The alarm repository provides the fbturbo driver but I can't find any of the necessary kernel modules (mali, drm g2d).
The only thing I could find on it is this 3 year old thread: viewtopic.php?f=33&t=5979. And the git repos it links to are not maintained for 2-4 years.
I couldn't find anything on the AUR either. What am I missing?
[SOLVED] Graphics acceleration on the Raspberry Pi
15 posts
• Page 1 of 2 • 1, 2
[SOLVED] Graphics acceleration on the Raspberry Pi
by zumikashi » Tue Jan 12, 2016 3:56 am
Last edited by zumikashi on Sat Jan 23, 2016 8:39 pm, edited 1 time in total.
- zumikashi
- Posts: 8
- Joined: Tue Jan 12, 2016 2:51 am
Re: Graphics acceleration on the Raspberry Pi
by WarheadsSE » Tue Jan 12, 2016 2:49 pm
Pi 1 or Pi 2? They are different beasts.
- WarheadsSE
- Developer
- Posts: 6807
- Joined: Mon Oct 18, 2010 2:12 pm
Re: Graphics acceleration on the Raspberry Pi
by WarheadsSE » Tue Jan 12, 2016 3:58 pm
That should work with the Pi, from the armv6 repo. Can you get us some logs, from X or something?
- WarheadsSE
- Developer
- Posts: 6807
- Joined: Mon Oct 18, 2010 2:12 pm
Re: Graphics acceleration on the Raspberry Pi
by zumikashi » Wed Jan 13, 2016 2:47 am
Sure.
$this->bbcode_second_pass_code('', '[ 597.264]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 597.288] X Protocol Version 11, Revision 0
[ 597.303] Build Operating System: Linux 3.10.82-8-ARCH armv6l
[ 597.308] Current Operating System: Linux alarmpi 4.1.15-3-ARCH #1 Sat Jan 9 18:18:07 MST 2016 armv6l
[ 597.308] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0x100000e bcm2708.serial=0x85903d2c smsc95xx.macaddr=B8:27:EB:90:3D:2C bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 root=/dev/mmcblk0p2 rw rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 elevator=noop
[ 597.345] Build Date: 11 January 2016 03:43:16AM
[ 597.361]
[ 597.367] Current version of pixman: 0.32.8
[ 597.387] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 597.388] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 597.443] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 13 02:11:07 2016
[ 597.465] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 597.475] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 597.492] (==) No Layout section. Using the first Screen section.
[ 597.492] (==) No screen section available. Using defaults.
[ 597.492] (**) |-->Screen "Default Screen Section" (0)
[ 597.493] (**) | |-->Monitor "<default monitor>"
[ 597.494] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 597.495] (**) | |-->Device "Allwinner A10/A13 FBDEV"
[ 597.495] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 597.495] (==) Automatically adding devices
[ 597.495] (==) Automatically enabling devices
[ 597.496] (==) Automatically adding GPU devices
[ 597.496] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 597.496] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 597.497] Entry deleted from font path.
[ 597.497] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 597.497] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 597.497] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 597.498] (II) Loader magic: 0x1e0ed8
[ 597.498] (II) Module ABI versions:
[ 597.498] X.Org ANSI C Emulation: 0.4
[ 597.498] X.Org Video Driver: 20.0
[ 597.498] X.Org XInput driver : 22.1
[ 597.498] X.Org Server Extension : 9.0
[ 597.525] (++) using VT number 1
[ 597.526] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 597.574] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 597.576] (II) no primary bus or device found
[ 597.577] (II) LoadModule: "glx"
[ 597.587] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 597.820] (II) Module glx: vendor="X.Org Foundation"
[ 597.821] compiled for 1.18.0, module version = 1.0.0
[ 597.821] ABI class: X.Org Server Extension, version 9.0
[ 597.821] (==) AIGLX enabled
[ 597.821] (II) LoadModule: "fbturbo"
[ 597.823] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[ 597.832] (II) Module fbturbo: vendor="X.Org Foundation"
[ 597.832] compiled for 1.18.0, module version = 0.5.1
[ 597.832] Module class: X.Org Video Driver
[ 597.833] ABI class: X.Org Video Driver, version 20.0
[ 597.833] (II) FBTURBO: driver for framebuffer: fbturbo
[ 597.834] (WW) Falling back to old probe method for fbturbo
[ 597.834] (II) Loading sub module "fbdevhw"
[ 597.834] (II) LoadModule: "fbdevhw"
[ 597.835] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 597.837] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 597.843] compiled for 1.18.0, module version = 0.0.2
[ 597.843] ABI class: X.Org Video Driver, version 20.0
[ 597.844] (II) FBTURBO(0): using /dev/fb0
[ 597.844] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 597.845] (II) FBTURBO(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 597.845] (==) FBTURBO(0): Depth 16, (==) framebuffer bpp 16
[ 597.846] (==) FBTURBO(0): RGB weight 565
[ 597.846] (==) FBTURBO(0): Default visual is TrueColor
[ 597.846] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
[ 597.846] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 4050kB)
[ 597.847] (**) FBTURBO(0): Option "fbdev" "/dev/fb0"
[ 597.847] (**) FBTURBO(0): Option "SwapbuffersWait" "true"
[ 597.849] (II) FBTURBO(0): processor: ARM1176
[ 597.849] (II) FBTURBO(0): checking modes against framebuffer device...
[ 597.849] (II) FBTURBO(0): checking modes against monitor...
[ 597.858] (--) FBTURBO(0): Virtual size is 1920x1080 (pitch 1920)
[ 597.858] (**) FBTURBO(0): Built-in mode "current"
[ 597.858] (==) FBTURBO(0): DPI set to (96, 96)
[ 597.859] (II) Loading sub module "fb"
[ 597.859] (II) LoadModule: "fb"
[ 597.861] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 597.868] (II) Module fb: vendor="X.Org Foundation"
[ 597.868] compiled for 1.18.0, module version = 1.0.0
[ 597.869] ABI class: X.Org ANSI C Emulation, version 0.4
[ 597.889] (II) FBTURBO(0): using backing store heuristics
[ 597.935] (II) FBTURBO(0): can't load 'g2d_23' kernel module
[ 597.936] (II) FBTURBO(0): failed to enable the use of sunxi display controller
[ 597.936] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
[ 597.937] (II) FBTURBO(0): G2D hardware acceleration can't be enabled
[ 597.937] (II) FBTURBO(0): enabled fbdev copyarea acceleration
[ 597.937] (==) FBTURBO(0): Backing store enabled
[ 597.939] (==) FBTURBO(0): DPMS enabled
[ 597.939] (II) FBTURBO(0): failed to enable hardware cursor
[ 597.939] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
[ 597.949] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
[ 597.950] (==) RandR enabled
[ 598.165] (II) AIGLX: Screen 0 is not DRI2 capable
[ 598.165] (EE) AIGLX: reverting to software rendering
[ 600.386] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 600.403] (II) AIGLX: Loaded and initialized swrast
[ 600.403] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 607.142] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[ 607.142] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 607.142] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 607.143] (II) LoadModule: "libinput"
[ 607.144] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 607.179] (II) Module libinput: vendor="X.Org Foundation"
[ 607.179] compiled for 1.18.0, module version = 0.16.0
[ 607.179] Module class: X.Org XInput Driver
[ 607.180] ABI class: X.Org XInput driver, version 22.1
[ 607.252] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 11 paused 0
[ 607.252] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[ 607.252] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 607.253] (**) Option "Device" "/dev/input/event0"
[ 607.254] (**) Option "_source" "server/udev"
[ 607.274] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[ 607.275] (II) Device 'Logitech USB-PS/2 Optical Mouse' set to 800 DPI
[ 607.275] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[ 607.287] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C01E.0001/input/input0/event0"
[ 607.288] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 6)
[ 607.296] (**) Option "AccelerationScheme" "none"
[ 607.296] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[ 607.297] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 607.297] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 607.315] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[ 607.316] (II) Device 'Logitech USB-PS/2 Optical Mouse' set to 800 DPI
[ 607.316] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[ 607.335] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 607.336] (II) No input driver specified, ignoring this device.
[ 607.336] (II) This device may have been added with another device file.
[ 607.359] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[ 607.359] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 607.359] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 607.377] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 14 paused 0
[ 607.378] (II) Using input driver 'libinput' for 'USB Keyboard'
[ 607.378] (**) USB Keyboard: always reports core events
[ 607.378] (**) Option "Device" "/dev/input/event1"
[ 607.379] (**) Option "_source" "server/udev"
[ 607.393] (II) input device 'USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[ 607.393] (II) input device 'USB Keyboard', /dev/input/event1 is a keyboard
[ 607.394] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:04D9:0141.0002/input/input1/event1"
[ 607.394] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 7)
[ 607.419] (II) input device 'USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[ 607.420] (II) input device 'USB Keyboard', /dev/input/event1 is a keyboard
[ 607.442] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
[ 607.442] (**) USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 607.442] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 607.442] (**) USB Keyboard: Applying InputClass "libinput pointer catchall"
[ 607.443] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 607.461] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[ 607.461] (II) Using input driver 'libinput' for 'USB Keyboard'
[ 607.461] (**) USB Keyboard: always reports core events
[ 607.461] (**) Option "Device" "/dev/input/event2"
[ 607.462] (**) Option "_source" "server/udev"
[ 607.475] (II) input device 'USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 607.476] (II) input device 'USB Keyboard', /dev/input/event2 is a pointer caps
[ 607.476] (II) input device 'USB Keyboard', /dev/input/event2 is a keyboard
[ 607.477] (II) libinput: USB Keyboard: needs a virtual subdevice
[ 607.477] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:04D9:0141.0004/input/input2/event2"
[ 607.477] (II) XINPUT: Adding extended input device "USB Keyboard" (type: MOUSE, id 8)
[ 607.479] (**) Option "AccelerationScheme" "none"
[ 607.479] (**) USB Keyboard: (accel) selected scheme none/0
[ 607.479] (**) USB Keyboard: (accel) acceleration factor: 2.000
[ 607.483] (**) USB Keyboard: (accel) acceleration threshold: 4
[ 607.505] (II) input device 'USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 607.505] (II) input device 'USB Keyboard', /dev/input/event2 is a pointer caps
[ 607.505] (II) input device 'USB Keyboard', /dev/input/event2 is a keyboard
[ 607.525] (II) config/udev: Adding input device USB Keyboard (/dev/input/mouse1)
[ 607.526] (II) No input driver specified, ignoring this device.
[ 607.526] (II) This device may have been added with another device file.
[ 607.691] (**) USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 607.692] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 607.692] (**) USB Keyboard: Applying InputClass "libinput pointer catchall"
[ 607.692] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 607.692] (II) systemd-logind: returning pre-existing fd for /dev/input/event2 13:66
[ 607.693] (II) Using input driver 'libinput' for 'USB Keyboard'
[ 607.693] (**) USB Keyboard: always reports core events
[ 607.693] (**) Option "Device" "/dev/input/event2"
[ 607.694] (**) Option "_source" "_driver/libinput"
[ 607.694] (II) libinput: USB Keyboard: is a virtual subdevice
[ 607.695] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:04D9:0141.0004/input/input2/event2"
[ 607.695] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 9)
')
$this->bbcode_second_pass_code('', '[alarm@alarmpi log]$ lsmod
Module Size Used by
evdev 9470 3
bcm2835_rng 1983 0
bcm2835_gpiomem 3375 0
uio_pdrv_genirq 3133 0
uio 8942 1 uio_pdrv_genirq
sch_fq_codel 7487 2
snd_bcm2835 20606 0
snd_pcm 85093 1 snd_bcm2835
snd_timer 19437 1 snd_pcm
snd 61459 3 snd_bcm2835,snd_timer,snd_pcm
bcm2708_rng 1068 0
rng_core 7821 2 bcm2835_rng,bcm2708_rng
ip_tables 11686 0
x_tables 16630 1 ip_tables
ipv6 332731 20
')
$this->bbcode_second_pass_code('', '[alarm@alarmpi log]$ pacman -Q
acl 2.2.52-2
alsa-lib 1.1.0-1
atk 2.18.0-1
attr 2.4.47-1
avahi 0.6.32rc-2
awesome 3.5.6-2
bash 4.3.042-4
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.21-1
ca-certificates-utils 20150402-1
cairo 1.14.6-1
cdparanoia 10.2-5
compositeproto 0.4.2-3
coreutils 8.24-1
cracklib 2.9.4-1
cryptsetup 1.7.0-1
curl 7.46.0-1
damageproto 1.2.1-3
db 5.3.28-3
dbus 1.10.6-1
dbus-glib 0.104-1
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.138-1
dhcpcd 6.10.0-1
diffutils 3.3-2
dmxproto 2.3.1-3
dnssec-anchors 20150403-1
dri2proto 2.8-2
dri3proto 1.0-1
e2fsprogs 1.42.13-1
elfutils 0.164-2
expat 2.1.0-4
file 5.25-1
filesystem 2015.09-1
findutils 4.4.2-6
fixesproto 5.0-3
fontconfig 2.11.1-2
fontsproto 2.1.3-1
freetype2 2.6.2-1
gawk 4.1.3-1
gcc-libs 5.3.0-3
gdbm 1.11-1
gdk-pixbuf2 2.32.3-1
geoclue 0.12.99-2
gettext 0.19.6-2
giflib 5.1.1-1
glib2 2.46.2-2
glibc 2.22-3
glproto 1.4.17-1
gmp 6.1.0-3
gnupg 2.1.10-3
gnutls 3.4.7-2
gobject-introspection-runtime 1.46.0-1
gpgme 1.6.0-2
gpm 1.20.7-6
graphite 1:1.3.3-3
grep 2.22-1
groff 1.22.3-5
gst-plugins-base 1.6.2-1
gst-plugins-base-libs 1.6.2-1
gstreamer 1.6.2-1
gtk-update-icon-cache 3.18.6-2
gtk2 2.24.29-1
gtksourceview2 2.10.5-3
gzip 1.6-1
harfbuzz 1.1.2-3
haveged 1.9.1-2
hicolor-icon-theme 0.15-1
hunspell 1.3.3-3
hwids 20150717-1
iana-etc 20151016-1
icu 56.1-2
imlib2 1.4.7-1
inetutils 1.9.4-2.1
inputproto 2.3.1-1
iproute2 4.1.1-1
iptables 1.4.21-3
iputils 20140519.fad11dc-1
jasper 1.900.1-14
jfsutils 1.1.15-4
kbd 2.0.3-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 22-1
krb5 1.13.2-1
ldns 1.6.17-3
less 481-2
libaio 0.3.110-1
libarchive 3.1.2-8
libassuan 2.4.2-1
libcap 2.24-2
libcroco 0.6.11-1
libcups 2.1.2-3
libdaemon 0.14-3
libdatrie 0.2.9-1
libdbus 1.10.6-1
libdmx 1.1.3-1
libdrm 2.4.66-1
libedit 20150325_3.1-2
libelf 0.164-2
libepoxy 1.3.1-1
libevdev 1.4.6-1
libffi 3.2.1-1
libfontenc 1.1.3-1
libgcrypt 1.6.4-1
libgpg-error 1.21-1
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.32-1
libinput 1.1.4-1
libjpeg-turbo 1.4.2-2
libksba 1.3.3-1
libldap 2.4.43-1
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpciaccess 0.13.4-1
libpipeline 1.4.1-1
libpng 1.6.20-1
librsvg 2:2.40.11-1
libsasl 2.1.26-7
libseccomp 2.2.3-1
libsm 1.2.2-2
libssh2 1.6.0-1
libsystemd 228-3
libtasn1 4.7-1
libthai 0.1.22-1
libtheora 1.1.1-3
libtiff 4.0.6-2
libtirpc 1.0.1-2
libtxc_dxtn 1.0.1-6
libunistring 0.9.6-1
libunwind 1.1-3
libusb 1.0.20-1
libutempter 1.1.6-2
libutil-linux 2.27.1-1
libvisual 0.4.0-6
libvorbis 1.3.5-1
libwebp 0.5.0-1
libx11 1.6.3-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11.1-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.6-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxml2 2.9.3-1
libxmu 1.1.2-1
libxpm 3.5.11-1
libxrandr 1.5.0-1
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3.1
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
licenses 20140629-1
linux-api-headers 4.1.4-1
linux-firmware 20151207.bbe4917-1
linux-raspberrypi 4.1.15-3
llvm-libs 3.7.0-6
logrotate 3.9.1-1
lua 5.3.2-1
lua-lgi 0.9.0-1
lvm2 2.02.138-1
lz4 131-1
lzo 2.09-1
man-db 2.7.5-1
man-pages 4.04-1
mdadm 3.3.4-1
mesa 11.1.0-2
mesa-libgl 11.1.0-2
mlocate 0.26-5
mousepad 0.4.0-1
mpfr 3.1.3.p5-1
mtdev 1.1.5-1
nano 2.5.0-1
ncurses 6.0-4
net-tools 1.60.20130531git-1
netctl 1.11-1
nettle 3.1.1-1
npth 1.2-1
openresolv 3.7.2-1
openssh 7.1p1-1
openssl 1.0.2.e-1
orc 0.4.24-1
p11-kit 0.23.2-1
pacman 4.2.1-4
pacman-mirrorlist 20151228-1
pam 1.2.1-3
pambase 20130928-1
pango 1.38.1-1
pciutils 3.4.0-1
pcre 8.38-2
perl 5.22.1-1
pinentry 0.9.7-1
pixman 0.32.8-1
popt 1.16-7
presentproto 1.0-1
procps-ng 3.3.11-2
psmisc 22.21-3
qt5-base 5.5.1-8
qt5-declarative 5.5.1-8
qt5-location 5.5.1-8
qt5-script 5.5.1-8
qt5-sensors 5.5.1-8
qt5-webchannel 5.5.1-8
qt5-webkit 5.5.1-8
qt5-x11extras 5.5.1-8
qt5-xmlpatterns 5.5.1-8
qtchooser 53-2
qupzilla 1.8.9-2
randrproto 1.5.0-1
raspberrypi-firmware 20160109-1
raspberrypi-firmware-bootloader 20160109-1
raspberrypi-firmware-bootloader-x 20160109-1
raspberrypi-firmware-examples 20160109-1
raspberrypi-firmware-tools 20160109-1
readline 6.3.008-3
recordproto 1.14.2-2
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
s-nail 14.8.6-1
scrnsaverproto 1.2.2-2
sed 4.2.2-3
shadow 4.2.1-3
shared-mime-info 1.5-1
sqlite 3.9.2-1
startup-notification 0.12-4
sysfsutils 2.1.0-9
systemd 228-3
systemd-sysvcompat 228-3
tar 1.28-1
texinfo 6.0-1
thin-provisioning-tools 0.5.6-2
tzdata 2015g-1
usbutils 008-1
util-linux 2.27.1-1
vi 1:070224-2
videoproto 2.3.2-1
vim 7.4.1063-1
vim-runtime 7.4.1063-1
wayland 1.9.0-1
which 2.21-1
xbitmaps 1.1.1-3
xcb-proto 1.11-2
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xextproto 7.3.0-1
xf86-input-evdev 2.10.1-3
xf86-input-joystick 1.6.2-6
xf86-input-keyboard 1.8.1-2
xf86-input-libinput 0.16.0-1
xf86-input-mouse 1.9.1-2
xf86-input-synaptics 1.8.3-2
xf86-input-void 1.4.1-2
xf86-video-amdgpu 1.0.0-1
xf86-video-dummy 0.3.7-5
xf86-video-fbdev 0.4.4-5
xf86-video-fbturbo-git 199.f9a6ed7-1
xf86-video-vesa 2.3.4-2
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 4.3.0-1
xineramaproto 1.2.1-3
xkeyboard-config 2.16-1
xorg-bdftopcf 1.0.5-1
xorg-docs 1.7.1-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-100dpi 1.0.3-2
xorg-fonts-75dpi 1.0.3-2
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-4
xorg-iceauth 1.0.7-1
xorg-luit 1.1.1-2
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.18.0-4
xorg-server-common 1.18.0-4
xorg-server-devel 1.18.0-4
xorg-server-xdmx 1.18.0-4
xorg-server-xephyr 1.18.0-4
xorg-server-xnest 1.18.0-4
xorg-server-xvfb 1.18.0-4
xorg-server-xwayland 1.18.0-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-smproxy 1.0.6-1
xorg-util-macros 1.19.0-1
xorg-x11perf 1.6.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xcursorgen 1.0.6-1
xorg-xdpyinfo 1.3.2-1
xorg-xdriinfo 1.0.5-1
xorg-xev 1.2.2-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-3
xorg-xinput 1.6.2-1
xorg-xkbcomp 1.3.1-1
xorg-xkbevd 1.1.4-1
xorg-xkbutils 1.0.4-2
xorg-xkill 1.0.4-1
xorg-xlsatoms 1.1.2-1
xorg-xlsclients 1.1.3-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xpr 1.0.4-2
xorg-xprop 1.2.2-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-2
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xorg-xvinfo 1.1.3-1
xorg-xwd 1.0.6-1
xorg-xwininfo 1.1.3-1
xorg-xwud 1.0.4-2
xproto 7.0.28-1
xterm 322-1
xz 5.2.2-1
zlib 1.2.8-4
')
The packages I installed:
$this->bbcode_second_pass_code('', 'xorg
xorg-xinit
awesome
xf86-video-fbturbo-git
qupzilla
mlocate
vim
mousepad
xterm
')
Let me know if you need anything more.
$this->bbcode_second_pass_code('', '[ 597.264]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 597.288] X Protocol Version 11, Revision 0
[ 597.303] Build Operating System: Linux 3.10.82-8-ARCH armv6l
[ 597.308] Current Operating System: Linux alarmpi 4.1.15-3-ARCH #1 Sat Jan 9 18:18:07 MST 2016 armv6l
[ 597.308] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708.boardrev=0x100000e bcm2708.serial=0x85903d2c smsc95xx.macaddr=B8:27:EB:90:3D:2C bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 root=/dev/mmcblk0p2 rw rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 elevator=noop
[ 597.345] Build Date: 11 January 2016 03:43:16AM
[ 597.361]
[ 597.367] Current version of pixman: 0.32.8
[ 597.387] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 597.388] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 597.443] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 13 02:11:07 2016
[ 597.465] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 597.475] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 597.492] (==) No Layout section. Using the first Screen section.
[ 597.492] (==) No screen section available. Using defaults.
[ 597.492] (**) |-->Screen "Default Screen Section" (0)
[ 597.493] (**) | |-->Monitor "<default monitor>"
[ 597.494] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 597.495] (**) | |-->Device "Allwinner A10/A13 FBDEV"
[ 597.495] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 597.495] (==) Automatically adding devices
[ 597.495] (==) Automatically enabling devices
[ 597.496] (==) Automatically adding GPU devices
[ 597.496] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 597.496] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 597.497] Entry deleted from font path.
[ 597.497] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 597.497] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 597.497] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 597.498] (II) Loader magic: 0x1e0ed8
[ 597.498] (II) Module ABI versions:
[ 597.498] X.Org ANSI C Emulation: 0.4
[ 597.498] X.Org Video Driver: 20.0
[ 597.498] X.Org XInput driver : 22.1
[ 597.498] X.Org Server Extension : 9.0
[ 597.525] (++) using VT number 1
[ 597.526] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 597.574] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 597.576] (II) no primary bus or device found
[ 597.577] (II) LoadModule: "glx"
[ 597.587] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 597.820] (II) Module glx: vendor="X.Org Foundation"
[ 597.821] compiled for 1.18.0, module version = 1.0.0
[ 597.821] ABI class: X.Org Server Extension, version 9.0
[ 597.821] (==) AIGLX enabled
[ 597.821] (II) LoadModule: "fbturbo"
[ 597.823] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[ 597.832] (II) Module fbturbo: vendor="X.Org Foundation"
[ 597.832] compiled for 1.18.0, module version = 0.5.1
[ 597.832] Module class: X.Org Video Driver
[ 597.833] ABI class: X.Org Video Driver, version 20.0
[ 597.833] (II) FBTURBO: driver for framebuffer: fbturbo
[ 597.834] (WW) Falling back to old probe method for fbturbo
[ 597.834] (II) Loading sub module "fbdevhw"
[ 597.834] (II) LoadModule: "fbdevhw"
[ 597.835] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 597.837] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 597.843] compiled for 1.18.0, module version = 0.0.2
[ 597.843] ABI class: X.Org Video Driver, version 20.0
[ 597.844] (II) FBTURBO(0): using /dev/fb0
[ 597.844] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 597.845] (II) FBTURBO(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 597.845] (==) FBTURBO(0): Depth 16, (==) framebuffer bpp 16
[ 597.846] (==) FBTURBO(0): RGB weight 565
[ 597.846] (==) FBTURBO(0): Default visual is TrueColor
[ 597.846] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
[ 597.846] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 4050kB)
[ 597.847] (**) FBTURBO(0): Option "fbdev" "/dev/fb0"
[ 597.847] (**) FBTURBO(0): Option "SwapbuffersWait" "true"
[ 597.849] (II) FBTURBO(0): processor: ARM1176
[ 597.849] (II) FBTURBO(0): checking modes against framebuffer device...
[ 597.849] (II) FBTURBO(0): checking modes against monitor...
[ 597.858] (--) FBTURBO(0): Virtual size is 1920x1080 (pitch 1920)
[ 597.858] (**) FBTURBO(0): Built-in mode "current"
[ 597.858] (==) FBTURBO(0): DPI set to (96, 96)
[ 597.859] (II) Loading sub module "fb"
[ 597.859] (II) LoadModule: "fb"
[ 597.861] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 597.868] (II) Module fb: vendor="X.Org Foundation"
[ 597.868] compiled for 1.18.0, module version = 1.0.0
[ 597.869] ABI class: X.Org ANSI C Emulation, version 0.4
[ 597.889] (II) FBTURBO(0): using backing store heuristics
[ 597.935] (II) FBTURBO(0): can't load 'g2d_23' kernel module
[ 597.936] (II) FBTURBO(0): failed to enable the use of sunxi display controller
[ 597.936] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
[ 597.937] (II) FBTURBO(0): G2D hardware acceleration can't be enabled
[ 597.937] (II) FBTURBO(0): enabled fbdev copyarea acceleration
[ 597.937] (==) FBTURBO(0): Backing store enabled
[ 597.939] (==) FBTURBO(0): DPMS enabled
[ 597.939] (II) FBTURBO(0): failed to enable hardware cursor
[ 597.939] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
[ 597.949] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
[ 597.950] (==) RandR enabled
[ 598.165] (II) AIGLX: Screen 0 is not DRI2 capable
[ 598.165] (EE) AIGLX: reverting to software rendering
[ 600.386] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 600.403] (II) AIGLX: Loaded and initialized swrast
[ 600.403] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 607.142] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[ 607.142] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 607.142] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 607.143] (II) LoadModule: "libinput"
[ 607.144] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 607.179] (II) Module libinput: vendor="X.Org Foundation"
[ 607.179] compiled for 1.18.0, module version = 0.16.0
[ 607.179] Module class: X.Org XInput Driver
[ 607.180] ABI class: X.Org XInput driver, version 22.1
[ 607.252] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 11 paused 0
[ 607.252] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[ 607.252] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 607.253] (**) Option "Device" "/dev/input/event0"
[ 607.254] (**) Option "_source" "server/udev"
[ 607.274] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[ 607.275] (II) Device 'Logitech USB-PS/2 Optical Mouse' set to 800 DPI
[ 607.275] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[ 607.287] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C01E.0001/input/input0/event0"
[ 607.288] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 6)
[ 607.296] (**) Option "AccelerationScheme" "none"
[ 607.296] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[ 607.297] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 607.297] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 607.315] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is tagged by udev as: Mouse
[ 607.316] (II) Device 'Logitech USB-PS/2 Optical Mouse' set to 800 DPI
[ 607.316] (II) input device 'Logitech USB-PS/2 Optical Mouse', /dev/input/event0 is a pointer caps
[ 607.335] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 607.336] (II) No input driver specified, ignoring this device.
[ 607.336] (II) This device may have been added with another device file.
[ 607.359] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[ 607.359] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 607.359] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 607.377] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 14 paused 0
[ 607.378] (II) Using input driver 'libinput' for 'USB Keyboard'
[ 607.378] (**) USB Keyboard: always reports core events
[ 607.378] (**) Option "Device" "/dev/input/event1"
[ 607.379] (**) Option "_source" "server/udev"
[ 607.393] (II) input device 'USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[ 607.393] (II) input device 'USB Keyboard', /dev/input/event1 is a keyboard
[ 607.394] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:04D9:0141.0002/input/input1/event1"
[ 607.394] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 7)
[ 607.419] (II) input device 'USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[ 607.420] (II) input device 'USB Keyboard', /dev/input/event1 is a keyboard
[ 607.442] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
[ 607.442] (**) USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 607.442] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 607.442] (**) USB Keyboard: Applying InputClass "libinput pointer catchall"
[ 607.443] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 607.461] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[ 607.461] (II) Using input driver 'libinput' for 'USB Keyboard'
[ 607.461] (**) USB Keyboard: always reports core events
[ 607.461] (**) Option "Device" "/dev/input/event2"
[ 607.462] (**) Option "_source" "server/udev"
[ 607.475] (II) input device 'USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 607.476] (II) input device 'USB Keyboard', /dev/input/event2 is a pointer caps
[ 607.476] (II) input device 'USB Keyboard', /dev/input/event2 is a keyboard
[ 607.477] (II) libinput: USB Keyboard: needs a virtual subdevice
[ 607.477] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:04D9:0141.0004/input/input2/event2"
[ 607.477] (II) XINPUT: Adding extended input device "USB Keyboard" (type: MOUSE, id 8)
[ 607.479] (**) Option "AccelerationScheme" "none"
[ 607.479] (**) USB Keyboard: (accel) selected scheme none/0
[ 607.479] (**) USB Keyboard: (accel) acceleration factor: 2.000
[ 607.483] (**) USB Keyboard: (accel) acceleration threshold: 4
[ 607.505] (II) input device 'USB Keyboard', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 607.505] (II) input device 'USB Keyboard', /dev/input/event2 is a pointer caps
[ 607.505] (II) input device 'USB Keyboard', /dev/input/event2 is a keyboard
[ 607.525] (II) config/udev: Adding input device USB Keyboard (/dev/input/mouse1)
[ 607.526] (II) No input driver specified, ignoring this device.
[ 607.526] (II) This device may have been added with another device file.
[ 607.691] (**) USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 607.692] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 607.692] (**) USB Keyboard: Applying InputClass "libinput pointer catchall"
[ 607.692] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 607.692] (II) systemd-logind: returning pre-existing fd for /dev/input/event2 13:66
[ 607.693] (II) Using input driver 'libinput' for 'USB Keyboard'
[ 607.693] (**) USB Keyboard: always reports core events
[ 607.693] (**) Option "Device" "/dev/input/event2"
[ 607.694] (**) Option "_source" "_driver/libinput"
[ 607.694] (II) libinput: USB Keyboard: is a virtual subdevice
[ 607.695] (**) Option "config_info" "udev:/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:04D9:0141.0004/input/input2/event2"
[ 607.695] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 9)
')
$this->bbcode_second_pass_code('', '[alarm@alarmpi log]$ lsmod
Module Size Used by
evdev 9470 3
bcm2835_rng 1983 0
bcm2835_gpiomem 3375 0
uio_pdrv_genirq 3133 0
uio 8942 1 uio_pdrv_genirq
sch_fq_codel 7487 2
snd_bcm2835 20606 0
snd_pcm 85093 1 snd_bcm2835
snd_timer 19437 1 snd_pcm
snd 61459 3 snd_bcm2835,snd_timer,snd_pcm
bcm2708_rng 1068 0
rng_core 7821 2 bcm2835_rng,bcm2708_rng
ip_tables 11686 0
x_tables 16630 1 ip_tables
ipv6 332731 20
')
$this->bbcode_second_pass_code('', '[alarm@alarmpi log]$ pacman -Q
acl 2.2.52-2
alsa-lib 1.1.0-1
atk 2.18.0-1
attr 2.4.47-1
avahi 0.6.32rc-2
awesome 3.5.6-2
bash 4.3.042-4
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.21-1
ca-certificates-utils 20150402-1
cairo 1.14.6-1
cdparanoia 10.2-5
compositeproto 0.4.2-3
coreutils 8.24-1
cracklib 2.9.4-1
cryptsetup 1.7.0-1
curl 7.46.0-1
damageproto 1.2.1-3
db 5.3.28-3
dbus 1.10.6-1
dbus-glib 0.104-1
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.138-1
dhcpcd 6.10.0-1
diffutils 3.3-2
dmxproto 2.3.1-3
dnssec-anchors 20150403-1
dri2proto 2.8-2
dri3proto 1.0-1
e2fsprogs 1.42.13-1
elfutils 0.164-2
expat 2.1.0-4
file 5.25-1
filesystem 2015.09-1
findutils 4.4.2-6
fixesproto 5.0-3
fontconfig 2.11.1-2
fontsproto 2.1.3-1
freetype2 2.6.2-1
gawk 4.1.3-1
gcc-libs 5.3.0-3
gdbm 1.11-1
gdk-pixbuf2 2.32.3-1
geoclue 0.12.99-2
gettext 0.19.6-2
giflib 5.1.1-1
glib2 2.46.2-2
glibc 2.22-3
glproto 1.4.17-1
gmp 6.1.0-3
gnupg 2.1.10-3
gnutls 3.4.7-2
gobject-introspection-runtime 1.46.0-1
gpgme 1.6.0-2
gpm 1.20.7-6
graphite 1:1.3.3-3
grep 2.22-1
groff 1.22.3-5
gst-plugins-base 1.6.2-1
gst-plugins-base-libs 1.6.2-1
gstreamer 1.6.2-1
gtk-update-icon-cache 3.18.6-2
gtk2 2.24.29-1
gtksourceview2 2.10.5-3
gzip 1.6-1
harfbuzz 1.1.2-3
haveged 1.9.1-2
hicolor-icon-theme 0.15-1
hunspell 1.3.3-3
hwids 20150717-1
iana-etc 20151016-1
icu 56.1-2
imlib2 1.4.7-1
inetutils 1.9.4-2.1
inputproto 2.3.1-1
iproute2 4.1.1-1
iptables 1.4.21-3
iputils 20140519.fad11dc-1
jasper 1.900.1-14
jfsutils 1.1.15-4
kbd 2.0.3-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 22-1
krb5 1.13.2-1
ldns 1.6.17-3
less 481-2
libaio 0.3.110-1
libarchive 3.1.2-8
libassuan 2.4.2-1
libcap 2.24-2
libcroco 0.6.11-1
libcups 2.1.2-3
libdaemon 0.14-3
libdatrie 0.2.9-1
libdbus 1.10.6-1
libdmx 1.1.3-1
libdrm 2.4.66-1
libedit 20150325_3.1-2
libelf 0.164-2
libepoxy 1.3.1-1
libevdev 1.4.6-1
libffi 3.2.1-1
libfontenc 1.1.3-1
libgcrypt 1.6.4-1
libgpg-error 1.21-1
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.32-1
libinput 1.1.4-1
libjpeg-turbo 1.4.2-2
libksba 1.3.3-1
libldap 2.4.43-1
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpciaccess 0.13.4-1
libpipeline 1.4.1-1
libpng 1.6.20-1
librsvg 2:2.40.11-1
libsasl 2.1.26-7
libseccomp 2.2.3-1
libsm 1.2.2-2
libssh2 1.6.0-1
libsystemd 228-3
libtasn1 4.7-1
libthai 0.1.22-1
libtheora 1.1.1-3
libtiff 4.0.6-2
libtirpc 1.0.1-2
libtxc_dxtn 1.0.1-6
libunistring 0.9.6-1
libunwind 1.1-3
libusb 1.0.20-1
libutempter 1.1.6-2
libutil-linux 2.27.1-1
libvisual 0.4.0-6
libvorbis 1.3.5-1
libwebp 0.5.0-1
libx11 1.6.3-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11.1-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.6-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxml2 2.9.3-1
libxmu 1.1.2-1
libxpm 3.5.11-1
libxrandr 1.5.0-1
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3.1
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
licenses 20140629-1
linux-api-headers 4.1.4-1
linux-firmware 20151207.bbe4917-1
linux-raspberrypi 4.1.15-3
llvm-libs 3.7.0-6
logrotate 3.9.1-1
lua 5.3.2-1
lua-lgi 0.9.0-1
lvm2 2.02.138-1
lz4 131-1
lzo 2.09-1
man-db 2.7.5-1
man-pages 4.04-1
mdadm 3.3.4-1
mesa 11.1.0-2
mesa-libgl 11.1.0-2
mlocate 0.26-5
mousepad 0.4.0-1
mpfr 3.1.3.p5-1
mtdev 1.1.5-1
nano 2.5.0-1
ncurses 6.0-4
net-tools 1.60.20130531git-1
netctl 1.11-1
nettle 3.1.1-1
npth 1.2-1
openresolv 3.7.2-1
openssh 7.1p1-1
openssl 1.0.2.e-1
orc 0.4.24-1
p11-kit 0.23.2-1
pacman 4.2.1-4
pacman-mirrorlist 20151228-1
pam 1.2.1-3
pambase 20130928-1
pango 1.38.1-1
pciutils 3.4.0-1
pcre 8.38-2
perl 5.22.1-1
pinentry 0.9.7-1
pixman 0.32.8-1
popt 1.16-7
presentproto 1.0-1
procps-ng 3.3.11-2
psmisc 22.21-3
qt5-base 5.5.1-8
qt5-declarative 5.5.1-8
qt5-location 5.5.1-8
qt5-script 5.5.1-8
qt5-sensors 5.5.1-8
qt5-webchannel 5.5.1-8
qt5-webkit 5.5.1-8
qt5-x11extras 5.5.1-8
qt5-xmlpatterns 5.5.1-8
qtchooser 53-2
qupzilla 1.8.9-2
randrproto 1.5.0-1
raspberrypi-firmware 20160109-1
raspberrypi-firmware-bootloader 20160109-1
raspberrypi-firmware-bootloader-x 20160109-1
raspberrypi-firmware-examples 20160109-1
raspberrypi-firmware-tools 20160109-1
readline 6.3.008-3
recordproto 1.14.2-2
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
s-nail 14.8.6-1
scrnsaverproto 1.2.2-2
sed 4.2.2-3
shadow 4.2.1-3
shared-mime-info 1.5-1
sqlite 3.9.2-1
startup-notification 0.12-4
sysfsutils 2.1.0-9
systemd 228-3
systemd-sysvcompat 228-3
tar 1.28-1
texinfo 6.0-1
thin-provisioning-tools 0.5.6-2
tzdata 2015g-1
usbutils 008-1
util-linux 2.27.1-1
vi 1:070224-2
videoproto 2.3.2-1
vim 7.4.1063-1
vim-runtime 7.4.1063-1
wayland 1.9.0-1
which 2.21-1
xbitmaps 1.1.1-3
xcb-proto 1.11-2
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xextproto 7.3.0-1
xf86-input-evdev 2.10.1-3
xf86-input-joystick 1.6.2-6
xf86-input-keyboard 1.8.1-2
xf86-input-libinput 0.16.0-1
xf86-input-mouse 1.9.1-2
xf86-input-synaptics 1.8.3-2
xf86-input-void 1.4.1-2
xf86-video-amdgpu 1.0.0-1
xf86-video-dummy 0.3.7-5
xf86-video-fbdev 0.4.4-5
xf86-video-fbturbo-git 199.f9a6ed7-1
xf86-video-vesa 2.3.4-2
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 4.3.0-1
xineramaproto 1.2.1-3
xkeyboard-config 2.16-1
xorg-bdftopcf 1.0.5-1
xorg-docs 1.7.1-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-100dpi 1.0.3-2
xorg-fonts-75dpi 1.0.3-2
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-4
xorg-iceauth 1.0.7-1
xorg-luit 1.1.1-2
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.18.0-4
xorg-server-common 1.18.0-4
xorg-server-devel 1.18.0-4
xorg-server-xdmx 1.18.0-4
xorg-server-xephyr 1.18.0-4
xorg-server-xnest 1.18.0-4
xorg-server-xvfb 1.18.0-4
xorg-server-xwayland 1.18.0-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-smproxy 1.0.6-1
xorg-util-macros 1.19.0-1
xorg-x11perf 1.6.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xcursorgen 1.0.6-1
xorg-xdpyinfo 1.3.2-1
xorg-xdriinfo 1.0.5-1
xorg-xev 1.2.2-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-3
xorg-xinput 1.6.2-1
xorg-xkbcomp 1.3.1-1
xorg-xkbevd 1.1.4-1
xorg-xkbutils 1.0.4-2
xorg-xkill 1.0.4-1
xorg-xlsatoms 1.1.2-1
xorg-xlsclients 1.1.3-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xpr 1.0.4-2
xorg-xprop 1.2.2-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-2
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xorg-xvinfo 1.1.3-1
xorg-xwd 1.0.6-1
xorg-xwininfo 1.1.3-1
xorg-xwud 1.0.4-2
xproto 7.0.28-1
xterm 322-1
xz 5.2.2-1
zlib 1.2.8-4
')
The packages I installed:
$this->bbcode_second_pass_code('', 'xorg
xorg-xinit
awesome
xf86-video-fbturbo-git
qupzilla
mlocate
vim
mousepad
xterm
')
Let me know if you need anything more.
- zumikashi
- Posts: 8
- Joined: Tue Jan 12, 2016 2:51 am
Re: Graphics acceleration on the Raspberry Pi
by WarheadsSE » Wed Jan 13, 2016 4:38 pm
Something has gone wrong in that package, apparently as it is attempting to access the Mail from sunxi.
- WarheadsSE
- Developer
- Posts: 6807
- Joined: Mon Oct 18, 2010 2:12 pm
Re: Graphics acceleration on the Raspberry Pi
by zumikashi » Thu Jan 14, 2016 2:52 am
Do you have any idea what it could be? I tried recompiling it using https://github.com/ssvb/xf86-video-fbturbo and https://github.com/RPi-Distro/xf86-video-fbturbo. Both lead to the same outcome.
This is the PKGBUILD:
$this->bbcode_second_pass_code('', '
_pkgname=xf86-video-fbturbo
pkgname=${_pkgname}-git
pkgver=r197.e094e3c
pkgrel=2
pkgdesc="X.org framebuffer video driver"
arch=(armv6h)
license=('custom')
url="http://xorg.freedesktop.org/"
depends=('glibc')
makedepends=('xorg-server-devel' 'X-ABI-VIDEODRV_VERSION=20')
conflicts=('xorg-server<1.16' 'X-ABI-VIDEODRV_VERSION<20' 'X-ABI-VIDEODRV_VERSION>=21')
provides=('xf86-video-fbturbo')
groups=('xorg-drivers' 'xorg')
#source=("$pkgname::git+https://github.com/ssvb/xf86-video-fbturbo.git")
source=("$pkgname::git+https://github.com/RPi-Distro/xf86-video-fbturbo.git")
sha256sums=('SKIP')
pkgver() {
cd $pkgname
printf "r%s.%s" "$(git rev-list --count HEAD)" "$(git rev-parse --short HEAD)"
}
prepare() {
mkdir -p build
}
build() {
cd $pkgname
autoreconf -vi
./configure --prefix=/usr
make
}
package() {
cd $pkgname
make DESTDIR="${pkgdir}" install
install -m755 -d "${pkgdir}/etc/X11/xorg.conf.d"
install -m644 xorg.conf "${pkgdir}/etc/X11/xorg.conf.d/99-fbturbo.conf"
install -m755 -d "${pkgdir}/usr/share/licenses/${pkgname}"
install -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/"
}
')
This is the PKGBUILD:
$this->bbcode_second_pass_code('', '
_pkgname=xf86-video-fbturbo
pkgname=${_pkgname}-git
pkgver=r197.e094e3c
pkgrel=2
pkgdesc="X.org framebuffer video driver"
arch=(armv6h)
license=('custom')
url="http://xorg.freedesktop.org/"
depends=('glibc')
makedepends=('xorg-server-devel' 'X-ABI-VIDEODRV_VERSION=20')
conflicts=('xorg-server<1.16' 'X-ABI-VIDEODRV_VERSION<20' 'X-ABI-VIDEODRV_VERSION>=21')
provides=('xf86-video-fbturbo')
groups=('xorg-drivers' 'xorg')
#source=("$pkgname::git+https://github.com/ssvb/xf86-video-fbturbo.git")
source=("$pkgname::git+https://github.com/RPi-Distro/xf86-video-fbturbo.git")
sha256sums=('SKIP')
pkgver() {
cd $pkgname
printf "r%s.%s" "$(git rev-list --count HEAD)" "$(git rev-parse --short HEAD)"
}
prepare() {
mkdir -p build
}
build() {
cd $pkgname
autoreconf -vi
./configure --prefix=/usr
make
}
package() {
cd $pkgname
make DESTDIR="${pkgdir}" install
install -m755 -d "${pkgdir}/etc/X11/xorg.conf.d"
install -m644 xorg.conf "${pkgdir}/etc/X11/xorg.conf.d/99-fbturbo.conf"
install -m755 -d "${pkgdir}/usr/share/licenses/${pkgname}"
install -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/"
}
')
- zumikashi
- Posts: 8
- Joined: Tue Jan 12, 2016 2:51 am
Re: Graphics acceleration on the Raspberry Pi
by WarheadsSE » Thu Jan 14, 2016 6:00 pm
It is likely code execution path failing to properly operate and take the route for the broadcom.
I can't offer much more without digging into the code base.
I can't offer much more without digging into the code base.
- WarheadsSE
- Developer
- Posts: 6807
- Joined: Mon Oct 18, 2010 2:12 pm
Re: Graphics acceleration on the Raspberry Pi
by crinkelite » Sun Jan 17, 2016 6:01 pm
I'm having the same issue. Should i wait for a fix or try a different OS?
/EDIT
The video adapter is functioning as omxplayer is playing HD video correctly.
Maybe I'm having separate issue than the OP.
Xorg log https://ptpb.pw/-Mgu
lsmod https://ptpb.pw/OrOm
pacman -Q https://ptpb.pw/YS0u
/EDIT
The video adapter is functioning as omxplayer is playing HD video correctly.
Maybe I'm having separate issue than the OP.
Xorg log https://ptpb.pw/-Mgu
lsmod https://ptpb.pw/OrOm
pacman -Q https://ptpb.pw/YS0u
- crinkelite
- Posts: 1
- Joined: Sun Jan 17, 2016 5:56 pm
Re: Graphics acceleration on the Raspberry Pi
by zumikashi » Fri Jan 22, 2016 12:05 pm
Actually, the X server and window manager is starting, but there seems to be no graphics acceleration: everything is lagging a lot more than on a raspbian install (moving windows, etc) to the point that it's unusable. I see that I should probably have stated this more clearly in my initial post.
After trying raspbian again I noticed the same errors in the Xorg.log from fbturbo. So these can be ignored and just mean that there is no Mali GPU found. For some reason I thought the Pi 1 actually had a Mali GPU so these notices made me think fbturbo wasn't detecting the GPU properly.
However this still doesn't explain the terrible lag with the ALARM + Pi 1 combo in comparison to a standard raspbian image. What I did experience in raspbian was an almost comparable amount of lag when using the awesome window manager which I had also used on ALARM.
I'll do some more testing on ALARM this week and check if it's the same with openbox/LXDE and dwm.
On a relevant sidenote: has anyone tested the new VC4 driver yet? This will support X-wide 2D/3D graphics acceleration on the RPi 1 and 2 (like I wrongfully expected already to be available for the Pi) instead of only X window movement and OpenGLES applications that bypass X.
After trying raspbian again I noticed the same errors in the Xorg.log from fbturbo. So these can be ignored and just mean that there is no Mali GPU found. For some reason I thought the Pi 1 actually had a Mali GPU so these notices made me think fbturbo wasn't detecting the GPU properly.
However this still doesn't explain the terrible lag with the ALARM + Pi 1 combo in comparison to a standard raspbian image. What I did experience in raspbian was an almost comparable amount of lag when using the awesome window manager which I had also used on ALARM.
I'll do some more testing on ALARM this week and check if it's the same with openbox/LXDE and dwm.
On a relevant sidenote: has anyone tested the new VC4 driver yet? This will support X-wide 2D/3D graphics acceleration on the RPi 1 and 2 (like I wrongfully expected already to be available for the Pi) instead of only X window movement and OpenGLES applications that bypass X.
- zumikashi
- Posts: 8
- Joined: Tue Jan 12, 2016 2:51 am
15 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 5 guests