I had Jeffs Uboot loaded to my device and somehow it got corrupted.
So I tried reflashing with the original pogoplug software and a serial cable.
Well that didn't work, so I looked around this forum and the web and tried different things, none of which worked.
So I get back to the Marvell prompt and did a printenv.
The environment was all gunked up so I tried a resetenv, and of course that was unrecognized from the Marvell propmt.
So I started looking around fora way to clear the environment, and boy did I find it.
nand erase clean
So I issued that command.
Certainly cleaned the nand alright.
At that point I probably could have gone back to the original reflashing instructions and went from there,but I decided to reset first to start clean.
Now my Dockstar has no lights,cant ssh to it, or use the usb serial cable, nothing, it's a brick.
Posting here on the off chance that there's something I can do.
In the immortal words of Frank Zappa "If you don't know what you're doing with it, you probably shouldn't be going around doing stuff with it".
