Guide for using the serial port on the Pogoplug v2

Guides written by the community, for the community, and only guides!

Guide for using the serial port on the Pogoplug v2

Postby oneguynick » Tue Dec 17, 2013 5:51 am

I did a short write-up on opening the Pogoplug v2 and using the serial port to enable SSH/Telnet since the support with Pogo is HORRIBLE

http://geekyschmidt.com/2013/12/17/serial-port-on-the-pogoplug-v2
oneguynick
 
Posts: 1
Joined: Tue Dec 17, 2013 5:48 am

Re: Guide for using the serial port on the Pogoplug v2

Postby WarheadsSE » Tue Dec 17, 2013 2:49 pm

Well they aren't going to tell you how to do it after all :P

This however should have existed out on the net for a while. A fresh copy to confirm all is still good never hurts though :)
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 6730
Joined: Mon Oct 18, 2010 2:12 pm

Re: Guide for using the serial port on the Pogoplug v2

Postby grayman4hire » Tue Dec 17, 2013 5:25 pm

Here is my tutorial. It uses a CD-ROM Audio Cable (Sound Blaster/MPC-2) to keep things simple.

Pogoplug V2 and V3 Serial Connection
http://blog.qnology.com/2013/10/pogoplu ... ction.html

BTW, you don't need to enable SSH via the my.pogoplug.com service. SSH is enabled by default. It is only disabled after you activate the Pogoplug.
grayman4hire
 
Posts: 350
Joined: Sat Sep 29, 2012 12:03 am
Location: SF, CA


Return to Community Guides

Who is online

Users browsing this forum: No registered users and 1 guest