[solved] 3.10.0-1 kernel (latest) won't boot

[crashmaster]

Tried the latest kernel on 2 rpi's, but it will not boot so i switched back to the previous version. I use f2fs, maybe it has been forgotten to be compiled in ?

[moonman]

No, f2fs is included. What does it show on the screen (a readable photo is fine)? It did boot on mine when I tested it.

[crashmaster]

I use the RPi's with ssh and wlan (r8192cu) only. For testing with monitor please wait a little bit. I will do it on Monday.

[crashmaster]

I tried it now on another model B. This has ethernet and no wlan, in addition a usb memory stick is connected. It boots but an internal error occured, the stick is not usable (fdisk shows no usb device at this boot).

dmesg shows:

$this->bbcode_second_pass_code('', '
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-1-ARCH+ (nobody@) (gcc version 4.7.2 (GCC) ) #1 PREEMPT Sat Jul 13 06:31:56 CDT 2013
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] cma: CMA: reserved 16 MiB at 1dc00000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 121856
[ 0.000000] free_area_init_node: node 0, pgdat c09403a4, node_mem_map c0a20000
[ 0.000000] Normal zone: 984 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 121856 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 120872
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0xf bcm2708.serial=0x9fb6a329 smsc95xx.macaddr=B8:27:EB:B6:A3:29 sdhci-bcm2708.emmc_clock_freq=100000000 vc-cma-mem=0/0x11800000@0xd400000 mem=0xc400000@0x0 mem=0x11800000@0xd400000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=f2fs elevator=noop sdhci-bcm2708.enable_llm=0 rootwait cgroup_disable=memory raid=noautodetect
[ 0.000000] Disabling memory control group subsystem
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 196MB 280MB = 476MB total
[ 0.000000] Memory: 456380k/456380k available, 31044k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xdf000000 - 0xff000000 ( 512 MB)
lowmem : 0xc0000000 - 0xdec00000 ( 492 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc08b223c (8873 kB)
.init : 0xc08b3000 - 0xc08f160c ( 250 kB)
.data : 0xc08f2000 - 0xc094a0c0 ( 353 kB)
.bss : 0xc094a0c0 - 0xc0a1f5a0 ( 854 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.002957] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.003077] pid_max: default: 32768 minimum: 301
[ 0.003767] Security Framework initialized
[ 0.003926] AppArmor: AppArmor disabled by boot time parameter
[ 0.005206] Mount-cache hash table entries: 512
[ 0.009184] Initializing cgroup subsys memory
[ 0.009611] Initializing cgroup subsys devices
[ 0.009707] Initializing cgroup subsys freezer
[ 0.009782] Initializing cgroup subsys blkio
[ 0.009850] Initializing cgroup subsys perf_event
[ 0.010018] Initializing cgroup subsys net_prio
[ 0.010290] Initializing cgroup subsys bfqio
[ 0.010798] CPU: Testing write buffer coherency: ok
[ 0.012565] Setting up static identity map for 0xc0672698 - 0xc06726f4
[ 0.021610] devtmpfs: initialized
[ 0.096169] xor: measuring software checksum speed
[ 0.191748] arm4regs : 139.200 MB/sec
[ 0.292231] 8regs : 67.200 MB/sec
[ 0.392753] 32regs : 62.000 MB/sec
[ 0.392848] xor: using function: arm4regs (139.200 MB/sec)
[ 0.402159] NET: Registered protocol family 16
[ 0.438477] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.446093] bcm2708.uart_clock = 0
[ 0.454542] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.454634] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.454704] mailbox: Broadcom VideoCore Mailbox driver
[ 0.455051] bcm2708_vcio: mailbox at f200b880
[ 0.455468] bcm_power: Broadcom power driver
[ 0.455557] bcm_power_open() -> 0
[ 0.455621] bcm_power_request(0, 8)
[ 0.956971] bcm_mailbox_read -> 00000080, 0
[ 0.957059] bcm_power_request -> 0
[ 0.957121] Serial: AMBA PL011 UART driver
[ 0.957767] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 1.106582] bio: create slab <bio-0> at 0
[ 1.279414] raid6: int32x1 9 MB/s
[ 1.452524] raid6: int32x2 10 MB/s
[ 1.622927] raid6: int32x4 10 MB/s
[ 1.796003] raid6: int32x8 8 MB/s
[ 1.796086] raid6: using algorithm int32x2 (10 MB/s)
[ 1.796146] raid6: using intx1 recovery algorithm
[ 1.799474] SCSI subsystem initialized
[ 1.801354] usbcore: registered new interface driver usbfs
[ 1.801852] usbcore: registered new interface driver hub
[ 1.803172] usbcore: registered new device driver usb
[ 1.816903] Switching to clocksource stc
[ 1.994283] FS-Cache: Loaded
[ 1.995514] CacheFiles: Loaded
[ 2.065723] NET: Registered protocol family 2
[ 2.070873] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.071719] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.072217] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.072617] TCP: reno registered
[ 2.072748] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 2.072947] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 2.074868] NET: Registered protocol family 1
[ 2.077466] RPC: Registered named UNIX socket transport module.
[ 2.077576] RPC: Registered udp transport module.
[ 2.077644] RPC: Registered tcp transport module.
[ 2.077710] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.086499] bcm2708_dma: DMA manager at f2007000
[ 2.087471] bcm2708_gpio: bcm2708_gpio_probe c09003b0
[ 2.089887] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 2.095347] audit: initializing netlink socket (disabled)
[ 2.095710] type=2000 audit(2.070:1): initialized
[ 3.490660] VFS: Disk quotas dquot_6.5.2
[ 3.491055] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.493769] FS-Cache: Netfs 'nfs' registered for caching
[ 3.495782] NFS: Registering the id_resolver key type
[ 3.496199] Key type id_resolver registered
[ 3.496292] Key type id_legacy registered
[ 3.498326] JFS: nTxBlock = 3693, nTxLock = 29547
[ 3.509490] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.514284] bio: create slab <bio-1> at 1
[ 3.516925] Btrfs loaded
[ 3.517764] msgmni has been set to 923
[ 3.528710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.530044] io scheduler noop registered (default)
[ 3.530153] io scheduler deadline registered
[ 3.530329] io scheduler cfq registered
[ 3.530473] io scheduler bfq registered
[ 3.539181] BCM2708FB: allocated DMA memory 5e000000
[ 3.539300] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 3.676903] Console: switching to colour frame buffer device 240x67
[ 3.842419] brd: module loaded
[ 3.873430] loop: module loaded
[ 3.875055] vchiq: vchiq_init_state: slot_zero = 0xddc00000, is_master = 0
[ 3.878941] Loading iSCSI transport class v2.0-870.
[ 3.892526] usbcore: registered new interface driver ax88179_178a
[ 3.893184] usbcore: registered new interface driver smsc95xx
[ 3.894121] usbcore: registered new interface driver cdc_ncm
[ 3.894239] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 4.095765] Core Release: 2.80a
[ 4.095899] Setting default values for core params
[ 4.096080] Finished setting default values for core params
[ 4.297745] Using Buffer DMA mode
[ 4.297863] Periodic Transfer Interrupt Enhancement - disabled
[ 4.297935] Multiprocessor Interrupt Enhancement - disabled
[ 4.298008] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 4.298096] Dedicated Tx FIFOs mode
[ 4.300724] dwc_otg: Microframe scheduler enabled
[ 4.301836] dwc_otg bcm2708_usb: DWC OTG Controller
[ 4.302142] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 4.302489] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 4.302680] Init: Port Power? op_state=1
[ 4.302750] Init: Power Port (0)
[ 4.303599] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.303740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.303845] usb usb1: Product: DWC OTG Controller
[ 4.303950] usb usb1: Manufacturer: Linux 3.10.0-1-ARCH+ dwc_otg_hcd
[ 4.304045] usb usb1: SerialNumber: bcm2708_usb
[ 4.308508] hub 1-0:1.0: USB hub found
[ 4.308846] hub 1-0:1.0: 1 port detected
[ 4.310770] dwc_otg: FIQ enabled
[ 4.310863] dwc_otg: NAK holdoff enabled
[ 4.310967] Module dwc_common_port init
[ 4.313031] usbcore: registered new interface driver usb-storage
[ 4.314748] mousedev: PS/2 mouse device common for all mice
[ 4.320264] usbcore: registered new interface driver iforce
[ 4.329135] md: linear personality registered for level -1
[ 4.329247] md: raid0 personality registered for level 0
[ 4.329321] md: raid1 personality registered for level 1
[ 4.329392] md: raid10 personality registered for level 10
[ 4.329460] md: raid6 personality registered for level 6
[ 4.329527] md: raid5 personality registered for level 5
[ 4.329590] md: raid4 personality registered for level 4
[ 4.329659] md: multipath personality registered for level -4
[ 4.329727] md: faulty personality registered for level -5
[ 4.329921] device-mapper: uevent: version 1.0.3
[ 4.331433] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 4.333743] device-mapper: multipath: version 1.5.1 loaded
[ 4.333864] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.333947] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 4.334021] device-mapper: multipath service-time: version 0.2.0 loaded
[ 4.334115] device-mapper: raid: Loading target version 1.5.0
[ 4.335122] bcm2835-cpufreq: min=100000 max=850000 cur=100000
[ 4.335731] bcm2835-cpufreq: switching to governor ondemand
[ 4.335826] bcm2835-cpufreq: switching to governor ondemand
[ 4.338469] cpuidle: using governor ladder
[ 4.338492] cpuidle: using governor menu
[ 4.338606] sdhci: Secure Digital Host Controller Interface driver
[ 4.338620] sdhci: Copyright(c) Pierre Ossman
[ 4.338714] sdhci: Disable low-latency mode
[ 4.377080] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 4.377373] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 4.377464] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.377588] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.378027] usbcore: registered new interface driver usbhid
[ 4.378043] usbhid: USB HID core driver
[ 4.378546] TCP: cubic registered
[ 4.378566] Initializing XFRM netlink socket
[ 4.378607] NET: Registered protocol family 17
[ 4.378798] Key type dns_resolver registered
[ 4.379389] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 4.382455] registered taskstats version 1
[ 4.390851] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 4.393295] Waiting for root device /dev/mmcblk0p2...
[ 4.426575] mmc0: new high speed SDHC card at address 0002
[ 4.427305] mmcblk0: mmc0:0002 00000 3.70 GiB
[ 4.429129] mmcblk0: p1 p2
[ 4.507254] Indeed it is in host mode hprt0 = 00021501
[ 4.687212] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 4.687399] Indeed it is in host mode hprt0 = 00001101
[ 4.887450] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 4.887477] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.888416] hub 1-1:1.0: USB hub found
[ 4.888565] hub 1-1:1.0: 3 ports detected
[ 5.167228] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 5.267913] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 5.268003] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.271122] smsc95xx v1.0.4
[ 5.332981] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b6:a3:29
[ 5.333142] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
[ 5.333325] pgd = c0004000
[ 5.333420] [0000000c] *pgd=00000000
[ 5.333528] Internal error: Oops: 5 [#1] PREEMPT ARM
[ 5.333629] Modules linked in:
[ 5.333716] CPU: 0 PID: 14 Comm: khubd Not tainted 3.10.0-1-ARCH+ #1
[ 5.333836] task: dd4a2100 ti: dd4c6000 task.ti: dd4c6000
[ 5.333965] PC is at klist_put+0x18/0xa4
[ 5.334057] LR is at klist_iter_exit+0x1c/0x28
[ 5.334149] pc : [<c0662304>] lr : [<c06623ac>] psr: a0000113
sp : dd4c7d18 ip : c0931248 fp : dcc21250
[ 5.334323] r10: 00000000 r9 : c09fb1a0 r8 : c08fa008
[ 5.334413] r7 : dcc08068 r6 : 00000000 r5 : dd7db8d4 r4 : dd4c7d30
[ 5.334520] r3 : 00000000 r2 : dd4c7d10 r1 : 00000000 r0 : 00000001
[ 5.334626] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 5.334744] Control: 00c5387d Table: 00004008 DAC: 00000017
[ 5.334842] Process khubd (pid: 14, stack limit = 0xdd4c61b0)
[ 5.334940] Stack: (0xdd4c7d18 to 0xdd4c8000)
[ 5.335025] 7d00: dd4c7d30 dcc21020
[ 5.335159] 7d20: c047a9e0 c06623ac 00000001 c0478eec dd4884dc dd7db8d4 dcc21020 dcc21054
[ 5.335294] 7d40: c09313e0 c047a72c dcc21020 dcc21020 c09313e0 c0479db8 dcc21020 00000000
[ 5.335427] 7d60: dcc21028 c04785b0 00000000 c09313a8 00000008 c092f05c dcc8dd08 00000000
[ 5.335558] 7d80: dcc08000 5c6c8064 00000022 dcc21000 00000000 dcc21000 00000000 dcc08068
[ 5.335689] 7da0: dcc7e2a8 00000001 dcc21250 c04cf934 00000001 00000000 00000000 00000000
[ 5.335823] 7dc0: 00001388 dd4c7df8 dd4c7df8 dcc08068 dcc22f20 dcc21200 00000001 00000001
[ 5.335956] 7de0: dcc08004 dcc22f20 00000001 dd7deca0 dcc08000 dcc08000 00000001 c047a9e0
[ 5.336089] 7e00: c093198c c08fa008 c09fb1a0 00000000 dcc21400 c04d7b70 c04d7b3c c09fb1c8
[ 5.336221] 7e20: dcc08068 c04cfe98 c04cfe80 c047a7c4 c047a9e0 00000000 dcc08068 c047a9e0
[ 5.336355] 7e40: dcc08468 c0478eb8 dd4884dc dd482394 dcc08068 dcc0809c c09313e0 c047a72c
[ 5.336487] 7e60: dcc08068 dcc08068 c09313e0 c0479db8 dcc08068 00000000 dcc08070 c04785b0
[ 5.336619] 7e80: 00000000 c09312a0 c08180e0 393831b4 dc00323a dd4c7eb0 dcc08000 5c6c8064
[ 5.336753] 7ea0: dcc08068 dcc08000 dcc08400 dcc08068 00000001 00000001 00000003 dcc08000
[ 5.336886] 7ec0: dcc21400 c04c79ec 00000000 00000001 dcc08400 00000000 00000000 00000003
[ 5.337019] 7ee0: 00000001 c04c8e58 6b73e770 00000000 00000101 c0044bd0 00000002 dcc21408
[ 5.337152] 7f00: dcc21400 dcc08400 dcc0849c dcc21620 dd4c6000 00000000 dd7deca0 dcc2142c
[ 5.337286] 7f20: dcc21620 00000064 3f3f3f3f 00000101 3f3f3f3f 00000000 dd4a2100 c0045680
[ 5.337417] 7f40: dd4c7f40 dd4c7f40 c04c83c8 dd43bedc 00000000 00000000 c04c83c8 00000000
[ 5.337550] 7f60: 00000000 00000000 00000000 c0044bf4 3f3f3f3f 00000000 3f3f3f3f 00000000
[ 5.337683] 7f80: 00000000 dd4c7f84 dd4c7f84 00000000 dd4c7f90 dd4c7f90 dd4c7fac dd43bedc
[ 5.337816] 7fa0: c0044b50 00000000 00000000 c000dc18 00000000 00000000 00000000 00000000
[ 5.337946] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.338078] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 3f3f3f3f 3f3f3f3f
[ 5.338246] [<c0662304>] (klist_put+0x18/0xa4) from [<c06623ac>] (klist_iter_exit+0x1c/0x28)
[ 5.338401] [<c06623ac>] (klist_iter_exit+0x1c/0x28) from [<c0478eec>] (bus_for_each_drv+0x78/0x8c)
[ 5.338565] [<c0478eec>] (bus_for_each_drv+0x78/0x8c) from [<c047a72c>] (device_attach+0x74/0x80)
[ 5.338719] [<c047a72c>] (device_attach+0x74/0x80) from [<c0479db8>] (bus_probe_device+0x84/0xa8)
[ 5.338889] [<c0479db8>] (bus_probe_device+0x84/0xa8) from [<c04785b0>] (device_add+0x518/0x5f0)
[ 5.339049] [<c04785b0>] (device_add+0x518/0x5f0) from [<c04cf934>] (usb_set_configuration+0x534/0x9dc)
[ 5.339219] [<c04cf934>] (usb_set_configuration+0x534/0x9dc) from [<c04d7b70>] (generic_probe+0x34/0x80)
[ 5.339382] [<c04d7b70>] (generic_probe+0x34/0x80) from [<c04cfe98>] (usb_probe_device+0x18/0x1c)
[ 5.339538] [<c04cfe98>] (usb_probe_device+0x18/0x1c) from [<c047a7c4>] (driver_probe_device+0x6c/0x1f8)
[ 5.339699] [<c047a7c4>] (driver_probe_device+0x6c/0x1f8) from [<c0478eb8>] (bus_for_each_drv+0x44/0x8c)
[ 5.339860] [<c0478eb8>] (bus_for_each_drv+0x44/0x8c) from [<c047a72c>] (device_attach+0x74/0x80)
[ 5.340001] [<c047a72c>] (device_attach+0x74/0x80) from [<c0479db8>] (bus_probe_device+0x84/0xa8)
[ 5.340146] [<c0479db8>] (bus_probe_device+0x84/0xa8) from [<c04785b0>] (device_add+0x518/0x5f0)
[ 5.340302] [<c04785b0>] (device_add+0x518/0x5f0) from [<c04c79ec>] (usb_new_device+0x190/0x288)
[ 5.340448] [<c04c79ec>] (usb_new_device+0x190/0x288) from [<c04c8e58>] (hub_thread+0xa90/0x1164)
[ 5.340614] [<c04c8e58>] (hub_thread+0xa90/0x1164) from [<c0044bf4>] (kthread+0xa4/0xb0)
[ 5.340770] [<c0044bf4>] (kthread+0xa4/0xb0) from [<c000dc18>] (ret_from_fork+0x14/0x3c)
[ 5.340908] Code: e3a00001 e5953000 e1a06001 e3c33001 (e593400c)
[ 5.341498] ---[ end trace e1525fea4ca82205 ]---
[ 6.255636] VFS: Mounted root (f2fs filesystem) on device 179:2.
[ 6.266566] devtmpfs: mounted
[ 6.272495] Freeing unused kernel memory: 248K (c08b3000 - c08f1000)
[ 6.682062] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 6.769842] systemd[1]: Module 'ipv6' is blacklisted
[ 6.779211] systemd[1]: Set hostname to <itx1>.
[ 7.322275] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.328424] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.333891] systemd[1]: Starting Remote File Systems.
[ 7.345267] systemd[1]: Reached target Remote File Systems.
[ 7.350676] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 7.361935] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.373557] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.379043] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.390710] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.396126] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.407813] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.413487] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.425917] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.432241] systemd[1]: Starting udev Kernel Socket.
[ 7.444074] systemd[1]: Listening on udev Kernel Socket.
[ 7.450133] systemd[1]: Starting udev Control Socket.
[ 7.461962] systemd[1]: Listening on udev Control Socket.
[ 7.467484] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.473257] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.478747] systemd[1]: Starting Paths.
[ 7.489990] systemd[1]: Reached target Paths.
[ 7.495232] systemd[1]: Starting Encrypted Volumes.
[ 7.506389] systemd[1]: Reached target Encrypted Volumes.
[ 7.511774] systemd[1]: Starting Journal Socket.
[ 7.523559] systemd[1]: Listening on Journal Socket.
[ 7.528997] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.544279] systemd[1]: Starting Create static device nodes in /dev...
[ 7.573512] systemd[1]: Mounting Debug File System...
[ 7.617452] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.644020] systemd[1]: Starting Load Kernel Modules...
[ 7.670969] systemd[1]: Mounted Huge Pages File System.
[ 7.676756] systemd[1]: Starting udev Coldplug all Devices...
[ 7.776703] systemd[1]: Starting Apply Kernel Variables...
[ 7.799817] systemd[1]: Starting Journal Service...
[ 7.860562] i2c /dev entries driver
[ 7.882212] systemd[1]: Started Journal Service.
[ 7.895333] systemd[1]: Starting Setup Virtual Console...
[ 7.922636] systemd[1]: Starting Swap.
[ 7.942776] systemd[1]: Reached target Swap.
[ 7.952582] systemd[1]: Mounting Temporary Directory...
[ 7.980483] bcm2708_i2c_init_pinmode(0,0)
[ 7.993538] systemd[1]: Started File System Check on Root Device.
[ 8.007423] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.044938] bcm2708_i2c_init_pinmode(0,1)
[ 8.065481] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.117495] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k)
[ 8.117619] bcm2708_i2c_init_pinmode(1,2)
[ 8.117626] bcm2708_i2c_init_pinmode(1,3)
[ 8.118109] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
[ 8.177401] systemd[1]: Started Create static device nodes in /dev.
[ 8.198692] systemd[1]: Mounted Debug File System.
[ 8.225440] systemd[1]: Started Apply Kernel Variables.
[ 8.241745] systemd[1]: Mounted Temporary Directory.
[ 8.277252] systemd[1]: Starting udev Kernel Device Manager...
[ 9.686901] systemd-udevd[77]: starting version 204
[ 9.873398] Driver for 1-wire Dallas network protocol.
[ 10.084169] w1_master_driver w1_bus_master1: Family 28 for 28.00000452e0cb.e2 is not registered.
[ 10.127276] bcm2708 watchdog, heartbeat=10 sec (nowayout=1)
[ 11.441578] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[ 11.498450] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[ 12.742272] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 14.416370] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
')

"lsusb" shows:
$this->bbcode_second_pass_code('', '
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. LAN9500 Ethernet 10/100 Adapter / SMSC9512/9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
')

Missing the usb stick.

-------------------------------------------------------------------------------------------------------------------------
EDIT:
I disconnected the HDMI plug and it doesn't boot (like my other RPi's).

Connecting HDMI again it boots like written above BUT my usb storage stick is usable now.
Maybe it helps to take a look in this dmesg for differences:
$this->bbcode_second_pass_code('', '
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0-1-ARCH+ (nobody@) (gcc version 4.7.2 (GCC) ) #1 PREEMPT Sat Jul 13 06:31:56 CDT 2013
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] cma: CMA: reserved 16 MiB at 1dc00000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 121856
[ 0.000000] free_area_init_node: node 0, pgdat c09403a4, node_mem_map c0a20000
[ 0.000000] Normal zone: 984 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 121856 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 120872
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0xf bcm2708.serial=0x9fb6a329 smsc95xx.macaddr=B8:27:EB:B6:A3:29 sdhci-bcm2708.emmc_clock_freq=100000000 vc-cma-mem=0/0x11800000@0xd400000 mem=0xc400000@0x0 mem=0x11800000@0xd400000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=f2fs elevator=noop sdhci-bcm2708.enable_llm=0 rootwait cgroup_disable=memory raid=noautodetect
[ 0.000000] Disabling memory control group subsystem
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 196MB 280MB = 476MB total
[ 0.000000] Memory: 456380k/456380k available, 31044k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xdf000000 - 0xff000000 ( 512 MB)
lowmem : 0xc0000000 - 0xdec00000 ( 492 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc08b223c (8873 kB)
.init : 0xc08b3000 - 0xc08f160c ( 250 kB)
.data : 0xc08f2000 - 0xc094a0c0 ( 353 kB)
.bss : 0xc094a0c0 - 0xc0a1f5a0 ( 854 kB)
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.002950] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.003064] pid_max: default: 32768 minimum: 301
[ 0.003756] Security Framework initialized
[ 0.003913] AppArmor: AppArmor disabled by boot time parameter
[ 0.005202] Mount-cache hash table entries: 512
[ 0.009178] Initializing cgroup subsys memory
[ 0.009597] Initializing cgroup subsys devices
[ 0.009693] Initializing cgroup subsys freezer
[ 0.009766] Initializing cgroup subsys blkio
[ 0.009831] Initializing cgroup subsys perf_event
[ 0.009998] Initializing cgroup subsys net_prio
[ 0.010270] Initializing cgroup subsys bfqio
[ 0.010778] CPU: Testing write buffer coherency: ok
[ 0.012539] Setting up static identity map for 0xc0672698 - 0xc06726f4
[ 0.021570] devtmpfs: initialized
[ 0.096001] xor: measuring software checksum speed
[ 0.191710] arm4regs : 138.800 MB/sec
[ 0.292210] 8regs : 67.200 MB/sec
[ 0.392728] 32regs : 62.000 MB/sec
[ 0.392821] xor: using function: arm4regs (138.800 MB/sec)
[ 0.402123] NET: Registered protocol family 16
[ 0.438409] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.445993] bcm2708.uart_clock = 0
[ 0.454453] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.454548] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.454621] mailbox: Broadcom VideoCore Mailbox driver
[ 0.454967] bcm2708_vcio: mailbox at f200b880
[ 0.455381] bcm_power: Broadcom power driver
[ 0.455472] bcm_power_open() -> 0
[ 0.455537] bcm_power_request(0, 8)
[ 0.956872] bcm_mailbox_read -> 00000080, 0
[ 0.956953] bcm_power_request -> 0
[ 0.957015] Serial: AMBA PL011 UART driver
[ 0.957656] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 1.106412] bio: create slab <bio-0> at 0
[ 1.279302] raid6: int32x1 9 MB/s
[ 1.452093] raid6: int32x2 10 MB/s
[ 1.622562] raid6: int32x4 10 MB/s
[ 1.795832] raid6: int32x8 8 MB/s
[ 1.795918] raid6: using algorithm int32x2 (10 MB/s)
[ 1.795980] raid6: using intx1 recovery algorithm
[ 1.799283] SCSI subsystem initialized
[ 1.801158] usbcore: registered new interface driver usbfs
[ 1.801642] usbcore: registered new interface driver hub
[ 1.802960] usbcore: registered new device driver usb
[ 1.816655] Switching to clocksource stc
[ 1.993872] FS-Cache: Loaded
[ 1.995109] CacheFiles: Loaded
[ 2.065202] NET: Registered protocol family 2
[ 2.070359] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.071204] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.071703] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.072098] TCP: reno registered
[ 2.072227] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 2.072422] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 2.074330] NET: Registered protocol family 1
[ 2.076691] RPC: Registered named UNIX socket transport module.
[ 2.077035] RPC: Registered udp transport module.
[ 2.077123] RPC: Registered tcp transport module.
[ 2.077191] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.085985] bcm2708_dma: DMA manager at f2007000
[ 2.086610] bcm2708_gpio: bcm2708_gpio_probe c09003b0
[ 2.089363] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 2.094816] audit: initializing netlink socket (disabled)
[ 2.095155] type=2000 audit(2.070:1): initialized
[ 3.489946] VFS: Disk quotas dquot_6.5.2
[ 3.490343] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.493063] FS-Cache: Netfs 'nfs' registered for caching
[ 3.495073] NFS: Registering the id_resolver key type
[ 3.495487] Key type id_resolver registered
[ 3.495582] Key type id_legacy registered
[ 3.497601] JFS: nTxBlock = 3693, nTxLock = 29547
[ 3.508765] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.513558] bio: create slab <bio-1> at 1
[ 3.516193] Btrfs loaded
[ 3.516776] msgmni has been set to 923
[ 3.527974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.529353] io scheduler noop registered (default)
[ 3.529461] io scheduler deadline registered
[ 3.529634] io scheduler cfq registered
[ 3.529776] io scheduler bfq registered
[ 3.538442] BCM2708FB: allocated DMA memory 5e000000
[ 3.538559] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 3.691858] Console: switching to colour frame buffer device 240x67
[ 3.857353] brd: module loaded
[ 3.888291] loop: module loaded
[ 3.889946] vchiq: vchiq_init_state: slot_zero = 0xddc00000, is_master = 0
[ 3.893512] Loading iSCSI transport class v2.0-870.
[ 3.907432] usbcore: registered new interface driver ax88179_178a
[ 3.908160] usbcore: registered new interface driver smsc95xx
[ 3.909059] usbcore: registered new interface driver cdc_ncm
[ 3.909179] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 4.110786] Core Release: 2.80a
[ 4.110920] Setting default values for core params
[ 4.111098] Finished setting default values for core params
[ 4.312517] Using Buffer DMA mode
[ 4.312636] Periodic Transfer Interrupt Enhancement - disabled
[ 4.312700] Multiprocessor Interrupt Enhancement - disabled
[ 4.312773] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 4.312858] Dedicated Tx FIFOs mode
[ 4.315492] dwc_otg: Microframe scheduler enabled
[ 4.316611] dwc_otg bcm2708_usb: DWC OTG Controller
[ 4.317176] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 4.317536] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 4.317730] Init: Port Power? op_state=1
[ 4.317797] Init: Power Port (0)
[ 4.318648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.318787] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.318896] usb usb1: Product: DWC OTG Controller
[ 4.319002] usb usb1: Manufacturer: Linux 3.10.0-1-ARCH+ dwc_otg_hcd
[ 4.319101] usb usb1: SerialNumber: bcm2708_usb
[ 4.323244] hub 1-0:1.0: USB hub found
[ 4.323570] hub 1-0:1.0: 1 port detected
[ 4.325172] ------------[ cut here ]------------
[ 4.325421] WARNING: at lib/klist.c:189 klist_release+0xd4/0xf0()
[ 4.325494] Modules linked in:
[ 4.325627] CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-1-ARCH+ #1
[ 4.325924] [<c0013dc8>] (unwind_backtrace+0x0/0xf0) from [<c0011140>] (show_stack+0x10/0x14)
[ 4.326150] [<c0011140>] (show_stack+0x10/0x14) from [<c00231bc>] (warn_slowpath_common+0x4c/0x68)
[ 4.326330] [<c00231bc>] (warn_slowpath_common+0x4c/0x68) from [<c00231f4>] (warn_slowpath_null+0x1c/0x24)
[ 4.326522] [<c00231f4>] (warn_slowpath_null+0x1c/0x24) from [<c0662158>] (klist_release+0xd4/0xf0)
[ 4.326706] [<c0662158>] (klist_release+0xd4/0xf0) from [<c06621a8>] (klist_dec_and_del+0x34/0x3c)
[ 4.327193] [<c06621a8>] (klist_dec_and_del+0x34/0x3c) from [<c06621dc>] (klist_next+0x2c/0x13c)
[ 4.327408] [<c06621dc>] (klist_next+0x2c/0x13c) from [<c0478e38>] (next_device+0x8/0x14)
[ 4.327569] [<c0478e38>] (next_device+0x8/0x14) from [<c0478f60>] (bus_for_each_dev+0x60/0x88)
[ 4.327733] [<c0478f60>] (bus_for_each_dev+0x60/0x88) from [<c0479f98>] (bus_add_driver+0xd8/0x234)
[ 4.327888] [<c0479f98>] (bus_add_driver+0xd8/0x234) from [<c047aeb8>] (driver_register+0x78/0x14c)
[ 4.328078] [<c047aeb8>] (driver_register+0x78/0x14c) from [<c08dfb0c>] (dwc_otg_driver_init+0x20/0xc4)
[ 4.328244] [<c08dfb0c>] (dwc_otg_driver_init+0x20/0xc4) from [<c000856c>] (do_one_initcall+0xec/0x150)
[ 4.328457] [<c000856c>] (do_one_initcall+0xec/0x150) from [<c08b3950>] (kernel_init_freeable+0x138/0x204)
[ 4.328661] [<c08b3950>] (kernel_init_freeable+0x138/0x204) from [<c06626d8>] (kernel_init+0x8/0xe4)
[ 4.328848] [<c06626d8>] (kernel_init+0x8/0xe4) from [<c000dc18>] (ret_from_fork+0x14/0x3c)
[ 4.329149] ---[ end trace 438e33cbf82f45e0 ]---
[ 4.329605] dwc_otg: FIQ enabled
[ 4.329682] dwc_otg: NAK holdoff enabled
[ 4.329788] Module dwc_common_port init
[ 4.331961] usbcore: registered new interface driver usb-storage
[ 4.333679] mousedev: PS/2 mouse device common for all mice
[ 4.339420] usbcore: registered new interface driver iforce
[ 4.348328] md: linear personality registered for level -1
[ 4.348444] md: raid0 personality registered for level 0
[ 4.348518] md: raid1 personality registered for level 1
[ 4.348589] md: raid10 personality registered for level 10
[ 4.348662] md: raid6 personality registered for level 6
[ 4.348727] md: raid5 personality registered for level 5
[ 4.348791] md: raid4 personality registered for level 4
[ 4.348857] md: multipath personality registered for level -4
[ 4.348924] md: faulty personality registered for level -5
[ 4.349115] device-mapper: uevent: version 1.0.3
[ 4.350620] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 4.352935] device-mapper: multipath: version 1.5.1 loaded
[ 4.353063] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.353142] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 4.353211] device-mapper: multipath service-time: version 0.2.0 loaded
[ 4.353308] device-mapper: raid: Loading target version 1.5.0
[ 4.354306] bcm2835-cpufreq: min=100000 max=850000 cur=100000
[ 4.354909] bcm2835-cpufreq: switching to governor ondemand
[ 4.355005] bcm2835-cpufreq: switching to governor ondemand
[ 4.357693] cpuidle: using governor ladder
[ 4.357715] cpuidle: using governor menu
[ 4.357818] sdhci: Secure Digital Host Controller Interface driver
[ 4.357832] sdhci: Copyright(c) Pierre Ossman
[ 4.357921] sdhci: Disable low-latency mode
[ 4.396828] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 4.397103] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 4.397188] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.397304] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.397718] usbcore: registered new interface driver usbhid
[ 4.397733] usbhid: USB HID core driver
[ 4.398214] TCP: cubic registered
[ 4.398233] Initializing XFRM netlink socket
[ 4.398272] NET: Registered protocol family 17
[ 4.398475] Key type dns_resolver registered
[ 4.399051] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 4.402041] registered taskstats version 1
[ 4.410322] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 4.412737] Waiting for root device /dev/mmcblk0p2...
[ 4.446306] mmc0: new high speed SDHC card at address 0002
[ 4.446991] mmcblk0: mmc0:0002 00000 3.70 GiB
[ 4.448750] mmcblk0: p1 p2
[ 4.517345] Indeed it is in host mode hprt0 = 00021501
[ 4.696898] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 4.697081] Indeed it is in host mode hprt0 = 00001101
[ 4.897200] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 4.897228] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.898045] hub 1-1:1.0: USB hub found
[ 4.898188] hub 1-1:1.0: 3 ports detected
[ 5.177102] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 5.277578] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 5.277606] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.280671] smsc95xx v1.0.4
[ 5.343103] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b6:a3:29
[ 5.437003] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[ 5.538543] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5571
[ 5.538569] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.538583] usb 1-1.3: Product: Cruzer Fit
[ 5.538596] usb 1-1.3: Manufacturer: SanDisk
[ 5.538609] usb 1-1.3: SerialNumber: 4C532000040906111504
[ 5.539631] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 5.540552] scsi0 : usb-storage 1-1.3:1.0
[ 6.538443] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Fit 1.26 PQ: 0 ANSI: 5
[ 6.541201] sd 0:0:0:0: [sda] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 6.542564] sd 0:0:0:0: [sda] Write Protect is off
[ 6.542596] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 6.543570] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.555738] sda: sda1
[ 6.560095] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 12.011409] VFS: Mounted root (f2fs filesystem) on device 179:2.
[ 12.018712] devtmpfs: mounted
[ 12.019485] Freeing unused kernel memory: 248K (c08b3000 - c08f1000)
[ 12.428878] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 12.493388] systemd[1]: Module 'ipv6' is blacklisted
[ 12.497385] systemd[1]: Set hostname to <itx1>.
[ 13.013706] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 13.014422] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.014636] systemd[1]: Starting Remote File Systems.
[ 13.015410] systemd[1]: Reached target Remote File Systems.
[ 13.015582] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 13.016262] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 13.017316] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.017488] systemd[1]: Starting Delayed Shutdown Socket.
[ 13.018490] systemd[1]: Listening on Delayed Shutdown Socket.
[ 13.018658] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 13.019634] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 13.020107] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 13.021657] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.022425] systemd[1]: Starting udev Kernel Socket.
[ 13.023368] systemd[1]: Listening on udev Kernel Socket.
[ 13.024070] systemd[1]: Starting udev Control Socket.
[ 13.025088] systemd[1]: Listening on udev Control Socket.
[ 13.025330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 13.025852] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.026004] systemd[1]: Starting Paths.
[ 13.026685] systemd[1]: Reached target Paths.
[ 13.026955] systemd[1]: Starting Encrypted Volumes.
[ 13.027640] systemd[1]: Reached target Encrypted Volumes.
[ 13.027843] systemd[1]: Starting Journal Socket.
[ 13.029067] systemd[1]: Listening on Journal Socket.
[ 13.029367] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.033975] systemd[1]: Starting Create static device nodes in /dev...
[ 13.049480] systemd[1]: Mounting Debug File System...
[ 13.068901] systemd[1]: Started Set Up Additional Binary Formats.
[ 13.092423] systemd[1]: Starting Load Kernel Modules...
[ 13.097706] systemd[1]: Mounted Huge Pages File System.
[ 13.098363] systemd[1]: Starting udev Coldplug all Devices...
[ 13.146096] systemd[1]: Starting Apply Kernel Variables...
[ 13.150843] systemd[1]: Starting Journal Service...
[ 13.166230] systemd[1]: Started Journal Service.
[ 13.166626] systemd[1]: Starting Setup Virtual Console...
[ 13.176165] systemd[1]: Starting Swap.
[ 13.180272] systemd[1]: Reached target Swap.
[ 13.180520] systemd[1]: Mounting Temporary Directory...
[ 13.190103] systemd[1]: Started File System Check on Root Device.
[ 13.190374] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.393308] i2c /dev entries driver
[ 13.460435] bcm2708_i2c_init_pinmode(0,0)
[ 13.460462] bcm2708_i2c_init_pinmode(0,1)
[ 13.470125] systemd-udevd[72]: starting version 204
[ 13.505711] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k)
[ 13.511939] bcm2708_i2c_init_pinmode(1,2)
[ 13.511967] bcm2708_i2c_init_pinmode(1,3)
[ 13.514611] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
[ 15.372782] Driver for 1-wire Dallas network protocol.
[ 15.435291] w1_master_driver w1_bus_master1: Family 28 for 28.00000452e0cb.e2 is not registered.
[ 15.472851] bcm2708 watchdog, heartbeat=10 sec (nowayout=1)
[ 16.517858] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[ 16.517893] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[ 17.851090] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 19.444990] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
')

[moonman]

Hmm I haven't seen these errors on my system, but there's definitely something fishy about 3.10 as for me some things don't work randomly as well, even though it does boot up. I'll try to reconfigure the kernel starting with the recommended defaults.

Could also be related to this: https://github.com/raspberrypi/linux/co ... 6147d4736e

[Janhouse]

I also can't boot my raspberry pi after upgrading kernel to 3.10.

[moonman]

I'm working on it. First I'll just see if the problem is fixed in the current source (Mine boots ok, so I guess you guys will have to tell me if boots or doesn't). Then if that doesn't work, I will need to reconfigure the whole thing.

[crashmaster]

Ok, so we'll wait for a 3.10.0-2 in the repo, thanks moonman.

[moonman]

3.10.1 will be in the repo soon. Again, mine boots fine.

[moonman]

3.10.1 is in the repo now.