Overclock PogoPlug V4 and Mobile

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Re: Overclock PogoPlug V4 and Mobile

Postby JoeyAlarm » Sat Jan 09, 2016 11:15 pm

A topic so good I had to register :mrgreen:

I've got a fresh Pogoplug v4 Mobile and can confirm, 2.7K resistor yielded 996.14 BogoMIPS.

What a cool mod Sergeanter, thank you ;)
JoeyAlarm
 
Posts: 1
Joined: Sat Jan 09, 2016 10:58 pm

Re: Overclock PogoPlug V4 and Mobile

Postby shunjou » Sat Feb 06, 2016 12:46 am

Applied the OC to a mobile and a series 4 with identical results and both are running well. Transmission has noticeably more stable speeds using the same torrent. The top cover of the mobile is a lot harder to remove cleanly than the series 4 (all 4 clips broken vs 1).

Relevant dmesg lines (running stock pogo firmware):
$this->bbcode_second_pass_quote('BEFORE', 'C')alibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
cpufreq: High frequency: 800000KHz - Low frequency: 200000KHz

$this->bbcode_second_pass_quote('AFTER', 'C')alibrating delay loop... 999.42 BogoMIPS (lpj=4997120)
cpufreq: High frequency: 1000000KHz - Low frequency: 250000KHz


Here's a photo of the sloppy solder job I managed to do with the minimal low quality tools I had available.
shunjou
 
Posts: 1
Joined: Sat Feb 06, 2016 12:04 am

Previous

Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 6 guests