by MrGreen » Thu Sep 12, 2013 2:47 pm
Still not having any luck
$this->bbcode_second_pass_code('', '[archpi@alarmpi ~]$ lsmod
Module Size Used by
nfsd 229251 13
arc4 1708 2
rt2800usb 14984 0
rt2800lib 55575 1 rt2800usb
rt2x00usb 11228 1 rt2800usb
rt2x00lib 42538 3 rt2x00usb,rt2800lib,rt2800usb
spidev 5240 0
mac80211 438030 3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211 189657 2 mac80211,rt2x00lib
crc_ccitt 1554 1 rt2800lib
leds_gpio 2283 0
led_class 3594 2 leds_gpio,rt2x00lib
spi_bcm2708 4852 0
i2c_bcm2708 3931 0
snd_bcm2835 16369 0
snd_pcm 77460 1 snd_bcm2835
snd_page_alloc 5185 1 snd_pcm
snd_timer 19798 1 snd_pcm
snd 58423 3 snd_bcm2835,snd_timer,snd_pcm
bcm2708_rng 1029 0
rng_core 3864 1 bcm2708_rng
ipv6 297976 0
')
output from running hostapd
$this->bbcode_second_pass_code('', 'Configuration file: /home/archpi/hostapd-test.conf
nl80211: Failed to set interface wlan0 into AP mode
nl80211 driver initialization failed.
')
File
$this->bbcode_second_pass_code('', 'interface=wlan0
ssid=MyAP
hw_mode=g
channel=1
')
Seems many users have the same problem I am out of ideas