By tiny, I mean really tiny. It won't be able to read the CDROM existing, let alone el-torito

[darkside401]

Hi there,
first thanks for this great Guide here WarheadsSE, now my Pogoplug P24 is running Alarm.

I just took me some time, because althought i followed your guide briefly i first was not able to boot from the Sata drive.

After some hours of testing i have overwritten the uImage.no-pci from the tarball on the first page with that one from the current Archlinux tarball (in the folder /boot) and rerun the disk_create script.

Now my Pogoplug boots without problems into Alarm.

Maybe that is a hint for some others if they got stuck getting Alarm to start from Sata.

[morph027]

$this->bbcode_second_pass_quote('leckmaul666', 'i') got it
pls try the older oxnas version.
i got success with :05-2012 oxnas
then the kernel worked for me
i got ssh coennection.

[zampara]

Hi, i get also
led blinks wildly and then TURNS OFF,

Commands (with su et no sudo):
$this->bbcode_second_pass_code('', '# ./disk_create (with no pci pogo B04) ')
→ but i didn't get error from dd about the uImage not writing, yet there is no partitions on sata disk !!.


After partitionning:
$this->bbcode_second_pass_code('', '
(parted) print free
Modèle: OCZ-VERT EX v1.10 (scsi)
Disque /dev/sdb : 62533296s
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos

Numéro Début Fin Taille Type Système de fichiers Fanions
63s 2047s 1985s Espace libre
1 2048s 20479s 18432s primary
2 20480s 62533295s 62512816s primary

# mke2fs -J -L rootfs /dev/sdb2


# ./disk_create
0+1 enregistrements lus
0+1 enregistrements écrits
444 octets (444 B) copiés, 0,0331372 s, 13,4 kB/s
Writing stage 1
14+1 enregistrements lus
14+1 enregistrements écrits
7576 octets (7,6 kB) copiés, 0,00456678 s, 1,7 MB/s
Writing uboot
253+1 enregistrements lus
253+1 enregistrements écrits
129852 octets (130 kB) copiés, 0,0326747 s, 4,0 MB/s
Writing kernel to
4164+1 enregistrements lus
4164+1 enregistrements écrits
2132324 octets (2,1 MB) copiés, 0,425791 s, 5,0 MB/s
')

After mounting /dev/sdb2
$this->bbcode_second_pass_code('', '# tar xvzf ArchLinuxARM-oxnas-latest.tar.gz
#nano /mount_point..../usr/local/mac_addr ← putting mac
#sync
#umount')

After booting on sata led blinks wildly f and then turns off.

Here the output with serial
$this->bbcode_second_pass_code('', 'Stage-1 Bootloader Mon Nov 14 22:36:34 EST 2011
Attempting to set PLLA to 850MHz ...
plla_ctrl0 : 0x0000020A
plla_ctrl1 : 0x00330000
plla_ctrl2 : 0x0065008B
plla_ctrl3 : 0x000000F1
PLLA Set

Setup memory, testing
Reading disk 0, Image 0
Sector : 0x0000009A
Hdr len: 0x0001FB34
Hdr CRC: 0x2229BDCD
OK
Initialising disks
SATA PHY not ready for device 1
Detecting SATA busses:
Bus 0: Found first device OK
Device 0: Model: OCZ-VERTEX v1.10 Firm: 1370 Ser#: P345S0466W3VL5Q9B3PW
Type: Hard Disk
Capacity: 30533.8 MB = 29.8 GB (62533296 x 512)
Device 1: not available
Failed to read valid environment from disk, using built-in default


U-Boot 1.1.2 (Dec 31 2011 - 15:24:45)

U-Boot code: 60E00000 -> 60E1FB34 BSS: -> 60E5435C
RAM Configuration:
Bank #0: 60000000 128 MB
SRAM Configuration:
64KB at 0x50000000
NAND:128 MiB
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Setting Linux mem= boot arg value

IDE read: device 0 block # 288, count 1 ... 1 blocks read: OK
Hit any key to stop autoboot: 0

Loading from IDE device 0, partition 1: Name: hda1
Type: U-Boot
Image Name: Linux-2.6.31.6_SMP_820
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2159884 Bytes = 2.1 MB
Load Address: 60008000
Entry Point: 60008000
## Booting image at 60500000 ...
Image Name: Linux-2.6.31.6_SMP_820
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2159884 Bytes = 2.1 MB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................... done, booting the kernel.
[ 0.000000] Linux version 2.6.31.6_SMP_820 (root@ProDev) (gcc version 4.6.0 20110429 (prerelease) (GCC) ) #100 SMP Sun May 29 04:53:45 EDT 2011
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Oxsemi NAS
[ 0.000000] 1 memory region
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: root=/dev/sda2 console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 rootwait ubi.mtd=2,512 mem=128M poweroutage=yes
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 125496KB available (3692K code, 291K data, 124K init, 0K highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:96
[ 0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[ 0.010000] Console: colour dummy device 80x30
[ 0.010000] console [ttyS0] enabled
[ 0.020000] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.240000] Security Framework initialized
[ 0.240000] Mount-cache hash table entries: 512
[ 0.250000] CPU: Testing write buffer coherency: ok
[ 0.250000] Calibrating local timer... 424.49MHz.
[ 0.320000] CPU1: Booted secondary processor
[ 0.420000] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.630000] Brought up 2 CPUs
[ 0.640000] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.650000] NET: Registered protocol family 16
[ 0.650000] Number of DMA channels = 4, version = 4
[ 0.660000] Reserving a DMA channel for DirectRAID
[ 0.660000] Allocating 389 SRAM generic DMA descriptors
[ 0.680000] bio: create slab <bio-0> at 0
[ 0.680000] SCSI subsystem initialized
[ 0.690000] usbcore: registered new interface driver usbfs
[ 0.690000] usbcore: registered new interface driver hub
[ 0.700000] usbcore: registered new device driver usb
[ 0.750000] NET: Registered protocol family 2
[ 0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.760000] Switched to NOHz mode on CPU #0
[ 0.760000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.760000] Switched to NOHz mode on CPU #1
[ 0.770000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.780000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.780000] TCP reno registered
[ 0.790000] NET: Registered protocol family 1
[ 0.790000] Create fragment cache
[ 0.800000] fuse init (API version 7.12)
[ 0.800000] msgmni has been set to 245
[ 0.810000] alg: No test for stdrng (krng)
[ 0.810000] io scheduler noop registered
[ 0.820000] io scheduler anticipatory registered
[ 0.820000] io scheduler deadline registered
[ 0.830000] io scheduler cfq registered (default)
[ 0.850000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.850000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[ 0.870000] brd: module loaded
[ 0.880000] loop: module loaded
[ 0.880000] ox820sata: OX820 sata core.
[ 0.880000] scsi0 : oxnassata
[ 0.890000] scsi1 : oxnassata
[ 0.890000] ata1: SATA max UDMA/133 irq 50
[ 0.890000] ata2: SATA max UDMA/133 irq 50
[ 0.900000] ox820sata: reseting SATA core
[ 1.420000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.420000] ata1.00: ATA-7: OCZ-VERTEX v1.10, 1370, max UDMA/133
[ 1.430000] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.430000] ata1.00: configured for UDMA/133
[ 1.440000] ox820sata: reseting SATA core
[ 2.150000] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.150000] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX v1.10 1370 PQ: 0 ANSI: 5
[ 2.160000] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.170000] sd 0:0:0:0: [sda] Write Protect is off
[ 2.170000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.180000] tun: Universal TUN/TAP device driver, 1.6
[ 2.180000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.180000] NAND: Page read time 40ms
[ 2.180000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[ 2.180000] Scanning device for bad blocks
[ 2.240000] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[ 2.250000] 0x000000000000-0x000000e00000 : "boot"
[ 2.250000] sda: sda1 sda2
[ 2.260000] 0x000000e00000-0x000008000000 : "rootfs"
[ 2.260000] UBI: attaching mtd2 to ubi0
[ 2.260000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.270000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 2.280000] UBI: logical eraseblock size: 129024 bytes
[ 2.280000] UBI: smallest flash I/O unit: 2048
[ 2.290000] UBI: sub-page size: 512
[ 2.290000] UBI: VID header offset: 512 (aligned 512)
[ 2.300000] UBI: data offset: 2048
[ 2.650000] UBI: attached mtd2 to ubi0
[ 2.660000] UBI: MTD device name: "rootfs"
[ 2.660000] UBI: MTD device size: 114 MiB
[ 2.670000] UBI: number of good PEBs: 912
[ 2.670000] UBI: number of bad PEBs: 0
[ 2.680000] UBI: max. allowed volumes: 128
[ 2.680000] UBI: wear-leveling threshold: 4096
[ 2.680000] UBI: number of internal volumes: 1
[ 2.690000] UBI: number of user volumes: 1
[ 2.690000] UBI: available PEBs: 0
[ 2.700000] UBI: total number of reserved PEBs: 912
[ 2.700000] UBI: number of PEBs reserved for bad PEB handling: 9
[ 2.710000] UBI: max/mean erase counter: 1/0
[ 2.710000] UBI: image sequence number: 0
[ 2.720000] UBI: background thread "ubi_bgt0d" started, PID 304
[ 2.720000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.720000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
[ 2.720000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
[ 2.750000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x00000000
[ 2.770000] oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00
[ 2.770000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.780000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.780000] usb usb1: Product: OXNAS EHCI Host Controller
[ 2.790000] usb usb1: Manufacturer: Linux 2.6.31.6_SMP_820 ehci_hcd
[ 2.800000] usb usb1: SerialNumber: usb
[ 2.800000] usb usb1: configuration #1 chosen from 1 choice
[ 2.810000] hub 1-0:1.0: USB hub found
[ 2.810000] hub 1-0:1.0: 2 ports detected
[ 2.810000] Initializing USB Mass Storage driver...
[ 2.820000] usbcore: registered new interface driver usb-storage
[ 2.830000] USB Mass Storage support registered.
[ 2.830000] mice: PS/2 mouse device common for all mice
[ 2.840000] TCP cubic registered
[ 2.840000] NET: Registered protocol family 10
[ 2.840000] NET: Registered protocol family 17
[ 2.850000] RPC: Registered udp transport module.
[ 2.850000] RPC: Registered tcp transport module.
[ 2.860000] kjournald starting. Commit interval 5 seconds
[ 2.870000] EXT3 FS on sda2, internal journal
[ 2.870000] EXT3-fs: recovery complete.
[ 2.880000] EXT3-fs: mounted filesystem with writeback data mode.
[ 2.880000] VFS: Mounted root (ext3 filesystem) on device 8:2.
[ 2.890000] Freeing init memory: 124K
INIT: version 2.88 booting
[ 3.140000] usb 1-1: new high speed USB device using oxnas-ehci and address 2
HOSTNAME= is deprecated. See rc.conf(5) and hostname(5) for details.

> [ 3.290000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Arch Linux ARM
[ 3.290000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

3.300000] usb 1-1: Product: USB2.0 Hub
m > 3.310000] usb 1-1: configuration #1 chosen from 1 choice
;10m hub 1-1:1.0: USB hub found
[1mhttp://a[ 3.320000] hub 1-1:1.0: 4 ports detected
rchlinuxarm.org/

------------------------------
mount: unknown filesystem type 'devtmpfs'
:: Mounting root read-only [DONE]
:: Setting hostname: alarm [DONE]
HARDWARECLOCK= is deprecated. See rc.conf(5) and hwclock(8) for details.
:: Adjusting system time and setting kernel time zone [BUSY] TIMEZONE= is deprecated. See rc.conf(5) for details.
[DONE]
:: Starting udev daemon [DONE]
:: Triggering udev uevents [DONE]
:: Loading user-specified modules [BUSY] MODULES= is deprecated. See rc.conf(5) and modules-load.d(5) for details.
[ 3.950000] Probing for Synopsis GMAC, unit 0
[ 3.960000] eth0: Tuning GMAC 0 RGMII timings
[ 3.970000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[ 4.000000] eth0: GMAC ver = 53, vendor ver = 18 at 0xed400000, IRQ 40
[ 4.000000] eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
[ 4.010000] eth0: Ethernet addr: 00:30:e0:00:00:00
[ 4.010000] probe() eth0: Leon x2 clock
[DONE]
:: Waiting for udev uevents to be processed [DONE]
:: Configuring virtual consoles [BUSY] Failed to open /dev/tty0: No such file or directory
[FAIL]
:: Bringing up loopback interface [DONE]
:: Checking filesystems [BUSY] /etc/rc.sysinit: line 120: /dev/stdout: Read-only file system
[DONE internal journal FS on sda2, m]

:: Remounting root and API filesystems [DONE]
:: Mounting local filesystems [DONE]
:: Activating swap [DONE]
:: Configuring time zone [DONE]
:: Initializing random seed [BUSY] Failed to open /dev/urandom: No such file or directory
[FAIL]
:: Removing leftover files [DONE]
INIT: Entering runlevel: 3
mount: mount point /proc/sys/fs/binfmt_misc does not exist
:: Setting MAC address [BUSY] [ 4.990000] Turning off blinking LED.
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
Error at line 79, file plx/devmem2.c (2) [No such file or directory]
[ 5.300000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[ 5.300000] CoPro offload is active on eth0
[ 5.310000] Alloc'ing ARM descs 8192 bytes
[ 5.310000] Alloc'ing CoPro parameters 36 bytes
[ 5.310000] gmac gmac.0: firmware: requesting gmac_copro_firmware
[ 5.330000] CoPro: Programming start address as 0xd000e000
[ 5.430000] eth0: Resetting GMAC
[ 5.440000] eth0: GMAC reset complete
[ 5.440000] eth0: Setting Rx flow control thresholds for LAN port
[ 6.000000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[ 6.500000] eth0: link down
[ 8.460000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[DONE]
[ 8.500000] eth0: link up, 100Mbps, full-duplex, using pause, lpa 0x45E1
[ 8.500000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.530000] Unable to handle kernel NULL pointer dereference at virtual address 00000019
[ 8.530000] pgd = c0004000
[ 8.540000] [00000019] *pgd=00000000
[ 8.540000] Internal error: Oops: 17 [#1] SMP
[ 8.540000] Modules linked in: bootled_module gmac mii
[ 8.540000] CPU: 0 Not tainted (2.6.31.6_SMP_820 #100)
[ 8.540000] PC is at copro_hard_start_xmit+0x14/0x3e4 [gmac]
[ 8.540000] LR is at dev_hard_start_xmit+0x244/0x2f0
[ 8.540000] pc : [<bf0043cc>] lr : [<c0248e88>] psr: 60000113
[ 8.540000] sp : c03ddcc8 ip : c5e1f000 fp : c5e1f000
[ 8.540000] r10: 00000000 r9 : bf009854 r8 : c559d0a0
[ 8.540000] r7 : c041c8e0 r6 : c041c844 r5 : c5e1f000 r4 : c559d0a0
[ 8.540000] r3 : 00000001 r2 : 00000000 r1 : c5e1f000 r0 : c559d0a0
[ 8.540000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 8.540000] Control: 00c5787d Table: 65eb800a DAC: 00000017
[ 8.540000] Process swapper (pid: 0, stack limit = 0xc03dc270)
[ 8.540000] Stack: (0xc03ddcc8 to 0xc03de000)
[ 8.540000] dcc0: ffffffff ffffffff 00000006 ffffffff 00000000 00000000
[ 8.630000] dce0: 00000000 c559d0a0 c5e1f000 c041c844 c041c8e0 c5e063a0 bf009854 00000000
[ 8.630000] dd00: c5e1f000 c0248e88 00000000 00000000 c5ed7bc0 c559d0a0 c5e063a0 c5e1f000
[ 8.630000] dd20: c5ed7c1c c5e063a0 00000000 c02576ec ffff8e25 c03dc000 00000020 c559d0a0
[ 8.630000] dd40: 00000000 c5ed7c1c c5ed7bc0 00000000 c5ed0984 c5ed0980 c5e1f000 c02491d4
[ 8.630000] dd60: c559d0a0 c5fb7940 c5fb7964 0000000e c5e1f000 c024f8a4 00000000 0000004c
[ 8.630000] dd80: 00000081 c559d0a0 00000000 c5dbc2a0 c041c484 c559d0a0 c5f7a040 c5fb6a60
[ 8.630000] dda0: c02c5210 c02aa4f8 c559d0a0 c559d0a0 c5dbc2a0 c041c484 0000004c c5f7a040
[ 8.630000] ddc0: c5fb6a60 c02abe78 c041f24c ffff99dd c041c484 c02c5210 00000000 00000000
[ 8.630000] dde0: c5fb6a60 c03dde64 c03dc000 c5dbc2a0 c041c484 c559d0a0 c03dc000 c5dbc2a0
[ 8.630000] de00: c041c484 0000004c c5f7a040 0000001c c02c5210 c02c41dc 00000000 00000002
[ 8.630000] de20: 00000000 c5e2fbf4 00000002 00000000 00000000 000002ff 00000000 00000000
[ 8.630000] de40: 16000000 00000000 00000000 00000000 00000000 00000000 0000003a 0000008f
[ 8.630000] de60: 00000000 c5fb6a60 00000000 c559d0a0 c5d8e714 00000005 00000000 c5dbc2a0
[ 8.630000] de80: 00000001 c02c53d8 00000001 c04108e0 00000008 c5dbc2f4 c0532050 c040f400
[ 8.630000] dea0: c03dc000 00200200 00000100 c03de080 00000000 c040fc0c c02c5210 c0050c74
[ 8.750000] dec0: 1f975f77 c03ddec8 c03ddec8 c03ddec8 c04108e0 00000081 c03de044 c03dc000
[ 8.750000] dee0: 00000100 c0021528 c03de040 c040f2a0 00000000 c004c13c 1f974177 c0066974
[ 8.750000] df00: 00000001 0000000a 1f974177 c03dc000 c0401060 c0021b00 00000000 c040f2a0
[ 8.750000] df20: c0022180 c03e1d80 c0401040 c004c594 c03dc000 c0027290 ffffffff f4000100
[ 8.750000] df40: 0000001d c03dc000 c0021000 c0027af8 00000001 00000000 c03ddf98 00000000
[ 8.790000] df60: c03dc000 c04012c4 c03e203c c03dc000 c0021000 c0022180 c03e1d80 c0401040
[ 8.790000] df80: 00000000 c03ddf98 c0028a1c c0028a20 60000013 ffffffff c00289fc c0028be8
[ 8.790000] dfa0: 00000000 c04142e4 c053a000 00004000 c040f280 c0008a10 c0008354 00000000
[ 8.790000] dfc0: 00000000 c03e1d80 00000000 c0022f90 00000000 00c5387d c04017b0 c0023394
[ 8.790000] dfe0: c03e2034 6001fda8 410fb025 6001fd74 00000000 60008084 00000000 00000000
[ 8.790000] [<bf0043cc>] (copro_hard_start_xmit+0x14/0x3e4 [gmac]) from [<c0248e88>] (dev_hard_start_xmit+0x244/0x2f0)
[ 8.790000] [<c0248e88>] (dev_hard_start_xmit+0x244/0x2f0) from [<c02576ec>] (__qdisc_run+0x110/0x264)
[ 8.790000] [<c02576ec>] (__qdisc_run+0x110/0x264) from [<c02491d4>] (dev_queue_xmit+0x2a0/0x40c)
[ 8.860000] [<c02491d4>] (dev_queue_xmit+0x2a0/0x40c) from [<c024f8a4>] (neigh_resolve_output+0x104/0x2e4)
[ 8.860000] [<c024f8a4>] (neigh_resolve_output+0x104/0x2e4) from [<c02aa4f8>] (ip6_output_finish+0x90/0x100)
[ 8.860000] [<c02aa4f8>] (ip6_output_finish+0x90/0x100) from [<c02abe78>] (ip6_output+0x44c/0xd5c)
[ 8.860000] [<c02abe78>] (ip6_output+0x44c/0xd5c) from [<c02c41dc>] (mld_sendpack+0x3a0/0x3ec)
[ 8.860000] [<c02c41dc>] (mld_sendpack+0x3a0/0x3ec) from [<c02c53d8>] (mld_ifc_timer_expire+0x1c8/0x2a0)
[ 8.860000] [<c02c53d8>] (mld_ifc_timer_expire+0x1c8/0x2a0) from [<c0050c74>] (run_timer_softirq+0x118/0x200)
[ 8.860000] [<c0050c74>] (run_timer_softirq+0x118/0x200) from [<c004c13c>] (__do_softirq+0xa8/0x140)
[ 8.860000] [<c004c13c>] (__do_softirq+0xa8/0x140) from [<c004c594>] (irq_exit+0x84/0xa0)
[ 8.860000] [<c004c594>] (irq_exit+0x84/0xa0) from [<c0027290>] (do_local_timer+0x54/0x70)
[ 8.940000] [<c0027290>] (do_local_timer+0x54/0x70) from [<c0027af8>] (__irq_svc+0x38/0xc0)
[ 8.940000] Exception stack(0xc03ddf50 to 0xc03ddf98)
[ 8.940000] df40: 00000001 00000000 c03ddf98 00000000
[ 8.940000] df60: c03dc000 c04012c4 c03e203c c03dc000 c0021000 c0022180 c03e1d80 c0401040
[ 8.940000] df80: 00000000 c03ddf98 c0028a1c c0028a20 60000013 ffffffff
[ 8.980000] [<c0027af8>] (__irq_svc+0x38/0xc0) from [<c0028a20>] (default_idle+0x24/0x28)
[ 8.980000] [<c0028a20>] (default_idle+0x24/0x28) from [<c0028be8>] (cpu_idle+0x6c/0xa4)
[ 8.980000] [<c0028be8>] (cpu_idle+0x6c/0xa4) from [<c0008a10>] (start_kernel+0x31c/0x384)
[ 8.980000] [<c0008a10>] (start_kernel+0x31c/0x384) from [<60008084>] (0x60008084)
[ 8.980000] Code: e1a0c001 e59030b0 e24dd01c e1a08000 (e5933018)
[ 9.020000] Kernel panic - not syncing: Fatal exception in interrupt
[ 9.030000] [<c002cbc0>] (unwind_backtrace+0x0/0xe0) from [<c02f5b18>] (panic+0x44/0x108)
[ 9.030000] [<c02f5b18>] (panic+0x44/0x108) from [<c002b63c>] (die+0x138/0x164)
[ 9.040000] [<c002b63c>] (die+0x138/0x164) from [<c02f5a08>] (__do_kernel_fault.part.2+0x54/0x64)
[ 9.050000] [<c02f5a08>] (__do_kernel_fault.part.2+0x54/0x64) from [<c002dd38>] (do_page_fault+0x204/0x278)
[ 9.060000] [<c002dd38>] (do_page_fault+0x204/0x278) from [<c002743c>] (do_DataAbort+0x30/0x98)
[ 9.070000] [<c002743c>] (do_DataAbort+0x30/0x98) from [<c0027aac>] (__dabt_svc+0x4c/0x60)
[ 9.080000] Exception stack(0xc03ddc80 to 0xc03ddcc8)
[ 9.080000] dc80: c559d0a0 c5e1f000 00000000 00000001 c559d0a0 c5e1f000 c041c844 c041c8e0
[ 9.090000] dca0: c559d0a0 bf009854 00000000 c5e1f000 c5e1f000 c03ddcc8 c0248e88 bf0043cc
[ 9.100000] dcc0: 60000113 ffffffff
[ 9.110000] [<c0027aac>] (__dabt_svc+0x4c/0x60) from [<bf0043cc>] (copro_hard_start_xmit+0x14/0x3e4 [gmac])
[ 9.120000] [<bf0043cc>] (copro_hard_start_xmit+0x14/0x3e4 [gmac]) from [<c0248e88>] (dev_hard_start_xmit+0x244/0x2f0)
[ 9.130000] [<c0248e88>] (dev_hard_start_xmit+0x244/0x2f0) from [<c02576ec>] (__qdisc_run+0x110/0x264)
[ 9.140000] [<c02576ec>] (__qdisc_run+0x110/0x264) from [<c02491d4>] (dev_queue_xmit+0x2a0/0x40c)
[ 9.140000] [<c02491d4>] (dev_queue_xmit+0x2a0/0x40c) from [<c024f8a4>] (neigh_resolve_output+0x104/0x2e4)
[ 9.150000] [<c024f8a4>] (neigh_resolve_output+0x104/0x2e4) from [<c02aa4f8>] (ip6_output_finish+0x90/0x100)
[ 9.160000] [<c02aa4f8>] (ip6_output_finish+0x90/0x100) from [<c02abe78>] (ip6_output+0x44c/0xd5c)
[ 9.170000] [<c02abe78>] (ip6_output+0x44c/0xd5c) from [<c02c41dc>] (mld_sendpack+0x3a0/0x3ec)
[ 9.180000] [<c02c41dc>] (mld_sendpack+0x3a0/0x3ec) from [<c02c53d8>] (mld_ifc_timer_expire+0x1c8/0x2a0)
[ 9.190000] [<c02c53d8>] (mld_ifc_timer_expire+0x1c8/0x2a0) from [<c0050c74>] (run_timer_softirq+0x118/0x200)
[ 9.200000] [<c0050c74>] (run_timer_softirq+0x118/0x200) from [<c004c13c>] (__do_softirq+0xa8/0x140)
[ 9.210000] [<c004c13c>] (__do_softirq+0xa8/0x140) from [<c004c594>] (irq_exit+0x84/0xa0)
[ 9.220000] [<c004c594>] (irq_exit+0x84/0xa0) from [<c0027290>] (do_local_timer+0x54/0x70)
[ 9.230000] [<c0027290>] (do_local_timer+0x54/0x70) from [<c0027af8>] (__irq_svc+0x38/0xc0)
[ 9.230000] Exception stack(0xc03ddf50 to 0xc03ddf98)
[ 9.240000] df40: 00000001 00000000 c03ddf98 00000000
[ 9.250000] df60: c03dc000 c04012c4 c03e203c c03dc000 c0021000 c0022180 c03e1d80 c0401040
[ 9.260000] df80: 00000000 c03ddf98 c0028a1c c0028a20 60000013 ffffffff
[ 9.260000] [<c0027af8>] (__irq_svc+0x38/0xc0) from [<c0028a20>] (default_idle+0x24/0x28)
[ 9.270000] [<c0028a20>] (default_idle+0x24/0x28) from [<c0028be8>] (cpu_idle+0x6c/0xa4)
[ 9.280000] [<c0028be8>] (cpu_idle+0x6c/0xa4) from [<c0008a10>] (start_kernel+0x31c/0x384)
[ 9.290000] [<c0008a10>] (start_kernel+0x31c/0x384) from [<60008084>] (0x60008084)
[ 9.300000] CPU1: stopping
[ 9.300000] [<c002cbc0>] (unwind_backtrace+0x0/0xe0) from [<c0027398>] (do_IPI+0xec/0x160)
[ 9.310000] [<c0027398>] (do_IPI+0xec/0x160) from [<c0027af8>] (__irq_svc+0x38/0xc0)
[ 9.320000] Exception stack(0xc7843f90 to 0xc7843fd8)
[ 9.320000] 3f80: 00000001 00000000 c7843fd8 00000000
[ 9.330000] 3fa0: c7842000 c04012c4 c03e203c c7842000 00000000 410fb025 6001fd74 00000000
[ 9.340000] 3fc0: 7fffffff c7843fd8 c0028a1c c0028a20 60000013 ffffffff
[ 9.340000] [<c0027af8>] (__irq_svc+0x38/0xc0) from [<c0028a20>] (default_idle+0x24/0x28)
[ 9.350000] [<c0028a20>] (default_idle+0x24/0x28) from [<c0028be8>] (cpu_idle+0x6c/0xa4)
[ 9.360000] [<c0028be8>] (cpu_idle+0x6c/0xa4) from [<60008084>] (0x60008084)')

[belga]

Hi,

I get the same thing!

A few months ago, I managed to make it work.
The LED flashes few seconds and turn off, I have used root and not sudo.

[WarheadsSE]

looks like ipv6 may be making the gmac network driver crap.

For starters, interrupt uboot & add the below to bootargs
$this->bbcode_second_pass_code('', '
ipv6.disable=1
')