Got ALARM runing on Amlogic-M6/MX, well...sort of.

[dhead666]

I added to the "ARMv7 Multi-platform" rootfs my kernel and got Arch to run on my Amlogic-M6/MX (meson6) device but not without errors.
EDIT: I forgot to enable FHANDLE

ATM I don't got terminal access via HDMI, no login via serial and no ssh.

The funny thing is that both my MX and M3 devices looking the same and for a half hour I tried to figure out why the MX kernel won't load on my M3 device.

Anyway here's how it look via serial.

$this->bbcode_second_pass_code('', '
Welcome to Arch Linux ARM!

[ 18.037865@0] systemd[1]: Failed to insert module 'ipv6'
[ 18.039160@0] systemd[1]: Set hostname to <alarm>.
[ 18.366300@1] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.377 Expecting device dev-ttyS0.device...
[ 1 Expecting device dev-hvc0.device...
[ 18.421388@1] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
J OK ] Reached target Remote File Systems. Password Requests to Wall Directory Watch.
[ 18.451360@1] systemd[1]: Reached target Remote File Systems.
[ 18.451509@1] systemd[1] Expecting device sys-subsystem-net-devices-eth0.device...
[ 18.481410@1] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 18.484124@1] systemd[1]: Started Dispatch Password Requests to Console DirU��&�
z-� ] Reached target Paths.
[ 18.511360@1] systemd[1]: Reached target Paths.
[ 18.511513@1] systemd[1]: Starting Arbitra[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 18.541368@1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Poin�[ OK ] Reached target Encrypted Volumes.
[ 18.56405@0] systemd[1]: Reached target Encr[ OK ] Reached target Swap.
[ 18.581369@0] systemd[1]: Reached target Swap.
[ 18.581459@0] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 22.691372@1] systemd[1]: Created slice Root Slice.
[ 22.[ OK ] Created slice User and Session Slice.
[ 22.711372@1] systemd[1]: Created slice User and Session Slice.
[ 22.711706B OK ] Listening on Device-mapper event daemon FIFOs.
[ 22.731404@0] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 22.732526@0] s[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 22.761394@0] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ r OK ] Listening on Delayed Shutdown Socket.
[ 22.781380@0] systemd[1]: Listening on Delayed Shutdown Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket. udev Control Socket.
[ 22.821411@0] systemd[1]: Listening on udev Kernel Socket.
[ 22.8[ OK ] Listening on LVM2 metadata daemon socket.
[ 22.841369@0] systemd[1]: Listening on LVM2 metadata daemon socke[ OK ] Listening on Journal Socket.
[ 22.861384@0] systemd[1]: Listening on Journal Socket.[ OK ] Created slice System Slice.
[ 22.881404@0] systemd[1]: Created slice System Slice.
[ 22.881530@0]! OK ] Created slice system-netctl\x2difpugd.slice.
[ 22.901398@1] systemd[1]: Created slice system-netctl\x2difplugd.slice.
[ [ OK ] Created slice system-getty.sice.
[ 22.921369@1] systemd[1]: Created slice system-getty.slice.
[ 22.921460@[ OK ] Created slice system-serial\x2dgetty.slice.
[ 22.94140d[1]: Created slice system-serial\x2dgetty.slice.
[ 2: Starting Apply Kernel Variables...
[ 23.011925@0] systemd[1]: Mounted Huge Pages File System.
[ 23.014438@0] systemd[1]: Started Load Kernel Modules.
[ 23.016920@0] systemd[1]: Mounted Configuration File System.
[ 23.022659@0] systemd[1]: Mounted POSIX Message Queue File System.
[ 23.02 Mounting FUSE Control File System...
[ 23.143602@1] systemd[1]: Started Set UpAdditional Binary Formats.
[ 23.14 Starting udev Coldplug all Devices...
[ 23.312766@1] systemd[1]: Starting Create list Starting Create list of requred static device nodes...rrent kernel...
[ 2� Starting Setup Virtual Console...
[ 23 Mounting Debug File System...
[ 23 Starting Journal Service...
[ OK ] Started Journal Service.
[ 23.9t[ OK ] Reached target Slices.
Starting Remount Root and Kernel File Systems...
Mounting Temporary Directory...
[ 24.108226@1] systemd-journald[1706]: Failed to register hostname fd in event loop: Operation not permitted. Ignoring.
[ OK ] Mounted Debug File System.
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Aply Kernel Variables.
[ OK ] Started Create list of required static device nodes ...current kernel.
[ OK ] Started Setup Virt.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Mounted Temporary Directory.
Starting Load/Save Random Seed...
Starting Create Static Device Nodes in /dev...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
Starting Trigger Flushing of Journal to Persistent Storage...
[ systemd-udevd[2518]: starting version 212
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP aout System Boot/Shutdown...
[ 26.226616@0] systemd-journald[1706]: Received request to flush runtime journal from PID 1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ 26.455212@0] systemd-journald[1706]: File /var/log/journal/bef254e7fd904a3faaed5abbedb6262d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting OpenSSH Daemon...
[ OK ] Started OpenSSH Daemon.
Starting Network Time Service...
Starting Entropy Harvesting Daemon...
Starting Login Service...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting Permit User Sessions...
[ OK ] Started Network Time Service.
[ OK [0] Started Entropy Harvesting Daemon.
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
[ OK ] Started Login Service.
[ TIME ] Timed out waiting for device sys-subsystem-net-devices-eth0.device.
[DEPEND] Dependency failed for Automatic wired network connec...etctl profiles.
[ TIME ] Timed out waiting for device dev-hvc0.device.
[DEPEND] Dependency failed for Serial Getty on hvc0.
[ TIME ] Timed out waiting for device dev-ttyS0.device.
[DEPEND] Dependency failed for Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
')

[dhead666]

I advance a bit more after enabling FHANDLE now getting an error about the ethernet driver

$this->bbcode_second_pass_code('', 'Welcome to Arch Linux ARM!

[ 17.758819@0] systemd[1]: Failed to insert module 'ipv6'
[ 17.760002@0] systemd[1]: Set hostname to <alarm>.
[ 18.052270@0] systemd[1]: Cannot add dependency jo for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 18.06 Epecting device dev-ttyS0.device...
[ 1 Expecting device dev-hvc0.device...
[ 18.104388@0] systemd[1]: Starting Forward Password Requests to Wall Dire.
[ 18.106944@0] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
OK ] Reached target Remote File Systems.
[ 18.ystemd[1]: Reached target Remote File Systems.
[ 18.134541@0] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 18.164429@0] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 18.167203@0] systemd[1]: Started Dispatch Password Requests to Console Diru[ OK ] Reached target Paths.
[ 18.194354@0] systemd[1]: Reached target Paths.
[ 18.194524[1]: Starting Arbitrar^��&�
z-� ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 18.224388@0] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. OK ] Reached target Encrypted Volumes.
[ 18.244374@0] systemd[1]: Reached target Encry OK ] Reached target Swap.
[ 18.264350@0] systemd[1]: Reached target Swap.
[ 18.264439@0] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 24.934416@0] systemd[1]: Created slice Root Slice.
[ 24.93] Created slice User and Session Slice.
[ 24.954371@0] systemd[1]: Created slice User and Session Slice.
[ 24.9547OK ] Listening on Device-mapper event daemon FIFOs.
[ 24.974375@0] systemd[1]: Listvice-mapper event daemon FIFOs.
[ 24.975491@0] sy[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 25.004366@0] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2[ OK ] Listening on Delayed Shutdown Socket.
[ 25.024392@0] systemd[1]: Listening on Delayed Shutdown Socket.
[[ OK ] Listening on udev Control Socket.
[ 25.044emd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
[ 25.064355@0] systemd[1]: Listening on udev Kernel Socket.
[ 25.06[ OK ] Listening on LVM2 metadata daemon socket.
[ 25.084387@0] systemd[1]: Listening on LVM2 metadata daemon socket[ OK ] Listening on Journal Socket.
[ 25.104355@0] systemd[1]: Listening on Journal Socket.[ OK ] Created slice System Slice.
[ 25.124emd[1]: Created slice System Slice.
[ 25.124496@0] s OK ] Created slice system-netctl\x2difplugd.slice.
[ 25.144380@0] systemd[1]: Created slice system-netctl\x2difplugd.slice.
[ �[ OK ] Created slice system-getty.slice.
[ 25.164386@0] systemd[1]: Created slice system-getty.slice.
[ 25.164492@p[ OK ] Created slice system-serial\x2dgetty.slice.
[ 25.184emd[1]: Created slice system-serial\x2dgetty.slice.
[ 2 Starting Apply Kernel Variables...
[ 25.274904@0] systemd[1]: Mounted Huge Pages File System.
[ 25.277497@0] systemd[1]: Started Load Kernel Modules.
[ 25.279907@0] systemd[1]: Mounted Configuration File System.
[ 25.285699@0 Mounting POSIX Message Queue File System...
[ 25.43 Mounting FUSE Control File System...
[ 25.576692@0] systemd[1]: Started Set Up Additional Binary Formats.
[ 25.57 Starting udev Coldplug all Devices...
[ 25.754983@1] systemd[1]: Started Create list of required static devie nodes for the current[ 25.758844@1] s Starting Create Static Device odes in /dev...
[ 5 Starting Setup Virtual Console...
[ 26 Mounting Debug File System...
[ 26 Starting Journal Service...
[ OK ] Started Journal Service.
[ 26.43[ OK ] Reached target Slices.
Starting Remount Root and Kernel File Systems...
Mounting Temporary Directory...
[ 26.751402@1] systemd-journald[1720]: Failed to register hostname fd in event loop: Operation not permitted. Ignoring.
[ OK ] Mounted Debug File System.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Temporary Directory.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
Starting Trigger Flushing of Journal to Persistent Storage...
[ 27.875273@1] systemd-udevd[2542]: starting version 212
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Found device /dev/ttyS0.
[ 28.512311@1] systemd-journald[1720]: Received request to flush runtime journal from PID 1
[ OK ] Started Trigger Flushing of Journal to ersistent Storage.
[ OK ] Found device /dev/hvc0.
[ OK ] Found device /sys/subsystem/net/devices/eth0.
[ OK ] Reached target Sound Card.
Starting Update UTMP about System Boot/Shutdown...
[ 28.808294@1] systemd-journald[1720]: File /var/log/journal/bef254e7fd904a3faaed5abbedb6262d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting OpenSSH Daemon...
[ OK ] Started OpenSSH Daemon.
Starting Network Time Service...
Starting Entropy Harvesting Daemon...
Starting Automatic wired network connection using netctl profiles...
[ OK ] Started Automatic wired network connection using netctl profiles.
Starting Login Service...
[ 30.264058@0] netdev_open
[ 30.264089@0] Ethernet reset
[ 30.264117@0] NET MDA descpter start addr=dee89000
[ 30.271482@0] phy_reset!
[ 30.271512@0] set_phy_mode() phy_Identifier: 0x7c0f1
[ 30.284894@1] --1--write mac add to:dfa97a08: 00 00 dd b3 02 c0 |......|
[ 30.285957@1] --2-write mac add to:dfa97a08: 00 00 dd b3 02 c0 |......|
[ 30.292640@1] write mac add to:dfa97a08: 00 00 dd b3 02 c0 |......|
[ 30.298893@1] Current DMA mode=0, set mode=621c18 Starting D-Bus System Message Bus...
[ 30.309170@1] ether leave promiscuous mode
[ 30.311581@1] ether leave all muticast mode
[ 30.316015@1] changed the Multicast,mcount=1
[ 30.320016@1] add mac address:01:00:5e:00:00:01,bit=32
[ 30.325139@1] st hash low=0,high=1
[ 30.328594@1] changed the filter setting to :4
[ 30.333845@1] Ethernet Driver ioctl (8947)
[ 30.337692@1] Ethernet Driver ioctl (8948)
[ OK ] Started D-Bus System Message Bus.
Starting Permit User Sessions...
[ OK ] Started Network Time Service.
[ OK ] Started Entropy Harvesting Daemon.
[ tarted Login Service.
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
Starting Serial Getty on hvc0...
[ OK ] Started Serial Getty on hvc0.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Rached target Multi-User System.
[ OK ] Reached target Graphical Interface.
[ 31.342453@1] Ethernet Driver ioctl (8947)
[ 31.342508@1] Ethernet Driver ioctl (8948)
[ 32.346rnet Driver )
[ 32.346681@1] Ethernet Driver ioctl (8948)
[ 33.350276@1] Ethernet Driver ioctl (8947)
[ 33.350321@1] Ethernet Driver ioctl (8948)

')

[dhead666]

Finally got login via serial, network still down, something might be wrong with the network card driver, this message keeps on repeating

$this->bbcode_second_pass_code('', 'Ethernet Driver ioctl (8947)')

And in general something is definitely wrong

$this->bbcode_second_pass_code('', '[ 668.860006@0] Backtrace for cpu 0 (current):
[ 668.864280@0] [<c003fde0>] (unwind_backtrace+0x0/0xf4) from [<c003e48c>] (smp_send_all_cpu_backtrace+0x60/0xd0)
[ 668.874336@0] [<c003e48c>] (smp_send_all_cpu_backtrace+0x60/0xd0) from [<c00a4298>] (__rcu_pending+0x39c/0x400)
[ 668.884404@0] [<c00a4298>] (__rcu_pending+0x39c/0x400) from [<c00a519c>] (rcu_check_callbacks+0x128/0x1fc)
[ 668.894038@0] [<c00a519c>] (rcu_check_callbacks+0x128/0x1fc) from [<c006d038>] (update_process_times+0x44/0x58
[ 668.904106@0] [<c006d038>] (update_process_times+0x44/0x58) from [<c008a3e4>] (tick_sched_timer+0x94/0xd0)
[ 668.913742@0] [<c008a3e4>] (tick_sched_timer+0x94/0xd0) from [<c007edc4>] (__ru_hrtimer.isra.31+0x5c/0x124)
[ 668.923549@0] [<c007edc4>] (__run_hrtimer.isra.31+0x5c/0x124) from [<c007f780>] (hrtimer_interrupt+0x110/0x2a8)
[ 668.933619@0] [<c007f780_interrupt+0x110/0x2a8) from [<c0048174>] (meson_timer_interrupt+0x24/0x9c)
[ 668.943603@0] [<c0048174>] (meson_timer_interrupt+0x24/0x9c) from [<c009f0f8>] (handle_irq_event_percpu+0x54/0x160)
[ 668.954017@0] [<c009f0f8>] (handle_irq_event_percpu+0x54/0x160) from [<c009f240>] (handle_irq_event+0x3c/0x5c)
[ 668.963998@0] [<c009f240>] (handle_irq_event+0x3c/0x5c) from [<c00a15f8>] (handle_fasteoi_irq+0x9c/0x168)
[ 668.973546@0] [<c00a15f8>] (handle_fasteoi_irq+0x9c/0x168) from [<c009ea24>] (generic_handle_irq+0x24/0x34)
[ 668.983273@0] [<c009ea24>] (generic_handle_irq+0x24/0x34) from [<c0033058>] (asm_do_IRQ+0x58/0xb0)
[ 668.992211@0] [<c0033058>] (asm_do_IRQ+x58/0xb0) from [<c0038acc>] (__irq_svc+0x4c/0xe4)
[ 669.000363@0] Exception stack(0xc080df70 to 0xc080dfb8)
[ 669.005572@0] df60: 00000003 0000009b 00000000 00000001
[ 669.013906@0] df80: c0861284 c05d9810 c080c000 c0819d1 8000406a 413fc090 00000000 00000000
[ 669.022237@0] dfa0: 20070013 c080dfb8 c003a4fc c003a538 20070013 ffffffff
[ 669.029012@0] [<c0038acc>] (__irq_svc+0x4c/0xe4) from [<c003a538>] (cpu_idle+0x88/0xf0)
[ 669.036998@0] [<c003a538>] (cpu_idle+0x88/0xf0) from [<c0008914>] (start_kernel+0x2e8/0x2f4)
[ 669.045416@0] [<c0008914>] (start_kernel+0x2e8/0x2f4) from [<80008040>] (0x80008040)
[ 669.053137@0]
[ 669.053138@0] sending IPI to all other CPUs:
')

I'm getting all these messages on ttyS0 instead on dmesg, I probably need to tweak the error log level.

[dhead666]

I created a package if anyone want to give this a try, it's a board specific and the board files includes the nand partitioning addresses.
https://github.com/dhead666/PKGBUILDs/t ... nux-meson6

Here are the warnings during the build process, I probably need to figure out what they're meaning.

$this->bbcode_second_pass_code('', 'arch/arm/mm/dma-mapping.c: In function '__dma_alloc':
arch/arm/mm/dma-mapping.c:238:25: warning: array subscript is above array bounds [-Warray-bounds]
arch/arm/mm/dma-mapping.c: In function 'dma_free_coherent':
arch/arm/mm/dma-mapping.c:284:25: warning: array subscript is above array bounds [-Warray-bounds]


arch/arm/mach-meson6/clock.c: In function 'meson_clock_init':
arch/arm/mach-meson6/clock.c:2402:53: warning: initialization from incompatible pointer type [enabled by default]
arch/arm/mach-meson6/clock.c:2402:53: warning: (near initialization for 'clk_pll_sys.set_rate') [enabled by default]
arch/arm/kernel/return_address.c:62:2: warning: #warning "TODO: return_address should use unwind tables" [-Wcpp]
#warning "TODO: return_address should use unwind tables"
^
arch/arm/mach-meson6/usbclock.c: In function 'set_usb_phy_clk':
arch/arm/mach-meson6/usbclock.c:61:22: warning: unused variable 'uart' [-Wunused-variable]
arch/arm/plat-meson/cpu_freq.c:46:2: warning: missing braces around initializer [-Wmissing-braces]
arch/arm/plat-meson/cpu_freq.c:46:2: warning: (near initialization for 'meson_freq_table[0]') [-Wmissing-braces]


kernel/cpu.c: In function 'cpu_down':
kernel/cpu.c:295:2: warning: function declaration isn't a prototype [-Wstrict-prototypes]
kernel/cpu.c:295:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
kernel/cpu.c: In function '_cpu_up':
kernel/cpu.c:327:2: warning: function declaration isn't a prototype [-Wstrict-prototypes]
kernel/cpu.c:327:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]


arch/arm/plat-meson/gic-irq.c: In function 'meson_init_irq':
arch/arm/plat-meson/gic-irq.c:80:1: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
arch/arm/plat-meson/gic-irq.c: At top level:
arch/arm/plat-meson/gic-irq.c:37:17: warning: 'irq_level' defined but not used [-Wunused-variable]


In file included from arch/arm/mach-meson6/board-m6g18.c:71:0:
arch/arm/mach-meson6/include/mach/voltage.h:34:52: warning: 'struct regulator' declared inside parameter list [enabled by default]
arch/arm/mach-meson6/include/mach/voltage.h:34:52: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
arch/arm/mach-meson6/include/mach/voltage.h:36:29: warning: 'struct regulator' declared inside parameter list [enabled by default]
arch/arm/mach-meson6/board-m6g18.c: In function 'usb_wifi_power':
arch/arm/mach-meson6/board-m6g18.c:1263:5: warning: 'return' with a value, in function returning void [enabled by default]
arch/arm/mach-meson6/board-m6g18.c: At top level:
arch/arm/mach-meson6/board-m6g18.c:1267:5: warning: initialization from incompatible pointer type [enabled by default]
arch/arm/mach-meson6/board-m6g18.c:1267:5: warning: (near initialization for 'wifi_plat_data.usb_set_power') [enabled by default]
arch/arm/mach-meson6/board-m6g18.c:1369:8: warning: return type defaults to 'int' [-Wreturn-type]
arch/arm/mach-meson6/board-m6g18.c:1369:8: warning: function declaration isn't a prototype [-Wstrict-prototypes]
arch/arm/mach-meson6/board-m6g18.c:1499:12: warning: function declaration isn't a prototype [-Wstrict-prototypes]
arch/arm/mach-meson6/board-m6g18.c: In function 'set_voltage':
arch/arm/mach-meson6/board-m6g18.c:1516:1: warning: no return statement in function returning non-void [-Wreturn-type]
arch/arm/mach-meson6/board-m6g18.c: At top level:
arch/arm/mach-meson6/board-m6g18.c:1529:13: warning: function declaration isn't a prototype [-Wstrict-prototypes]
arch/arm/mach-meson6/board-m6g18.c:1634:21: warning: function declaration isn't a prototype [-Wstrict-prototypes]
arch/arm/mach-meson6/board-m6g18.c: In function 'vcck_cur_max_freq':
arch/arm/mach-meson6/board-m6g18.c:1636:126: warning: passing argument 1 of 'meson_vcck_cur_max_freq' from incompatible pointer type [enabled by default]
In file included from arch/arm/mach-meson6/board-m6g18.c:71:0:
arch/arm/mach-meson6/include/mach/voltage.h:33:21: note: expected 'struct regulator *' but argument is of type 'struct regulator *'
arch/arm/mach-meson6/board-m6g18.c: In function 'vcck_scale':
arch/arm/mach-meson6/board-m6g18.c:1642:29: warning: passing argument 1 of 'meson_vcck_scale' from incompatible pointer type [enabled by default]
In file included from arch/arm/mach-meson6/board-m6g18.c:71:0:
arch/arm/mach-meson6/include/mach/voltage.h:35:12: note: expected 'struct regulator *' but argument is of type 'struct regulator *'
arch/arm/mach-meson6/board-m6g18.c: In function 'smc_io_setup':
arch/arm/mach-meson6/board-m6g18.c:2358:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
arch/arm/mach-meson6/board-m6g18.c: In function 'meson_init_machine':
arch/arm/mach-meson6/board-m6g18.c:2639:5: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
arch/arm/mach-meson6/board-m6g18.c: At top level:
arch/arm/mach-meson6/board-m6g18.c:488:122: warning: 'aml_i2c_init' defined but not used [-Wunused-function]
arch/arm/mach-meson6/board-m6g18.c:756:13: warning: 'reg_on_control' defined but not used [-Wunused-function]
arch/arm/mach-meson6/board-m6g18.c:868:12: warning: 'meson_mmc_detect' defined but not used [-Wunused-function]
arch/arm/mach-meson6/board-m6g18.c:1369:8: warning: 'setup_aml_efuse' defined but not used [-Wunused-function]
arch/arm/plat-meson/gic-fiq.c:53:21: warning: function declaration isn't a prototype [-Wstrict-prototypes]


arch/arm/mach-meson6/hotplug.c:84:6: warning: function declaration isn't a prototype [-Wstrict-prototypes]
arch/arm/mach-meson6/hotplug.c:99:6: warning: function declaration isn't a prototype [-Wstrict-prototypes]


arch/arm/mach-meson6/platsmp.c: In function 'platform_secondary_init':
arch/arm/mach-meson6/platsmp.c:46:1: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]


arch/arm/mm/alignment.c: In function 'do_alignment':
arch/arm/mm/alignment.c:298:15: warning: 'offset.un' may be used uninitialized in this function [-Wmaybe-uninitialized]
arch/arm/mm/alignment.c:720:21: note: 'offset.un' was declared here


drivers/amlogic/amports/tsdemux.c: In function 'limited_delay_check':
drivers/amlogic/amports/tsdemux.c:644:108: warning: comparison of distinct pointer types lacks a cast [enabled by default]


block/bfq-iosched.c: In function 'bfq_quantum_store':
block/bfq-iosched.c:3079:255: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3079:150: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_back_seek_max_store':
block/bfq-iosched.c:3084:261: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3084:156: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_back_seek_penalty_store':
block/bfq-iosched.c:3085:265: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3085:160: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_max_budget_async_rq_store':
block/bfq-iosched.c:3088:267: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3088:162: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_raising_coeff_store':
block/bfq-iosched.c:3092:261: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3092:156: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_raising_max_softrt_rate_store':
block/bfq-iosched.c:3102:271: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3102:166: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_max_budget_store':
block/bfq-iosched.c:3133:14: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c: In function 'bfq_low_latency_store':
block/bfq-iosched.c:3166:16: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c: In function 'bfq_raising_min_inter_arr_async_store':
block/bfq-iosched.c:3100:275: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3100:170: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_raising_min_idle_time_store':
block/bfq-iosched.c:3098:269: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3098:164: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_raising_rt_max_time_store':
block/bfq-iosched.c:3096:267: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3096:162: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_raising_max_time_store':
block/bfq-iosched.c:3094:264: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3094:159: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_timeout_async_store':
block/bfq-iosched.c:3090:261: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3090:156: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_slice_idle_store':
block/bfq-iosched.c:3087:258: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3087:153: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_fifo_expire_async_store':
block/bfq-iosched.c:3082:265: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3082:160: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_fifo_expire_sync_store':
block/bfq-iosched.c:3080:264: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]
block/bfq-iosched.c:3080:159: note: '__data' was declared here
block/bfq-iosched.c: In function 'bfq_timeout_sync_store':
block/bfq-iosched.c:3152:18: warning: '__data' may be used uninitialized in this function [-Wmaybe-uninitialized]


drivers/amlogic/amports/video.c: In function 'video_receiver_event_fun':
drivers/amlogic/amports/video.c:2093:9: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]


drivers/amlogic/amports/video2.c:2449:12: warning: 'tvin_started' defined but not used [-Wunused-variable]


drivers/amlogic/amports/jpegdec.c: In function '_dec_run':
drivers/amlogic/amports/jpegdec.c:376:5: warning: suggest parentheses around '+' inside '<<' [-Wparentheses]
drivers/amlogic/amports/jpegdec.c:376:5: warning: suggest parentheses around '+' inside '<<' [-Wparentheses]
drivers/amlogic/amports/jpegdec.c:377:5: warning: suggest parentheses around '+' inside '<<' [-Wparentheses]
drivers/amlogic/amports/jpegdec.c:377:5: warning: suggest parentheses around '+' inside '<<' [-Wparentheses]


drivers/amlogic/deinterlace/deinterlace.c: In function 'dump_vframe':
drivers/amlogic/deinterlace/deinterlace.c:2416:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'struct list_head' [-Wformat=]
drivers/amlogic/deinterlace/deinterlace.c: In function 'dump_state':
drivers/amlogic/deinterlace/deinterlace.c:2470:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'struct di_buf_t *' [-Wformat=]
drivers/amlogic/deinterlace/deinterlace.c:2475:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'struct di_buf_t *' [-Wformat=]
drivers/amlogic/deinterlace/deinterlace.c: At top level:
drivers/amlogic/deinterlace/deinterlace.c:5152:20: warning: 'timer_irq' defined but not used [-Wunused-function]


sound/soc/codecs/rt5631.c:2415:5: warning: initialization from incompatible pointer type [enabled by default]
sound/soc/codecs/rt5631.c:2415:5: warning: (near initialization for 'rt5631_i2c_driver.shutdown') [enabled by default]
sound/soc/codecs/rt5631.c:52:12: warning: 'ref_count' defined but not used [-Wunused-variable]


drivers/amlogic/display/vout/vdac_switch.c: In function 'vdacswitch_mode_store':
drivers/amlogic/display/vout/vdac_switch.c:147:17: warning: unused variable 'mode_in_lower' [-Wunused-variable]


drivers/amlogic/efuse/keys/core.c: In function 'aml_key_decrypt':
drivers/amlogic/efuse/keys/core.c:380:2: warning: passing argument 2 of 'do_aes_internal' discards 'const' qualifier from pointer target type [enabled by default]
drivers/amlogic/efuse/keys/core.c:332:12: note: expected 'unsigned char *' but argument is of type 'const void *'
drivers/amlogic/efuse/keys/core.c: In function 'aml_key_store':
drivers/amlogic/efuse/keys/core.c:739:5: warning: passing argument 2 of 'aml_key_encrypt' from incompatible pointer type [enabled by default]
drivers/amlogic/efuse/keys/core.c:333:12: note: expected 'size_t *' but argument is of type 'uint16_t *'
drivers/amlogic/efuse/keys/core.c: In function 'key_name_store':
drivers/amlogic/efuse/keys/core.c:1098:7: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
drivers/amlogic/efuse/keys/core.c:1145:7: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
drivers/amlogic/efuse/keys/core.c:1161:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
drivers/amlogic/efuse/keys/core.c: In function 'get_aml_key_kernel':
drivers/amlogic/efuse/keys/core.c:1575:55: warning: operation on 'i' may be undefined [-Wsequence-point]
drivers/amlogic/efuse/keys/core.c: At top level:
drivers/amlogic/efuse/keys/core.c:504:12: warning: 'aml_key_write_hash' defined but not used [-Wunused-function]
drivers/amlogic/efuse/keys/core.c:1069:16: warning: 'key_list_store' defined but not used [-Wunused-function]


drivers/amlogic/efuse/keys/version3_extend.c: In function 'version3_init':
drivers/amlogic/efuse/keys/version3_extend.c:570:3: warning: passing argument 2 of 'prov->read' from incompatible pointer type [enabled by default]
drivers/amlogic/efuse/keys/version3_extend.c:570:3: note: expected 'uint8_t *' but argument is of type 'struct v3_key_storage_head *'
drivers/amlogic/efuse/keys/version3_extend.c:584:5: warning: passing argument 2 of 'prov->read' from incompatible pointer type [enabled by default]
drivers/amlogic/efuse/keys/version3_extend.c:584:5: note: expected 'uint8_t *' but argument is of type 'struct v3_key_storage_head *'


drivers/amlogic/hdmi/hdmi_tx/hdmi_tx_video.c: In function 'hdmitx_set_display':
drivers/amlogic/hdmi/hdmi_tx/hdmi_tx_video.c:279:62: warning: 'ec' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/amlogic/hdmi/hdmi_tx/hdmi_tx_cec.c:886:14: warning: 'rx_status' defined but not used [-Wunused-variable]


drivers/i2c/i2c-core.c: In function 'i2c_new_existing_device':
drivers/i2c/i2c-core.c:607:1: warning: label 'out_err_silent' defined but not used [-Wunused-label]
drivers/i2c/i2c-core.c:604:1: warning: label 'out_err' defined but not used [-Wunused-label]


drivers/input/joystick/analog.c:175:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp]
#warning Precise timer not defined for this architecture.
^


drivers/amlogic/nand/aml_nand.c:48:14: warning: 'aml_nand_bch_string' defined but not used [-Wunused-variable]
drivers/amlogic/nand/aml_nand.c:56:14: warning: 'aml_nand_plane_string' defined but not used [-Wunused-variable]
drivers/amlogic/nand/aml_nand.c:61:14: warning: 'aml_nand_internal_string' defined but not used [-Wunused-variable]
drivers/amlogic/nand/aml_nand.c: In function 'aml_nand_save_env.part.6':
drivers/amlogic/nand/aml_nand.c:4884:8: warning: 'data_buf' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/amlogic/nand/aml_nand.c:4820:17: note: 'data_buf' was declared here


drivers/amlogic/nand/m3_nand.c: In function 'm3_nand_boot_read_page_hwecc':
drivers/amlogic/nand/m3_nand.c:744:37: warning: unused variable 'ran_mode' [-Wunused-variable]
drivers/amlogic/nand/m3_nand.c: In function 'm3_nand_boot_write_page':
drivers/amlogic/nand/m3_nand.c:865:60: warning: unused variable 'write_page_tmp' [-Wunused-variable]
drivers/amlogic/nand/m3_nand.c: In function 'show_nand_version_info':
drivers/amlogic/nand/m3_nand.c:1309:27: warning: unused variable 'aml_chip' [-Wunused-variable]
drivers/amlogic/nand/m3_nand.c: In function 'm3_nand_boot_write_page':
drivers/amlogic/nand/m3_nand.c:923:24: warning: 'ran_mode' may be used uninitialized in this function [-Wmaybe-uninitialized]


In file included from drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:46:0:
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.h:33:15: warning: useless storage class specifier in empty declaration [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c: In function 'aml_nftl_flush':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:74:26: warning: unused variable 'aml_nftl_part' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c: In function 'aml_nftl_init_bounce_buf':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:163:6: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat=]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:157:13: warning: unused variable 'i' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c: In function 'do_nftltrans_request':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:242:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:232:26: warning: unused variable 'aml_nftl_part' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c: In function 'aml_nftl_thread':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:360:18: warning: unused variable 'ts_nftl_current' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c: In function 'aml_nftl_reboot_notifier':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:413:26: warning: unused variable 'aml_nftl_part' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c: In function 'aml_nftl_release':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:553:26: warning: unused variable 'aml_nftl_part' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c: At top level:
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.c:335:12: warning: 'flush_time_out' defined but not used [-Wunused-function]


In file included from drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:12:0:
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.h:33:15: warning: useless storage class specifier in empty declaration [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:50:5: warning: initialization from incompatible pointer type [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:50:5: warning: (near initialization for 'nftl_class_attrs[1].show') [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:51:5: warning: initialization from incompatible pointer type [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:51:5: warning: (near initialization for 'nftl_class_attrs[2].show') [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:52:5: warning: initialization from incompatible pointer type [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:52:5: warning: (near initialization for 'nftl_class_attrs[3].show') [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:53:5: warning: initialization from incompatible pointer type [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:53:5: warning: (near initialization for 'nftl_class_attrs[4].show') [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c: In function 'aml_nftl_initialize':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:117:2: warning: passing argument 8 of 'aml_nftl_start' discards 'const' qualifier from pointer target type [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:14:12: note: expected 'char *' but argument is of type 'const char *'
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:122:26: warning: assignment from incompatible pointer type [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:123:27: warning: assignment from incompatible pointer type [enabled by default]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:130:6: warning: passing argument 1 of 'strcpy' discards 'const' qualifier from pointer target type [enabled by default]
In file included from include/linux/bitmap.h:8:0,
from include/linux/nodemask.h:93,
from include/linux/mmzone.h:16,
from include/linux/gfp.h:4,
from include/linux/kmod.h:22,
from include/linux/module.h:13,
from include/linux/mtd/mtd.h:24,
from drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:9:
include/linux/string.h:24:15: note: expected 'char *' but argument is of type 'const char *'
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:140:6: warning: passing argument 1 of 'strcpy' discards 'const' qualifier from pointer target type [enabled by default]
In file included from include/linux/bitmap.h:8:0,
from include/linux/nodemask.h:93,
from include/linux/mmzone.h:16,
from include/linux/gfp.h:4,
from include/linux/kmod.h:22,
from include/linux/module.h:13,
from include/linux/mtd/mtd.h:24,
from drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:9:
include/linux/string.h:24:15: note: expected 'char *' but argument is of type 'const char *'
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:100:16: warning: unused variable 'nftl_oob_buf' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:98:11: warning: unused variable 'phys_erase_shift' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:97:67: warning: unused variable 'i' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:97:62: warning: unused variable 'temp' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:97:50: warning: unused variable 'total_pages' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:97:38: warning: unused variable 'total_block' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:97:26: warning: unused variable 'size_in_blk' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:97:11: warning: unused variable 'phy_page_addr' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:96:30: warning: unused variable 'oob_len' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:96:17: warning: unused variable 'phy_blk_num' [-Wunused-variable]
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c: In function 'do_test':
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_init.c:287:2: warning: format '%x' expects argument of type 'unsigned int *', but argument 3 has type 'uint32 *' [-Wformat=]


In file included from drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_hw_interface.c:12:0:
drivers/amlogic/nand/aml_nftl_new/block/aml_nftl_block.h:33:15: warning: useless storage class specifier in empty declaration [enabled by default]


drivers/amlogic/ppmgr/ppmgr_vpp.c: In function 'ppmgr_task':
drivers/amlogic/ppmgr/ppmgr_vpp.c:2263:23: warning: comparison of distinct pointer types lacks a cast [enabled by default]
drivers/amlogic/ppmgr/ppmgr_vpp.c:2263:47: warning: comparison of distinct pointer types lacks a cast [enabled by default]


drivers/amlogic/ppmgr/ppmgr_3d_tv.c:1178:13: warning: 'process_2d_to_3d' defined but not used [-Wunused-function]


drivers/amlogic/smartcard/smartcard.c: In function 'smc_hw_set_param':
drivers/amlogic/smartcard/smartcard.c:245:21: warning: unused variable 'reg5' [-Wunused-variable]
drivers/amlogic/smartcard/smartcard.c:244:23: warning: unused variable 'reg_int' [-Wunused-variable]
drivers/amlogic/smartcard/smartcard.c:243:21: warning: unused variable 'reg2' [-Wunused-variable]
drivers/amlogic/smartcard/smartcard.c:242:23: warning: unused variable 'reg1' [-Wunused-variable]
drivers/amlogic/smartcard/smartcard.c: At top level:
drivers/amlogic/smartcard/smartcard.c:350:13: warning: function declaration isn't a prototype [-Wstrict-prototypes]
drivers/amlogic/smartcard/smartcard.c:360:13: warning: function declaration isn't a prototype [-Wstrict-prototypes]
drivers/amlogic/smartcard/smartcard.c: In function 'smc_read':
drivers/amlogic/smartcard/smartcard.c:927:23: warning: unused variable 'sc_int_reg' [-Wunused-variable]
drivers/amlogic/smartcard/smartcard.c: At top level:
drivers/amlogic/smartcard/smartcard.c:1159:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/amlogic/smartcard/smartcard.c:1159:2: warning: (near initialization for 'smc_fops.unlocked_ioctl') [enabled by default]
drivers/amlogic/smartcard/smartcard.c: In function 'smc_ioctl':
drivers/amlogic/smartcard/smartcard.c:1068:17: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c:1079:17: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c:1108:16: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c:1118:18: warning: ignoring return value of 'copy_from_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c: In function 'smc_write':
drivers/amlogic/smartcard/smartcard.c:1030:18: warning: ignoring return value of 'copy_from_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c:1033:18: warning: ignoring return value of 'copy_from_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c:1034:18: warning: ignoring return value of 'copy_from_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c: In function 'smc_read':
drivers/amlogic/smartcard/smartcard.c:977:16: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c:980:16: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result [-Wunused-result]
drivers/amlogic/smartcard/smartcard.c:981:16: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result [-Wunused-result]


drivers/amlogic/uart/uart/am_uart.c: In function 'am_uart_restart_port':
drivers/amlogic/uart/uart/am_uart.c:729:21: warning: unused variable 'port' [-Wunused-variable]
drivers/amlogic/uart/uart/am_uart.c: In function 'am_uart_console_write':
drivers/amlogic/uart/uart/am_uart.c:840:16: warning: unused variable 'flags' [-Wunused-variable]
drivers/amlogic/uart/uart/am_uart.c:839:21: warning: unused variable 'wr_lock' [-Wunused-variable]
drivers/amlogic/uart/uart/am_uart.c: In function 'am_uart_resume':
drivers/amlogic/uart/uart/am_uart.c:896:11: warning: unused variable 'ret' [-Wunused-variable]


drivers/media/common/tuners/max2165.c: In function 'max2165_set_params':
drivers/media/common/tuners/max2165.c:203:11: warning: 'fraction' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/common/tuners/max2165.c:196:16: note: 'fraction' was declared here
drivers/media/common/tuners/max2165.c:205:19: warning: 'quotient' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/common/tuners/max2165.c:196:6: note: 'quotient' was declared here


drivers/media/common/tuners/tda18218.c: In function 'tda18218_attach':
drivers/media/common/tuners/tda18218.c:302:19: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized]


drivers/media/common/tuners/tda18212.c: In function 'tda18212_attach':
drivers/media/common/tuners/tda18212.c:248:19: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized]


drivers/amlogic/usb/dwc_otg/294/dwc_otg_pcd_intr.c: In function 'ep0_complete_request':
drivers/amlogic/usb/dwc_otg/294/dwc_otg_pcd_intr.c:2013:4: warning: 'desc_sts.b.bytes' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/amlogic/usb/dwc_otg/294/dwc_otg_pcd_intr.c:1910:21: note: 'desc_sts.b.bytes' was declared here


drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd.c: In function 'isoc_complete_tasklet_func':
drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd.c:719:6: warning: unused variable 'cnt' [-Wunused-variable]
drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd.c:718:27: warning: unused variable 'urb_list' [-Wunused-variable]
drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd.c:717:19: warning: unused variable 'iso_comp_urb_entry' [-Wunused-variable]
drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd.c:716:21: warning: unused variable 'urb' [-Wunused-variable]


drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd_intr.c: In function 'update_isoc_urb_state':
drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd_intr.c:679:27: warning: unused variable 'urb_list' [-Wunused-variable]


drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd_queue.c: In function 'dwc_otg_hcd_qtd_add':
drivers/amlogic/usb/dwc_otg/294/dwc_otg_hcd_queue.c:714:17: warning: unused variable 'flags' [-Wunused-variable]


drivers/amlogic/vfm/vfm.c: In function 'vfm_init':
drivers/amlogic/vfm/vfm.c:303:5: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
net/sched/sch_generic.c: In function 'dev_graft_qdisc':
net/sched/sch_generic.c:678:66: warning: the comparison will always evaluate as 'true' for the address of 'noop_qdisc' will never be NULL [-Waddress]


fs/yaffs2/yaffs_vfs.c:2398:2: warning: initialization from incompatible pointer type [enabled by default]
fs/yaffs2/yaffs_vfs.c:2398:2: warning: (near initialization for 'yaffs_fs_type.mount') [enabled by default]
fs/yaffs2/yaffs_vfs.c:2422:2: warning: initialization from incompatible pointer type [enabled by default]
fs/yaffs2/yaffs_vfs.c:2422:2: warning: (near initialization for 'yaffs2_fs_type.mount') [enabled by default]


drivers/media/dvb/frontends/s5h1420.c: In function 's5h1420_set_voltage':
drivers/media/dvb/frontends/s5h1420.c:133:2: warning: enumeration value 'SEC_VOLTAGE_ON' not handled in switch [-Wswitch]


drivers/media/dvb/frontends/ds3000.c: In function 'ds3000_set_voltage':
drivers/media/dvb/frontends/ds3000.c:463:2: warning: enumeration value 'SEC_VOLTAGE_ON' not handled in switch [-Wswitch]


drivers/spi/spi.c: In function 'spi_async_locked':
drivers/spi/spi.c:875:21: warning: unused variable 'master' [-Wunused-variable]


drivers/amlogic/wifi/rtl8xxx_EU/os_dep/linux/ioctl_linux.c: In function 'rtw_mp_efuse_get':
drivers/amlogic/wifi/rtl8xxx_EU/os_dep/linux/ioctl_linux.c:8945:65: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
drivers/amlogic/wifi/rtl8xxx_EU/os_dep/linux/ioctl_linux.c:8933:3: note: containing loop
drivers/amlogic/wifi/rtl8xxx_EU/os_dep/linux/ioctl_linux.c:9289:69: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
drivers/amlogic/wifi/rtl8xxx_EU/os_dep/linux/ioctl_linux.c:9283:3: note: containing loop
')

[dhead666]

I still can't do anything with kernel 3.0.101, my device look to be freezing after getting to the "Graphical Interface" target.
As I disabled the ethernet module I don't get any errors with that regards or at all after the message about the "Graphical Interface" target.

As I see it there are two ways to approach this:

* Try to fix all the issues raised by the warnings of the build process.
I've got no idea if this will solve my problem and it will probably wil take quite some time as I'm uneducated in this field (and I don't know if I'll be able to succeed).

* Try using Amlogic 3.10 release that at first glance seems to build with less warnings, but I'll need to port the existing board files as the generic one supplied for the M6 doesn't boot my device.
I hope that I don't need to build also an updated uboot version, which I don't know if sources for existing uboot version of my device are available.

Overall, bummer.

[dhead666]

I gave kernel 3.0.101 a last chance today.

I used linaro toolchain to build against an older version of gcc that I know is working perfectly in a Buildroot based Linux OS for the device and it didn't helped.
I reverted the kernel to a commit that is close to what I believe originaly released kernel sources of Amlogic (3.0.50) and again no result.
i also compared the config to sthe one of unxi7 and enabled more modules but nothing changed.
Moved rootfs from sd card to usb drive, still the same.

Main issue is that I can't get a login via serial (although from time to time it works for a second).

I'm giving up on 3.0.101. maybe it's too much broken or I'm doing something really wrong, it doesn't matter, better to start to work with the updated 3.10.

[dhead666]

Got kernel 3.10 booting, booted by the legacy binary uboot installed in the device and used the appened fdt method for the kernel to get the fdb file.
Serial seems to be working perfect, no networking and there're still some major issues to be fixed.

$this->bbcode_second_pass_code('', '## Booting kernel from Legacy Image at 82000000 ...
Image Name:
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3533938 Bytes = 3.4 MiB
Load Address: 82000000
Entry Point: 82000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
machid from environment: 0x4e27
EFUSE machid is not set.
Using machid 0x4e27 from environment

Starting kerel ...

[ 0.000000@0] Booting Linux on physica CPU 0x200
[ 0.000000@0] Linux version 3.10.10 (dhead@arch-xen-01) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG inaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #4 SMP PREEMPT Mon May 12 19:47:50 IDT 2014
[ 0.000000@0] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000@0] Machine: Amlogic Meson6 platform, model AMLOGIC
[ 0.000000@0] physical memory start address is 0x80000000
[ 0.000000@0] reerved_end is 8cffffff
[ 0.000000@0] reserved 511M-512M 1M memory for firmware
[ 0.000000@0] Total memory is 1024 MiB
[ 0.000000@0] Reserved low memory from 0x85000000 to 0x8cffffff, size: 128 MiB
[ 0.000000@0] ion_dev0(lo) : 0x85100000 - 0x87100000 ( 32 MiB)
[ 0.000000@0] mesonfb0(low) : 0x87100000 - 0x87900000 ( 8 MiB)
[ 0.000000@0] mesonfb1(low) : 0x87900000 - 0x87a00000 ( 1 MiB)
[ 0.000000@0] deinterlace0(low) : 0x87a00000 - 0x89600000 ( 28 MiB)
[ 0.000000@0] mesonstream0(low) : 0x89600000 - 0x8a000000 ( 10 MiB)
[ 0.000000@0] vdec0(low) : 0x8a000000 - 0x8c000000 ( 32 MiB)
[ 0.000000@0] ppmgr0(low) : 0x8c000000 - 0x8d000000 ( 16 MiB)
[ 0.000000@0] Ignore bootargs 'mem' param.
[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c11b5000 s8256 r8192 d16320 u32768
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227616
[ 0.000000@0] Kernel command line: root=/dev/sda1 rw rootfstype=ext4 rootwait init=/usr/sbin/init console=ttyS0,115200n8 logo=osd1,0x84100000,720p nohlt vmalloc=256m mem=1024m
[ 0.000000@0] osd1:1
[ 0.000000@0] 720p:6
[ 0.000000@0] PID hash table enries: 4096 (order: 2, 16384 bytes)
[ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000@0] Memory: 80MB 303MB 512MB = 895MB total
[ 0.000000@0] Memory: 898476k/898476k available, 18004k reserved, 278528K highmem
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vector : 0xffff0000 - 0xf 4 kB)
[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000@0] vmalloc : 0xef800000 - 0xff000000 ( 248 MB)
[ 0.000000@0] lowme : 0xc0000000 - 0xef000000 ( 752 MB)
[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000@0] .text : 0xc0008000 - 0xc0877bac (8639 kB)
[ 0.000000@0] .init : 0xc0878000 - 0xc08ab040 ( 205 kB)
[ 0.000000@0] .data : 0xc08ac000 - 0xc090e600 ( 394 kB)
[ 0.000000@0] .bss : 0xc090e600 - 0xc09a758c ( 612 kB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] NR_IRQS:256
[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000@0] Global timer: MESON IMER-A (c08c9d40) initialized
[ 0.000000@0] Disable timerA
[ 0.000000@0] Console: colour dummy device 80x30
[ 0.000000@0] console [ttyS0] enabled
[ 0.290064@ing delay loop... 2387.14 BogoMIPS (lpj
[ 0.350056@0] pid_max: default: 32768 minimum: 301
[ 0.352190@0] Security Framework initialized
[ 0.356314@0] SELinux: Initializing.
[ 0.360128@0] Mount-cache hash table entries: 512
[ 0.367914@0] Initializing cgroup subsys freezer
[ 0.369309@0] CPU: Testing write buffer coherency: ok
[ 0.374779@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[ 0.380155@0] Local timer: MESON TIMER-B (c08c9e40) for CPU0 initialized
[ 0.386774@0] Disable timerA
[ 0.389632@0] Disable timerB
[ 0.392505@0] Disable timerA
[ 0.395508@0] Setting up static identity map for 0xc061e8c8 - 0xc061e920
[ 0.402211@0] L310 cache controller enabled
[ 0.406212@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c8, Cache size: 524288 B
[ 0.413741@0] AUX_CTRL 0x3e460000, PERFETCH_CTRL 0x3000_CTRL 0x00000000
[ 0.421840@0] TAG_LATENCY 0x0000222, DATA_LATENCY 0x00000222
[ 0.480552@1] CPU1: Booted secondary processor
[ 0.540180@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[ 0.540193@1] Local timer: MESON TIMER-D (c08ca040) for CPU1 initialized
[ 0.540255@0] Brought up 2 CPUs
[ 0.540260@0] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
[ 0.540264@0] CPU: All CPU(s) started in SVC mode.
[ 0.540835@0] devtmpfs: initialized
[ 0.545254@0] clkrate [ xtal ] : 24000000
[ 0.545260@0] clkrate [ pll_sys ] : 1200000000
[ 0.545265@0] clkrate [ pll_fixed ] : 2000000000
[ 0.545268@0] clkrate [ pll_vid2 ] : 378000000
[ 0.545271@0] clkrate [ pll_hpll ] : 378000000
[ 0.545339@0] cl_ddr ] : 516000000
[ 0.545343@0] clkrate [ a9_clk ] : 1200000000
[ 0.545411@0] clkrate [ clk81 ] : 200000000
[ 0.545824@0] pinctrl core: initialized pinctrl subsystem
[ 0.546050@0] regulator-dummy: no parameters
[ 0.546272@0] NET: Registered protocol family 16
[ 0.563797@allocated 4096 KiB pool for atomic coherent allocations
[ 0.565869@0] amlogic_gpio gpio: Probed amlogic GPIO driver
[ 0.565941@0] register lm device lm-root
[ 0.565971@0] register lm device lm1
[ 0.565995@0] register lm device lm0
[ 0Init pinux probe!
[ 0.566806@0] pinmux-m6 pinmux: Probed amlogic pinctrl drier
[ 0.566853@0] -------early_init_dt_probe:38----------
[ 0.566938@0] -------early_init_dt_init:115----------
[ 0.566941@0] tv_init_module
[ 0.566951@0] major number 254 for disp
[ 0.566954@0] vout_register_server
[ 0.566956@0] register tv module server ok
[ 0.566981@0] major number 0 for disp
[ 0.566984@0] register tv module server ok
[ 0.567046@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_init
[ 0.567078@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe
[ 0.567084@0] plat->sate_name:default
[ 0.567092@0] master_no = 0, maseter_regs=f3100500
[ 0.567193@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ee812088)
[ 0.567198@0] aml-i2c i2c-AO: aml i2c bus driver.
[ 0.567240@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe
[ 0.567243@0] plat->state_name:default
[ 0.567250@0] master_no = 1, maseter_regs=f1108500
[ 0.567310@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ee812888)
[ 0.567i2c i2c-A: aml i2c bus driver.
[ 0.567341@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe
[ 0.67345@0] plat->state_name:default
[ 0.567352@0] master_no = 2, maseter_regs=f11087c0
[ 0.567418@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ee813088)
[ 0.567422@0] aml-i2c i2c-B: aml i2c bus driver.
[ 0.567521@0] aml_pmu_init, 347
[ 0.567541@0] hdmitx: system: amhdmix_init
[ 0.567544@0] hdmitx: system: Ver: 2014Jan5a
[ 0.567587@0] hdmitx: system: amhdmitx_probe
[ 0.567836@0] amhdmitx is using the pin GPIOD_5
[ 0.567936@0] hdmitx: system: hw init
[ 0.567945@0] HDMI: get brd phy data
[ 0.567946@0] hdmi phy setting
[ 0.567995@0] HDMI: get brd phy data
[ 0.567996@0] hdmi phy setting
[ 0.580523@0] hdmitx: system: reset intr mask
[ 0.588840@0] bio: create slab <bio-0> at 0
[ 0.589409@0] SCSI subsystem initialized
[ 0.589565@0] usbcore: registered new interface driver usbfs
[ 0.589600@0] usbcore: registered new interface driver hub
[ 0.589698@0] usbcore: registered new device driver usb
[ 0.589766@0] Linux video capture interface: v2.00
[ 0.589886@0] LCD driver init
[ 0.590047@0] TV mode 720p selected.
[ 0.590051@0] [0x1b7e] = 0xff
[ 0.590053@0] [0x105f] = 0x0
[ 0.590054@0] [0x109d] = 0x814d3928
[ 0.590056@0] [0x109e] = 0x6b425012
[ 0.590058@0] [0x109f] = 0x110
[ 0.590059@0] [0x109c] = 0x1043e
[ 0.590061@0] [0x1066] = 0x10843
[ 0.590063@0] [0x1059] = 0x100
[ 0.590064@0] [0x105f] = 0x80000
[ 0.590066@0] [0x105f] = 0x88001
[ 0.590067@0] [0x105f] = 0x80003
[ 0.590069@0] [0x104a] = 0x101
[ 0.590071@0] [0x107f] = 0x8c0000c3
[ 0.590072@0] [0x1bb8] = 0x52
0.590074@0] [0x1b62] = 0x2029
[ 0.590075@0] [0x1b8d] = 0x4040
[ 0.590077@0] [0x1b8e] = 0x19
[ 0.590079@0] [0x1b94] = 0x288
[ 0.590080@0] [0x1b95] = 0xc87
[ 0.590082@0] [0x1b97] = 0xce3
[ 0.590084@0] [0x1b98] = 0x50
[ 0.590085@0] [0x1b99] = 0xf0
[ 0.590087@0] [0x1b9a] = 0x50
[ 0.590089@0] [0x1b9b] = 0x2b0
[ 0.590090@0] [0x1b9c] = 0xcb0
[ 0.590092@0] [0x1b9d] = 0x4
[ 0.590093@0] [0x1b9e] = 0x8
[ 0.590094@0] [0x1ba1] = 0x4
[ 0.590096@0] [0x1ba2] = 0x8
[ 0.590097@0] [0x1ba4] = 0x288
[ 0.590099@0] [0x1ba3] = 0xc87
[ 0.590100@0] [0x1ba6] = 0x1d
[ 0.590102@0] [0x1baf] = 0x2ec
[ 0.590103@0] [0x1ba7] = 0x100
[ 0.590105@0] [0x1ba8] = 0xa8
[ 0.590106@0] [0x1ba9] = 0xa8
[ 0.590108@0] [0x1baa] = 0x100
[ 0.590109@0] [0x1bab] = 0x0
[ 0.590111@0] [0x1bac] = 0x5
[ 0.590112@0] [0x1bae] = 02ed
[ 0.590114@0] [0x1b68] = 0x100
[ 0.590115@0] [0x1b60] = 0x0
[ 0.590117@0] [0x1b6e] = 0x200
[ 0.590118@0] [0x1b58] = 0x0
[ 0.590120@0] [0x1b7e] = 0x0
[ 0.590121@0] [0x1b64] = 0x9061
[ 0.590123@0] [0x1b65] = 0xa061
[ 0.590124@0] [0x1b66] = 0xb061
[ 0.590126@0] [0x1b78] = 0x1
[ 0.590127@0] [0x1b79] = 0x1
[ 0.590129@0] [0x1b7a] = 0x1
[ 0.590130@0] [0x1b7b] = 0x1
[ 0.590131@0] [0x1b7c] = 0x1
[ 0.590132@0] [0x1b7d] = 0x1
[ 0.590134@0] [0x271a] = 0xa
[ 0.590135@0] [0x1bfc] = 0x1000
[ 0.590137@0] [0x1c0d] = 0x3102
[ 0.590138@0] [0x1c0e] = 0x54
[ 0.590140@0] [0x1b80] = 0x1
[ [0x1b57] = 0x0
[ 0.590144@0] tvoutc_setmode[317]
[ 0.590190@0] mode is: 6
[ 0.618270@0] call aml_pmu_probe_init in
[ 0.618442@0] Advanced Linux Sound Architecture Driver Initialized.
[ 0.618853@0] Bluetooth: Core ver 2.16
[ 0.618922@0] NET: Registered protocol family 31
[ 0.618925@0] Bluetooth: HCI device and connection manager initialized
[ 0.618938@0] Bluetooth: HCI socket layer initialized
[ 0.18945@0] Bluetooth: L2CAP socket layer initialized
[ 0.618967@0] Bluetooth: Sayer initial0.620267@0] Switching to clocksource Timer-E
[ 1.072204@1] Disable timerD
[ 1.075256@0] cfg80211: Calling CRDA to update world regulatory domain
[ 1.087272@1] NET: Registered protocol family 2
[6@1] TCP established hash table entries: 8192 (order: 4, 5536 bytes)
[ 1.093452@1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.100110@1] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.106573@1] TCP: reno registered
[ 1.109869@1] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.115988@1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.122666@1] NET: Registered protocol family 1
[ 1.127953@1] audit: initializing netlink socket (disabled)
[ 1.132546@1] type=2000 audit(1.060:1): initialized
[ 1.137932@1] bounce pool size: 64 pages
[ 1.144650@1] VFS: Disk quotasdquot_6.5.2
[ 1.145585@1] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.153634@1] fuse init (API versi 1.156546@1] msgmni has been set to 1210
[ 1.161431@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.167703@1] io scheduler noop registered
[ 1.171751@1] io scheduler deadline registered
[ 1.176306@1] io scheduler cfq registered (default)
[ 1.212163@1] loop: module loaded
[ 1.212725@1] tun: Universal TUN/TAP device driver, 1.6
[ 1.215046@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.221559@1] PPP generic drier version 2.4.2
[ 1.225931@1] PPP BSD Compression module registred
[ 1.230671@1] PPP Deflate Compression module registered
[ 1.235935@1] PPP MPPE Compression module registered
[ 1.240828@1] NET: Registered protocol family 24
[ 1.245511@1] usbcore: registered new interface driver asix
[ 1.251048@1] usbcore: registered new interface driver ax88179_178a
[ 1.257279@1] usbcore: registered new interface driver cdc_ether
[ 1.263242@1] usbcore: registered new interface driver net1080
[ 1.269076@1] usbcore: registered new interface driver cdc_subset
[ 1.275133@1] usbcore: registered new interface driver zaurus
[ 1.280918@1] usbcore: registered new interface driver cdc_ncm
[ 1.286862@1] usbcore: registered new interface driver cdc_acm
[ 1.292472@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.300682@1] usbcore: registered new interface driver usb-storage
[ 1.306892@1] usbcore: registered new interface driver usbse1.312818@1] usbcore: registered new interface driver option
[ 1.318550@1] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.325858@1] mousedev: PS/2 mouse device common for all mice
[ 1.331686@1] i2c /dev entries driver
[ 1.335357@1] usbcore: registered new interface driver uvcvideo
[ 1.340905@1] USB Video Class driver (1.1.1)
[ 1.345182@1] Bluetooth: HCI UART driver ver 2.2
[ 1.349762@1]Bluetooth: HCI H4 protocol initialized
[ 1.355025@1] usbcore: registered new interface driver usbhid
[ 1.360458@1] usbhid: USB HID core driver
[ 1.364756@1] zram: Created 1 device(s) ...
[ 1.368918@1] ashmem: initialized
[ 1.371991@1] logger: created 256K log 'log_main'
[ 1.376690@1] logger: created 256K log 'log_events'
[ 1.381540@1] logger: created 256K log 'log_radio'
[ 1.386324@1] logger: created 256K log 'log_system'
[ 1.391155@1] vout_int_module
[ 1.394164@1] start init vout module
[ 1.397884@1] create vout attribute ok
[ 1.401934@1] lcd_extern_init
[ 1.404876@1] ge2d_init
[ 1.407237@1] ge2d_dev major:248
[ 1.410642@1] ge2d start monitor
[ 1.413880@1] osd_init
[ 1.416190@0] ge2d workqueue monitor start
[ 1.416298@1] Frame buffer memory assigned at phy:0x87100000, vir:0xf0000000, size=8192K
[ 1.416 fbdev bpp is :32
[ 1.416307@1] ---------------clear framebuffer0 memory
[ 1.437434@1] Frame buffer memory assigned at phy:0x87900000, vir:0xefe00000, size=1024K
[ 1.445426@1] init fbdev bpp is :24
[ 1.456826@0] osd probe ok
[ 1.456926@0] osd_ext_init
[ 1.457062@0] vout2_init_module enter
[ 1.460890@0] amlvideo-000: V4L2 device registered as video10
[ 1.466389@0] ionvideo-000: V4L2 device registered as video13
[ 1.471940@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
[ 1.480750@0] keys===========================================
[ 1.486139@0] keys_devno=f400000
[ 1.489401@0] securitykey: device aml_keys created
[ 1.494089@0] amlkeys=0
[ 1.496558@0] platform_driver_register--aml_keys_driver--------------------
[ 1.503732@0] setuart_ao pinmux use pinctrl subsystem
[ 1.508614@0] P_AO_RTI_PIN_MUX_REG:5860
[ 1.512403@0] start uart_ao_ttyS0:(irq = 122)
[ 1.516778@0] register uart_ao ok
[ 1.520201@0] start uart_a_ttyS1:(irq = 58)
[ 1.524199@0] register uart_a ok
[ 1.527597@0] start uart_d_ttyS4:(irq = 126)
[ 1.531657@0] register uart_d ok
[ 1.534923@0] dwc_otg: version 3.10a 21-DEC-2012
[ 1.59533@0] dwc_otg_driver_probe NOT match
[ 1.543761@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: f1108420, ctrl: f32c0000
[ 2.052SB (1) use clock source: XTAL input
[ 2.253400@0] Core Release: 2.94a
[ 2.253426@0] Setting default values for core params
[ 2.656198@0] Using Buffer DMA mode
[ 2.656222@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[ 2.658560@0] Working on port type = HOST
[ 2.662615@0] dwc_tg lm1: DWC OTG Controler
[ 2.666935@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
[ 2.673596@0] dwc_otg lm1: irq 63, io mem 0x00000000
[ 2.678564@0] Init: Port Power? op_state=1
[ 2.682598@0] Init1: Power Port (0)
[ 2.686559@0] hub 1-0:1.0: USB hu found
[ 2.689988@0] hub 1-0:1.0: 1 port detected
[ 2.694251@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: f1108400, ctrl: f3240000
[ 2.885204@0] Indeed it is in host mode hprt0 = 00021501
[ 2.912835@1] Core Release: 2.94a
[ 2.912858@1] Setting default values for core params
[ 3.065190@0] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.066245@0] Indeed it is in host mode hprt0 = 00001101
[ 3.2658080] hub 1-1:1.0: USB hub found
[ 3.265894@0] hub 1-1:1.0: 4 ports detected
[ 3.315043@1] Using Buffer DMA mode
[ 3.315066@1] OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.321308@1] Current port type: SLAVETG
[ 3.325110@1] dwc_otg lm0: DWC OTG Controller
[ 3.329406@1] dwc_otg lm0: new USB bus registered, assigned bus number 2
[ 3.336090@1] dwc_otg lm0: irq 62, io mem 0x00000000
[ 3.341345@1] hub 2-0:1.0: USB hub found
[ 3.344926@1] hub 2-0:1.0: 1 port detected
[ 3.349118@1] Dedicated Tx FIFOs mode
[ 3.3ing timer detect id change, eea73000
[ 3.357781@1] ethernet_driver probe!
[ 3.361153@1] Please config savepowermode.
3.365260@1] Please config reset_pin_enable.
[ 3.369624@1] Please config reset_delay.
[ 3.373474@1] Please config reset_pin.
[ 3.377228@1] ethernetinit(dbg[c08eb9b4]=1)
[ 3.381402@1] ethernet base addr is f3610000
[ 3.385655@1] write mac add to:eeba3188: da 83 79 61 7f ce |..ya.|
[ 3.393877@1] libphy: AMLMAC MII Bus: probed
[ 3.396149@1] eth0: PHY ID 0007c0f1 at 1 IRQ -1 (0:01) active
[ 3.401971@1] Amlogic A/V streaming port init
[ 3.407092@1] init vdec memsource -1979711488->-1946157057
[ 3.411746@1] regist mpeg12 codec profile
[ 3.415717@1] regist mpeg4 codec profile
[ 3.419565@1] amvdec_vc1 module init
[ 3.423153@1] regist vc1 codec profile
[ 3.426878@1] amvdec_h264 module init
[ 3.430547@1] regist h264 codec profile
[ 3.434352@1] regist mjpeg codec profile
[ 3.438240@1] amvdec_real module init
[ 3.441906@1] regist real codec profile
[ 3.446413@1] efuse================================
[ 3.451596@1] efuse: device efuse created
[ 3.455563@1] efuse--------------------------------------------
[ 3.461402@1] SARADC Driver init.
[ 3464789@1] __saradc_probe__
[ 3.465293@0] HOST mode
[ 3.495234@0] Init: Port Power? op_state=1
[ 3.495262@0] Init1: Power Port (0)
[ 3.497161@0] set usb port power on (board gpio 104)!
[ 3.545263@0] usb 1-1.4: new high-speed USB device number 3 using dwc_otg
[ 3.6radc calibration: ref_val = 516
[ 3.615305@1] saradc calibration: ref_nominal = 512
[ 3.619022@1] saradc calibration: coef = 4169
[ 3.62322@1] Remote Driver
[ 3.626220@1] Remote platform_data g_remote_base=f3100480
[ 3.631835@1] input: aml_keypad as /devices/platform/meson-remote/input/input0
[ 3.639057@1] Remote date_valye======0,status == 8915d80
[ 3.644044@1] remote config major:241
[ 3.647906@1] hysical address:0xaebc6000
[ 3.651795@1] ADC Keypad Driver init.
[ 3.655488@1] ==kp_probe==
[ 3.658110@1] chan #4 used for ADC key
[ 3.661815@1] menu key(139) registed.
[ 3.665475@1] vol- key(114) registed.
[ 3.669107@1] vol+ key(115) registed.
[ 3.672752@1] back key(158) registed.
[ 3.676405@1] home key(102) registed.
[ 3.680161@1] input: adc_keypad as /devices/platform/adc_keypad.3/input/input1
[ 3.687380@1] adc keypad register input device completed.
[ 3.692720@1] adc keypad major:240
[ 3.696335@1] Meson KeyInput init
[ 3.699561@1] Key 116 registed.
[ 3.702718@1] input as /devices/platform/key_input.4/input/input2
[ 3.709748@1] Meson KeyInput register RTC interrupt
[ 3.714348@1] Meson KeyInput major=238
[ 3.718359@1] ==touch_ts_init==
[ 3.721432@1] ==ft5x0x_ts_init==
[ 3.724601@1] ==goodix_ts_init==
[ 3.727827@1] ==gsl_ts_init==
[ 3.730754@1] i2c-core: driver [gslx680] using legacy suspend method
[ 3.743323@1] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
[ 3.749771@1] i2c-core: dri using legacy suspend method
[ 3.756045@1] i2c-core: driver [ct36x] using legacy resume method
[ 3.761984@1] VTL ct36x TouchScreen driver End.
[ 3.766632@1] i2c-core: driver [lis3dh_acc] using legacy suspend method
[ 3.773093@1] i2c-core: driver [lis3dh_acc] using legacy resume method
[ 3.779652@1] i2c-core: driver [bma222] using legacy suspend method
[ 3.785984@1] i2c-core: driver [bma222] using legacy resume method
[ 3.792056@1] i2c-core: driver [dmard06] using legacy suspend method
[ 3.798360@1] i2c-co[dmard06] using legacy resume method
[ 3.804676@1] i2c-core: driver [dmard10] using legacy suspend method
[ 3.805208@0] Indeed it is in host mode hprt0 = 00021501
[ 3.816370@1] i2c-core: driver [dmard10] using legacy resume method
[ 3.822508@1] stk831x_init
[ 3.825205@1] mxc622x accelerometer driver: init
[ 3.829791@1] i2c-core: driver [mxc622x] using legacy suspend method
[ 3.836119@1] i2c-core: driver [mxc622x] using legacy resume method
[ 3.842416@1] i2c-core: driver [elan_epl6814] using legacy suspend method
[ 3.849263@1] i2c-core: driver [elan_epl6814] using legacy resume method
[ 3.855845@1] i2c-core: driver [LTR501] using legacy suspend method
[ 3.862063@1] i2c-core: driver [LTR501] using legacy resume method
[ 3.868309@1] spi_nor_init
[ 3.870995@1] amlogic_spi_nor_probe:
[ 3.874480@1] amlogic_spi->state_name:default
[ 3.878995@1] AMLOGIC_SPINOR cc000000.spi: master is unqueued, this isdeprecated
[ 3.886419@1] spi_nor_probe
[ 3.889146@1] check_storage_device : spi boot_device_flag : -1
[ 3.894961@1] spi_nor_probe 609 boot_device_flag -1 : do not init spi
[ 3.901401@1] spi_nor: probe o apollospi:32766 failed with error -12
[ 3.907940@1] amlogic_spi_nor_probe over
[ 3.911783@1] mmc driver version: 1.05, 2014-01-16: sdhc eMMC run at 8bit@50MHz ok
[8@1] host->base f1108c20
[ 3.922595@1] pdata->caps 7
[ 3.925355@1] pdata->caps2 0
[ 3.928207@1] get property: port, value:0x00000001
[ 3.934715@1] get property: ocr_avail, value:0x00200000
[ 3.941361@1] get property: f_min, value:0x000493e0
[ 3.947744@1] get property: f_max, value:0x02faf080
[ 3.954246@1] get property: f_max_w, value:0x02faf080
[ 3.960762@1] get property: max_req_size, value:0x00020000
[ 3.967398@1] get property: irq_in, value:0x00000005
[ 3.973776@1] get property: irq_out, value:0x00000006
[ 3.980295@1] get property: power_level, value:0x00000000
[ 3.985194@0] usb 2-1: new high-speed USB device number 2 using dwc_otg
[ 3.985513@0] Indeed it is in host mode hprt0 = 00001101
[ 3.998820@1] get property: gpio_cd, str:CARD_6
[ 4.004678@1] get property: gpio_power, str:CARD_8
[ 4.010673@1] get property: pinname, str:sd
[ 4.016318@1] get property: card_type, value:0x00000005
[ 4.022818@1] get property: gpio_dat3, str:CARD_3
[ 4.028960@1] normal card in
[ 4.06 mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 4.595196@0] [aml_sdio_probe] aml_sdio_probe() succss!
[ 4.595332@0] [dsp]DSP start addr 0xc5000000
[ 4.599160@0] [dsp]register dsp to char divece232)
[ 4.615196@0] aml_rtc_init...
[ 4.616059@0] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
[ 4.619045@1] sd: new high speed SDHC card at address aaaa, clock 50000000, 4-bit-bus-width
[ 4.619355@0] [AXP]call axp_battery_init, ret = 0
[ 4.619688@0] pltform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 4.619757@0] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 4.619814@0] platform reg-20-cs-lo4: Driver reg-20-cs-lo4 requests probe deferral
[ 4.619871@0] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 4.619949@0] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 4.620014@0] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 4.620063@0] [AML_PMU]callaml_pmu_battery_init, ret = 0
[ 4.620101@0] [RN5T618]call rn5t618_battery_init, ret = 0
[ 4.690059@1] mmcblk0: sd:aaaa SU08G 7.40 GiB
[ 4.690085@0] wifi_power ps 24
[ 4.690089@0] wifi_dev_probe : there is no wifi_power_on_pin2 setup in DTS file!
[ 4.690349@0] amlogic rfkill init
[ 4.707649@0] usb-storage 2-1:1.0: USB Mass Storage dted
[ 4.715505@0] usbcore: registered new interface driver snd-usb-audio
[ 4.715713@1] scsi0 : sb-storage 2-1:1.0
[ 4.725383@1] mmcblk0: p1 p2
[ 4.726246@0] enter dummy_codec_audio_probe
[ 4.726355@0] soc-audio soc-audio: ASoC: machine AML-DUMMY-CODEC should use snd_soc_register_card()
[ 4.741524@0] rtd ee816810
[ 4.744034@0] cpu_dai eeb87a00
[ 4.747219@0] codec_dai eeb87900
[ 4.750989@0] aml-pcm 0:playback preallocate_dma_buffer: area=efd97000, addr=ad9c0000, size=131072
[ 4.760640@0] iec958 0: preallocate dma buffer start=eff01000, size=80000
[ 4.766997@0] aml-pcm 1:capture preallocate_dma_buffer: area=efdb9000, addr=adb80000, size=65536
[ 4.774958@0] soc-audio soc-audio: dummy_codec <-> aml-dai0 mapping ok
[ 4.782344@0] =dummy_codec_devdummy_codec_audio init done
[ 4.788069@0] GACT probability NOT on
[ 4.791526@0] Mirror/redirect action on
[ 4.795370@0] u32 classifier
[ 4.798189@0] Actions configured
[ 4.801751@0] Netfilter messages via NTLINK v0.30.
[ 4.806694@0] nf_conntrack version 0.5.0 (14038 buckets, 56152 max)
[ 4.813334@0] ctnetlink v0.93: registering with nfnetlink.
[ 4.818435@0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.825500@0] NF_TPROXY: Copyright (c) 2006-2007 BalaB
[ 4.831802@0] xt_time: kernel timezone is -0000
[ 4.836258@0] ip_tables:(C) 2000-2006 Netfilter Core Team
[ 4.841548@0] arp_tables: (C) 2002 David S. Miller
[ 4.846267@0] TCP: cubic registere50058@0] NET: Registered protocol f 4.854974@0] mip6: Mobile IPv6
[ 4.857486@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.863109@0] sit: IPv6 over IPv4 tunneling driver
[ 4.868588@0] NET: Registered protocol family 17
[ 4.872339@0] NET: Registered protocol family 15
[ 4.877076@0] Bridge firewalling registered
[ 4.881261@0] Bluetooth: RFCOMM TTY layer initialized
[ 4.886216@0] Bluetooth: RFCOMM socket layer initialized
[ 4.891428@0] Bluetooth: RFCOMM ver 1.11
[ 4.895349@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.900787@0] Bluetooth: BNEP filters: protocol multicast
[ 4.906218@0] Bluetooth: BNEP socet layer initialized
[ 4.911297@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.917398@0] Bluetooth: HIDP socket layer initialized
[ 4.922506@0] NET: Registered protocol fam 4.927481@0] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 4.934920@0] Registering SWP/SWPB emulation handler
[ 4.939889@0] enter meson_pm_init
[ 4.943371@0] enter meson_pm_probe!
[ 4.946655@0] meson_pm_probe 4.950772@0] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 4.957942@0] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 4.965618@0] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe 4.973302@0] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 4.981249@0] platform reg-20-cs-uck3: Driver reg-20-cs-buck3 requests probe deferral
[ 4.989132@0] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 4.997336@0] file system registered
[ 5.001504@0] android_usb gadget: Mass Storage Funtion, version: 2009/09/11
[ 5.007801@0] adroid_usb gadget: Number of LUNs=1
[ 5.012512@0] lun0: LUN: removable file: (no medium)
[ 5.017oid_usb gadget: android_usb ready
[ 5.022818@0] aml_rtc rtc.0: setting system clock to 1970-01-01 00:11:22 UTC (682)
[ 5.030030@0] ### dt-test ### No testcase data in device tree; not running tests
[ 5.037472@0] don't find match init-data
[ 5.041382@0] cpu freq limited to 1200000000
[ 5.045565@0] ------------[ cut here ]------------
[ 5.050357@0] WARNING: at kernel/smp.c:382 smp_call_function_many+0x84/0x2c4()
[ 5.057542@0] Modules linked in:
[ 5.060758@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.10 #4
[ 5.066941@0] [<c0014b18>] (unwind_backtrace+0x0/0xf8) from [<c0011c20>] (show_stack+0x10/0x14)
[ 5.075610@0] [<c0011c20>] (show_stack+0x10/0x14) from [<c002a058>] (warn_slowpath_common+0x4c/0x6c)
[ 5.084719@0] [<c002a058>] (warn_slowpath_common+0x4c/0x6c) from [<c002a094>] (warn_slowpath_null+0x1c/0x24)
[ 5.094526@0] [<c002a094>] (warn_slowpath_null+0x1c/0x24) from [<c00701b8>] (smp_call_function_many+0x84/0x2c4)
[ 5.104595@0] [<c00701b8>] (smp_call_function_many+0x84/0x2c4) from [<c0070584>] (smp_call_function+0x34/0x64)
[ 5.114576@0] [<c0070584>] (smp_call_function+0x34/0x64) from [<c001b4d8>] (clk_set_rae_a9+0x94/0xd4)
[ 5.123863@0] [<c001b4d8>] (clk_set_rate_a9+0x94/0xd4) from [<c001b8a4> (meson_clk_set_rate+0xa0/0x184)
[ 5.133324@0] [<c001b8a4>] (meson_clk_set_rate+0xa0/0x184) from [<c001ba2c>] (clk_set_rate+0xa4/0xc0)
[ 5.142536@0] [<c001ba2c>] (clk_set_rate+0xa4/0xc0) from [<c03b8738>] (meson_cpufreq_target_lockedisra.4+0x108/0x224)
[ 5.153206@0] [<c03b8738>] (meson_cpufreq_target_locked.isra.4+0x108/0x224) from [<c03b8878>] (meson_cpufreq_target+0x24/0x3c)
[ 5.164581@0] [<c03b8878>] (meson_cpufreq_target+0x24/0x3c) from [<c0323a14>] (__cpufreq_driver_target+0x50/0x74)
[ 5.174822@0] [<c0323a14>] (__cpufreq_driver_target+0x50/0x74) from [<c0329568>] (dbs_check_cpu+0x20c/0x220)
[ 5.184625@0] [<c0329568>] (dbs_check_cpu+0x20c/0x220) from [<c0329e68>] (cpufreq_governor_dbs+0x888/0x8dc)
[ 5.194345@0] [<c0329e68>] (cpufreq_governor_dbs+0x888/0x8dc) from [<c0323bcc] (__cpufreq_governor+0x70/0xf0)
[ 5.204327@0] [<c0323bcc>] (__cpufreq_govern0) from [<c0323e6c>] (__cpufreq_set_policy+0x1b0/0x1d0)
[ 5.214310@0] [<c0323e6c>] (__cpufreq_set_policy+0x1b0/0x1d0) from [<c032475c>] (cpufreq_dd_dev_interface+0x208/0x254)
[ 5.225073@0] [<c032475c>] (cpufreq_add_dev_interface+0x208/0x254) from [<c0324ae0>] (cpufreq_add_dev+0x338/0x44c)
[ 5.235407@0] [<c0324ae0>] (cpufreq_add_dev+0x338/0x44c) from [<c025e874>] (subsys_interface_register+0x80/0xc4
[ 5.245560@0] [<c025e874>] (subsys_interface_register+0x80/0xc4) from [<c03250cc>] (cpufreq_register_driver+0xa0/0x198)
[ 5.256326@0] [<c03250cc>] (cpufreq_register_driver+0xa0/0x198) from [<c08935fc>] (meson_pufreq_probe+0x200/0x278)
[ 5.266740@0] [<c08935fc>] (meson_cpufreq_probe+0x200/0x278) from [<c02608cc>] (platform_drv_probe+0x14/0x18)
[ 5.276633@0] [<c02608cc>] (platform_drv_probe+0x14/0x18) from [<c025f6f8>] (driver_probe_device+0xbc/0x1f8)
[ 5.286440@0] [<c025f6f8>] (driver_probe_device+0xbc/0x1f8) from [<c025f89c>] (__driver_attach+0x68/0x8c)
[ 5.295988@0] [<c025f89c>] (__driver_attach+0x68/0x8c) from [<c025de8c>] (bus_for_each_dev+0x4c/0x8c)
[ 5.305190@0] [<c025de8c>] (bus_for_each_dev+0x4c/0x8c) from [<c025ee88>] (bus_add_driver+0xcc/0x234)
[ 5.314389@0] [<c025ee88>] (bus_add_driver+0xcc/0x234) from [<c02fde8>] (driver_register+0xa0/0x13c)
[ 5.323592@0] [<c025fde8>] (driver_register+0xa0/0x13c) from [<c0260b70>] (platform_driver_probe+0x18/0x9c)
[ 5.333315@0] [<c0260b70>] (platform_driver_probe+0x18/0x9c) from [<c0008554>] (do_one_initcall+0x94/0x144)
[ 5.343038@0] [<c0008554>] (do_one_initcall+0x94/0x144) from [<c0878b64>] (kernel_init_freeable+0xfc/0x1c4)
[ 5.352759@0] [<c0878b64>] (kernel_init_freeable+0xfc/0x1c4) from [<c060e83c>] (kernel_init+0x8/0xe4)
[ 5.361960@0] [<c060e83c>] (kernel_init+0x8/0xe4) from [<c000e198>] (ret_from_fork+0x14/0x3c)
[ 5.370458@0] ---[ end trace 6912f41d320a9073 ]---
[ 5.375231@0] ------------[ cut here ]------------
[ 5.380010@0] WARNING: at kernel/sm.c:244 smp_call_function_single+0x98/0x1c0()
[ 5.387382@0] Modules linked in:
[ 5.390597@0] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.10 #4
[ 5.397719@0] [<c0014b18>] (unwind_backtrace+0x0/0xf8) from [<c0011c20>] (show_stack+0x10/0x14)
[ 5.406400@0] [<c0011c20>] (show_stack+0x10/0x14) from [<c002a058>] (warn_slowpath_common+0x4c/0x6c)
[ 5.415513@0] [<c002a058>] (warn_slowpath_common+0x4c/0x6c) from [<c002a094>] (warn_slowpath_null+0x1c/0x24)
[ 5.425321@0] [<c002a094>] (warn_slowpath_null+0x1c/0x24) from [<c007000c>] (smp_call_funtion_single+0x98/0x1c0)
[ 5.435564@0] [<c007000c>] (smp_call_function_single+0x98/0x1c0) from [<c0070584>] (smp_call_function+0x34/0x64)
[ 5.445717@0] [<c0070584>] (smp_call_function+0x34/0x64) from [<c001b4d8>] (clk_set_rate_a9+0x94/0xd4)
[ 5.455005@0 [<c001b4d8>] (clk_set_rate_a9+0x94/0xd4) from [<c001b8a4>] (meson_clk_set_rate+0xa0/0x184)
[ 5.464466@0] [<c001b8a4>] (meson_clk_set_rate+0xa0/0x184) from [<c001ba2c>] te+0xa4/0xc0)
[ 5.473671@0] [<c001ba2c>] (clk_set_rat+0xa4/0xc0) from [<c03b8738>] (meson_cpufreq_target_locked.isra.4+0x08/0x224)
[ 5.484346@0] [<c03b8738>] (meson_cpufreq_target_locked.isra.4+0x108/0x224) from [<c03b8878>] (meson_cpufreq_target+0x24/0x3c)
[ 5.495718@0] [<c03b8878>] (meson_cpufreq_target+0x24/0x3c) from [<c0323a14>] (__cpufreq_driver_target+0x50/0x74)
[ 5.505959@0] [<c0323a14] (__cpufreq_driver_target+0x50/0x74) from [<c0329568>] (dbs_check_cpu+0x20c/0x220)
[ 5.515766@0] [<c0329568>] (dbs_check_cpu+0x20c/0x220) from [<c0329e68>] (cpufreq_governor_dbs+0x888/0x8dc)
[ 5.525488@0] [<c0329e68>] (cpufreq_governor_dbs+0x888/0x8dc) from [<c0323bcc>] (__cpufeq_governor+0x70/0xf0)
[ 5.535470@0] [<c0323bcc>] (__cpufreq_governor+0x70/0xf0) from [<c0323e6c>] (__cpufreq_set_policy+0x1b0/0x1d0)
[ 5.545452@0] [<c0323e6c>] (__cpufreq_set_policy+0x1b0/0x1d0) from [<c032475c>] (cpufreq_add_dev_interface+0x208/0x254)
[ 5.556215@0] [<c032475c>] (cpufreq_add_dev_interface+0x208/0x254) from [<c0324ae0>] (cpufreq_add_dev+0x338/0x44c)
[ 5.566545@0] [<c0324ae0>] (cpufreq_add_dev+0x338/0x44c) from [<c025e874>] (subsys_interface_register+0x80/0xc4)
[ 5.576700@0] [<c025e874>] (subsys_interface_register+0x80/0xc4) from [<c03250cc>] (cpufreq_register_driver+0xa0/0x198)
[ 5.5874250cc>] (cpuer_driver+0xa0/0x198) from [<c08935fc>] (meson_cpufreq_probe+0x200/0x278)
[ 5.597879@0] [<c08935fc>] (meson_cpufreq_probe+x200/0x278) from [<c02608cc>] (platform_drv_probe+0x14/0x18)
[ 5.607774@0] [<c02608cc>] (platform_drv_probe+0x14/0x18) from [<c025f6f8>] (driver_probe_device+0xbc/0x1f8)
[ 5.617582@0] [<c025f6f8>] (driver_probe_device+0xbc/0x1f8) from [<c025f89c>] (__driver_attach+0x68/0x8c)
[ 5.627130@0] [<c025f89c>] (__driver_attach+0x68/0x8c) from [<c025de8c>] (bus_for_each_dev+0x4c/0x8c)
[ 5.636330@0] [<c025de8c>] (bus_for_each_dev+0x4c/0x8c) from [<c025ee88>] (bus_add_driver+0xcc/0x234)
[ 5.645531@0] [<c025ee88>] (bs_add_driver+0xcc/0x234) from [<c025fde8>] (driver_register+0xa0/0x13c)
[ 5.654733@0] [<c025fde8>] (driver_register+0xa0/0x13c) from [<c0260b70>] (platform_driver_probe+0x18/0x9c)
[ 5.664454@0] [<c0260b70>] (platform_driver_probe+0x18/0x9c) from [<c0008554>] (do_one_initcall+0x94/0x144)
[ 5.674176@0] [<c0008554>] (do_one_initcall+0x94/0x144) from [<c0878b64>] (kernel_init_freeable+0xfc/0x1c4)
[ 5.683897@0] [<c0878b64>] (kernel_init_freeable+0xfc/0x1c4) from [<c06e83c>] (kernel_init+0x8/0xe4)
[ 5.693099@0] [<c060e83c>] (kernelinit+0x8/0xe4) from [<c000e198>] (ret_from_fork+0x14/0x3c)
[ 5.701600@0] ---[ end trace 6912f41d320a[ 5.706772@0] cpu freq limited to 1200000000
[ 5.711128@0] platform reg-20-cs-ldo2: Driver reg-20-cs-ldo2 requests probe deferral
[ 5.718571@1] <<-GTP-INFO->> GP driver installing...
[ 5.718580@0] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 5.718623@0] platform reg-20-cs-ldo4: Driver reg-20-cs-ldo4 requests probe deferral
[ 5.718661@0]platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 5.718708@0] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 requests probe deferral
[ 5.718746@0] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 5.763411@1] hdmitx: cec: CEC init
[ 5.766330@1] scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2
[ 5.774891@0] platfcs-ldo2: Drics-ldo2 requests probe deferral
[ 5.775402@1] input: cec_input as /devices/virtual/input/input3
[ 5.775605@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[ 5.775606@1] ALSA device list:
[ 5.775610@1] #0: AML-5.804790@0] platform reg-20-cs-ldo3: Driver reg-20-cs-ldo3 requests probe deferral
[ 5.806911@0] platform reg-2-cs-ldo4: Driver reg-2-cs-ldo4 requests probe deferral
[ 5.814515@0] platform reg-20-cs-buck2: Driver reg-20-cs-buck2 requests probe deferral
[ 5.822363@1] sd 0:0:05687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 5.822395@0] platform reg-20-cs-buck3: Driver reg-20-cs-buck3 request probe deferral
[ 5.822436@0] platform reg-20-cs-ldoio0: Driver reg-20-cs-ldoio0 requests probe deferral
[ 5.846329@1] [sda] Write Protect is off
[ 5.851115@1] sd 0:0:0:0: [sda] No Caching mode page present
[ 5.85562@1] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5864195@1] sd 0:0:0:0: [sda] No Caching mode page present
[ 5.868469@1] sd 0:0 Assuming drive cache: write through
[ 5.885175@1] Changing uart_ao_ttyS0: baud from 0 to115200
[ 5.995191@0] cpu freq limited to 1200000000
[ 6.033829@1] sda: sda1
[ 6.035103@1] sd 0:0:0:0: [sda] No Caching mode pae present
[ 6.036392@1] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.042617@1] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.064968@1] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.067268@1] VFS: Mounted root (ext4 filesystem) on device 8:1.
[ 6.102108@1] devtmpfs: mounted
[ 6.102366@1] Freeing unused kernel memory: 204K (c0878000 - c08ab000)
[ 6.345500@0] ssystemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ+SECCOMP -APPARMOR)
[ 6.35361
Welcome to Arch Linux ARM!

[ 6.376655@0] systemd[1]: Set hostname to <alarm>.
[ 6.608309@1] sytemd[1]: Cannot add dependency job for unit display-manager.service,ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 6. Expecting device dev-ttyS0.device...
[ 6.635353@0] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.637965@0] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.645444@0] systemd[1� Expecting device sys-subsystem-net-devices-eth0.device...
[ [ OK ] Reached target Remote File Systems.
[ 6.695286@0] systemd[1]: Reached target Remote Fil Systems.
[ 6.695529@0] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.703782@0] systemd[1]: Started Dispatch Password Requests to Console Dire OK ] Reached target Paths.
[ 6.735269@0] systemd[1]: Reached target Pathw[ OK ] Reached target Encrypted Volumes.
[ 6.755270@0] systemd[1]: Reached target Encrypted Volumes.
[ 6.755465@0] systemd[1]: Starting Arbitrary[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ 6.785294@0] systemd[1]: Set up automount Arbitrary Executable File Formats File System Au[ OK ] Reached target Swap.
[ 6.805255@0] systemd[1]: Reached targe[ OK ] Created slice Root Slice.
[ 6.85273@0] systemd[1]: Created slice Root Slice.
[ 6.825376@[ OK ] Listening on Device-mapper event daemon FIFOs.
[ 6.845292@0] systemd[1]: Litening on Device-mapper event daemon FIFOs.
[ 6.846417@0] s[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 6.875273@0] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ [ OK ] Listening on Delayed Shutdown Socket.
[ 6.895285@0] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.89[ OK ] Listening on LVM2 metadata daemon socket.
[ 6.915262@0] systemd[1]: Listening on LVM2 metadata daemon socket.
[ OK ] Created slice User and Session Slice.
[ 6.935281@0] systemd[1]: Created slice User and Session Slice.
[[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket. udev Control Socket.
[ 6.975258@0] systemd[1]: Listening on udev Kernel Socket[ OK ] Listening on Journal Socket.
[ 6.995307@0] systemd[1]: Listening on Journal Soc[ OK ] Created slice System Slice.
[ 7.015256@0] systemd[1]: Created slice System Slice.
[ 7.015440@0] systemd[1]: Mounted Huge Pages File System.
[ 7.4 Starting udev Coldplug all Device...
[ 7.049686@1] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.059527@1] systemd[1]: Started Load Kernel Modules.
[ 7.05 Mounting FUSE Control File System...
[ 7.097893@1] systemd[1]: Starting Create list Starting Create list of required static device nodes...rrent kernel...
[ 7 Starting A Variables...
[ 7.137474@1�[ OK ] Created slice system-netctl\2difplugd.slice.
[ 7.155392@1] systemd[1]: Created slice system-netctl\x2difplugd.slice.
[ 7[ OK ] Created slice system-getty.slice.
[ 7.175585@1] systemd[1]: Created slice system-getty.slice.
[ 7.175814D[ OK ] Created slice system-serial\x2dgetty.slice.
[ 7.195345@1] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ ! Starting Setup Virtual Console...
[ 7. Mounting Debug File System...
[ 7.23 Mounting Coniguration File System..
[ 7.257195@0] systemd[1]: Mounted POSIX Message Queue File System.
Starting Journal Service...
[ OK ] Started Journal Service.
[ 7.295[ OK ] Reached target Slices.
Mounting Temporary Directory...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted Configuration File System.
[ OK ] Mounted Debug File System.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Temporry Directory.
[ OK ] Started Creae list of required static device nodes ...current kernel.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Setup Virtual Console.
[ 7.495315@0] cpu freq limited to 1200000000
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started udev Coldplug all Devices.
Starting Load/Save Random Seed...
Starting Create Static Device Nodes in /dev...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ 7.764777@0] systemd-udevd[106]: starting version 212
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Create Volatile Files and Directories...
[ OK ] Started udev Kernel Device Manager.
[ 7.876519@1] systemd-journald[95]: Received request to flush runtime journal from PID 1
[ 7.895582@0] cpu freq limited to 1200000000
[ 7.995282@1] cpu freq limited to 1200000000
[ 8.174708@1]systemd-journald[95]: File /var/log/journal/bef254e7fd904a3faaed5abbedb6262d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Started Trigger Flushig of Journal to Persistent Storage.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about Syhutdown...
[ OK ] Found device/dev/ttyS0.
[ OK ] Reached target Sound Card.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting OpenSSH Daemon...
[ OK ] Started OpenSSH Daemon.
Starting Entropy Harvesting Daemon...
Starting Network Time Service...
Starting Permit User Sessons...
Login Servic Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
[ 9.188209@0] Unable to handle kernel NULL pointer dereference at virtual add60
[ 9.190865@0] pgd = ed71c000
[ 9.193700@0] [00000060] *pgd=ad6fa831, *pte=00000000, *ppte=00000000
[ 9.200135@0] Internal error: Oops: 17 [#1] PREEMPT SMP ARM
[ 9.205les linked in:
[ 9.208891@0] CPU: 0 PID: 116 Comm: systemd-udevd Tainted: G W 3.10.10 #4
[ 9.216526@0] task: ed62b000 ti: ed718000 task.ti: ed718000
[ 9.222093@0] PC is at dev_ethtool+0x1b8/0x1f5c
[ 9.226595@0] LR is at 0x3
[ 9.229286@0] pc : [<c0496538>] lr : [<00000003>] psr: 800b0013
[ 9.229286@0] sp : ed719e38 ip : 0000001c fp : ed718000
[ 9.241089@0] r10: 00000000 r9 : ed718000 r8 : 00000000
[ 9.246471@0] r7 : c0904900 r6 : ee9ab800 r5 : ed718000 r4 : bed2a81c
[ 9.253154@0]000 r2 : 00000000 r1 : bed2a820 r0 : 00000000
[ 9.259839@0] Flags: Nzcv IRQs on FIQs on Mode VC_32 ISA ARM Segment user
[ 9.267129@0] Control: 10c5387d Table: ad71c04a DAC: 00000015
[ 9.273031@0]
630@0] 64b8 c0496534 c0496520 c0496534 c0496534 c0496534 c0496534 c0496520 c0496520
[ 9.285963@0] 64d8 c0496520 c0496520 c0496520 c0496520 c0496534 c0496534 c0496520 c0496534
[ 9.294296@0] 64f8 c0496520 c0496534 c0496520 c0496520 c0496520 c0496520 c0496534 c0496520
[ 9.302629@0] 6518 c0496520 c0496534 e5970024 e3a0100c ebee76f9 e3500000 0a000760 e59630e4
[ 9.310961@0] 6538 e5933060 e3530000 1a00004a e59d7014 e1c685d0 e2473001 e3530044 979ff103
[ 9.319294@0] 6558 ea000049 c0496690 c04966e8 c0496778 c0496790 c0496904 c049698c c0496a1c
[ 9.327627@0] 6578 c0496a40 c0496be4 c0496c0c c0496c9c c0496cf0 c0496684 c0496ea0 c0496eb8
[ 9.335960@0] 6598 c0496ed0 c0496f68 c0496ff8 c049707c c0497c3c c0497cac c0497c3c c0497cac
[ 9.344294@0]
[ 9.344294@0] SP: 0xed719db8:
[ 9.348893@0] 9db8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.357226@0] 9dd8 c0496538 800b0013 ffffffff ed719e24 00000000 c000dc98 00000000 bed2a820
[ 9.365558@0] 9df8 00000000 00000000 bed2a81c ed718000 ee9ab800 c0904900 00000000 ed718000
[ 9.373892@0] 9e18 00000000 ed718000 0000001c ed719e38 00000003 c0496538 800b0013 ffffffff
[ 9.382224@] 9e38 00000004 ee811018 00000004 c02574d4 00000000 00000003 0090c000 c00bfbbc
[ 9.390557@0] 9e58 ed5c9e00 00000001 00000008 c09061d4 400b0013 00000001 00000003 00000000
[ 9.398890@0] 9e78 ee811000 00000000 ed719eac c004e7c4 00000000 00000001 00000074 00008946
[ 9.407223@0] 9e98 c0904900 bed2a7fc ed719ec0 00000000 ed718000 00000000 ed718000 c04a4a68
[ 9.415556@0]
[ 9.415556@0] FP: 0xed717f80:
[ 9.420156@0]0000 00000000 ed717f88 ed717f88 ed717f90 ed717f90 00000000 00000000
[ 9.42849@0] 7fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.436822@0] 7fc0 fbffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff effff7ff
[ 9.445154@0] 7fe0 ffdfffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 9.453487@0] 8000 00000000 00000001 00000000 ed62b000 c08ccd48 00000000 00000015 ed44da40
[ 9.461820@0] 8020 00000000 c08c0fb8 ed62b000 c11b6940 ed718000 eebcbc00 ed719c7c ed719c28
[ 9.470153@0] 8040 c061d294 00000000 00000000 00000000 00000000 00000000 01000000 00000000
[ 9.478485@0] 8060 b6fc94c0 0000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.486819@0]
[ 9.486819@0] R5: 0xed717f80:
[ 9.491419@0] 7f80 00000000 00000000 ed717f88 ed717f88 ed717f90 ed717f90 00000000 00000000
[ 9.499751@0] 7fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.508084@0] 7fc0 fbffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff effff7ff
[ 9.516417@0] 7fe0 ffdfffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 9.524749@0] 8000 0000000000000001 00000000 ed62b000 c08ccd48 00000000 00000015 ed44da40
[ 9.533082@0] 8020 00000000 c08c0fb8 ed62b000 c11b6940 ed718000 eebcbc00 ed719c7c ed719c28
[ 9.541415@0] 8040 c061d294 00000000 00000000 00000000 00000000 00000000 01000000 00000000
[ 9.549748@0] 8060 b6fc94c0 00000000 00000000 00000000 00000000 00000000 00000000 00009.558082@0]
[ 9.558082@0] R6: 0xee9ab780:
[ 9.56681@0] b780 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.571014@0] b7a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.579347@0] b7c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.587680@0] b7e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.596013@0] b800 30687465 00000000 00000000 00000000 00000000 ee8cb720 00000000 00000000
[ 9.604345@0] b820 00000000 f3610000 00000028 00000006 e14830 ee9ab838 ee9ab838
[ 9.612678@0] b840 ee9ab840 ee9ab840 ee9ab848 ee9ab848 40004008 00000000 40004800 00000000
[ 9.621011@0] b860 40004800 00000000 00000020 00000000 00000001 00000000 00000002 00000002
[ 9.629344@0]
[ 9.629344@0] R7: 0xc0904880:
[ 9.633944@0] 4880 c090c93c c09061cc 00000001 00000000 c0904890 c0904890 00000000 00000000
[ 9.642277@0] 48a0 0000080 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.650610@0] 48c0 0000000d 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.658942@0] 48e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.667275@0] 4900 0000001 00000001 0002000 c0905324 c0905324 00000000 00000000 00000000
[ 9.675608@0] 4920 00000000 c08cdec8 f0000878 ee80d480 ee80d500 c060dfa0 c08000
[ 9.683941@0] 4940 00000001 00000002 00000000 c08d2ae4 c090d8fc c0904934 00000000 00000000
[ 9.692274@0] 4960 ee8516ec ee8c8400 ee8cbc00 ee814830 ed41e030 ee8cb400 ee8cb800 00000005
[ 9.700607@0]
[ 9.700607@0] R9: 0xed717f80:
[ 9.705207@0] 7f80 00000000 00000000 ed717f88 ed717f88 ed717f90 ed717f90 00000000 00000000
[ 9.713540@0] 7fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.721873@0] 7fc0 fbffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff effff7ff
[ 9.730205@0] 7fe0 ffdfffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 9.738538@0] 8000 00000000 00000001 00000000 ed62b000 c08ccd48 0000000 00000015 ed44da40
[ 9.746871@0] 8020 00000000 c08c0fb8 ed62b000 c11b6940 ed718000 eebcbc00 ed719c7c ed719c28
[ 9.755204@0] 8040 c061d294 00000000 00000000 00000000 00000000 00000000 01000000 00000000
[ 9.763536@0] 8060 b6fc94c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.771872@0] Process systemd-udevd (pid: 116, stacxed718238)
[ 9.778556@0] Stack: (0xed719e38 to 0xed71000)
[ 9.783069@0] 9e20: 00000004ee811018
[ 9.791404@0] 9e40: 00000004 c02574d4 00000000 00000003 0090c000 c00bfbbc ed5c9e00 00000001
[ 9.799736@0] 9e60: 00000008 c09061d4 400b0013 00000001 00000003 00000000 ee811000 00000000
[ 9.808069@0]9e80: ed719eac c004e7c4 00000000 00000001 00000074 00008946 c0904900 bed2a7fc
[ 9.816402@0] 9ea0: ed719ec0 00000000 ed718000 00000000 ed718000 c04000 00000000
[ 9.824735@0] 9ec0: 30687465 00000000 00000000 00000000 bed2a81c 00000000 00000000 00000000
[ 9.833067@0] 9ee0: 00000000 00000000 ed530c00 00008946 00000000 ed530c00 ed718000 ee6b6aa0
[ 9.841401@0] 9f00: bed2a7fc c00d3b1c 00040af8 ffffffff 00000000 ffffffff 00000000 00000000
[ 9.849733@0] 9f20: ed719f50 00000001 00000001 ed999b00 ed088d00 c01d2fd4 ed719f50 00000000
[ 9.858066@0] 9f40: ee6b6aa0 c01d35f0 ee6b6c40 00080800 00000001 ee851610 ee718a18 00000000
[ 9.866399@0] 9f60: bed2a7fc 00008946 0000000ed718000 00000006 00000001 c00d3bb8
[ 9.874732@0] 9f80: ed530cc0 00000000 ed718000 00000000 00000006 0004cee8 00000036 c000e2a8
[ 9.883064@0]9fa0: 00000000 c000e100 00000000 00000006 00000006 00008946 bed2a7fc 00000000
[ 9.891397@0] 9fc0: 00000000 00000006 0004cee8 00000036 00047ffc 0003f8d8 000413d8 00000001
[ 9.899730@0] 9fe0: 0003dd7c bed2a7f4 000232a8 b6e7b88c 400b0010 00000006 f7ffffff ffffffff
[ 9.908080@0] [<c0496538>] (dev_ethtool+0x1b8/0x1f5c) from [<c04a4a68>] (dev_ioctl+0x64c/0x7e4)
[ 9.916752@0] [<c04a4a68>] (dev_ioctl+0x64c/0x7e4) from [<c00d3b1c>] (do_vfs_ioctl+0x570/0x5bc)
[ 9.925428@0] [<c00d3b1c>] (do_vfs_ioctl+0x570/0x5bc) from [<c00d3bb8>] (SyS_ioctl+0x50/0x78)
[ 9.933939@0] [<c00d3bb8>] (SyS_ioctl+0x50/0x78) from [<c000e100>] (ret_fast_syscall+0x0/0x30)
[ 9.942525@0] Code: ebee76f9 e3500000 0a000760 e59630e4 (e5933060)
[ 9.948999@0] ---[ end trace 6912f41d320a9075 ]---
[ 10.025646@1] ionvideo opn
[ 10.025885@1] ionvideo release
[ 10.028093@1] amlvideo openamlvideo close[ 11.295225@0] cpu freq limited to 120000000
[ 11.395182@1] cpu freq limited to 1200000000
[ 11.516511@0] config uart_ao_ttyS0:: Character length 8bits/char
[ OK ] Started Entropy Harvesting Daemon.
[ 11.547942@0] config uart_ao_ttyS0:: Character length 8bits/char
[ OK ] Started Network Time Service.
[ 11.577105@0] config uart_ao_ttyS0:: Character length 8its/char
[ OK ] Started Permit User Sessions.
[ 11.695276@1] cpu freq limited to 1200000000
[ 11.895265@0] cpu freq limited to 120000000[ 11.945732@0] config uart_ao_ttyS0:: Character length 8bits/char
Starting Getty on tty1...
[ 11.967958@0] config uart_ao_ttyS0:: Character length 8bits/char
[ OK ] Started Getty on tty1.
[ 12.005698@0] config uart_ao_ttyS0:: Character length 8bits/char
Starting Serial Getty on ttyS0...
[ 12.028005@0] config uart_ao_ttyS0:: Character length 8bits/char
[ OK ] Started Serial Getty on ttyS0.
[ 12.065654@0] config uart_aharacter length 8bits/char
[ OK ] Reached target Login Prompts.
[ 12.095211@1] cpu freq limited to[ 12.098337@0] config uart_ao_ttyS0:: Character length 8bits/char
[ OK ] Started Login Service.
[ 16.981256@1] config uart_ao_ttyS[ 16.984484@1] config uart_ao_ttyS0:: Character length 8bits/char
[ 17.5945fig uart_ao_ttyS0:: Character length 8bits/char
[ 17.618712@0] config uart_ao_ttyS0:: Character length 8bits/char

Arch Linux 3.10.10 (ttyS0)

alarm login: [ 19.945988@1] systemd-udevd[106]: worker [116] terminated by signal 11 (Segmentation fault)

Arch Linux 3.10.10 (ttyS0)

alarm login: root
[ 22.996043@1] config uart_ao_ttyS0:: Character length 8bits/char
[ 23.018763@1] config uart_ao_ttyS0:: Character length 8bits/char
[ 23.035402@1] config uart_ao_ttyS0:: Charactr length 8bits/char
Password:
Last login: Wed Dec 31 17:07:04 on ttyS0
[root@alarm ~]# uname -a
Linux alarm 3.10.10 #4 SMP PREEMPT Mon May 12 19:47:50 IDT 2014 armv7l GNU/Liux
[root@alarm ~]# cat /proc/cpuinfo
Processor : ARMv7 Pocessor rev 0 (v7l)
processor : 0
BogoMIPS : 238.71

processor : 1S : 239.37

Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : rchitecture: 7
CPU variant : 0x3
0xc09
CPU revision : 0

Hardware : Amlogic Meson6 platform
Revision : 0000
Serial : 0000000000000000
')

[dhead666]

Got network up using an usb adapter (usbnet0).
I'm seening allot of usb related errors when transfering files over network so loging over ssh isn't much a good idea yet.

Probably only next week I'll continue to give this attention again.

[dhead666]

F***ing unbelievable !!!

Sorry for shouting but I needed it.
Someone leaked out Amlogic's kernel 3.10.33 and eth0 is working.

Now the fun begins ... need to package all of Amlogic misc libs and see if I can find a libMali.so that is not armel.