Missing U-Boot Special Commands!

[Yong0320]

Hi guys,

Recently, I'm learning how to troubleshoot U-boot-based CPU, while the OS for the CPU is Win CE 6.0. I found out that the special commands for U-boot is missing due to the U-boot processor I have here is being customized. Is that possible that I can re-install or re-configure the U-boot's missing commands into the U-boot?

Regards and Thanks,
Yong0320

[summers]

Well as you are Win CE based, that isn't something this forum deals with. So rewriting uboot env variables from Win CE is off topic.

However if you have access to the boot, e.g. via a uart plugged onto the board. You can interrupt the uboot, then rewrite env variables, then saveenv. Commands can be found on the uboot site, its quite simple.

http://www.denx.de/wiki/view/DULG/UBootCommandLineInterface

[Yong0320]

Hi summers,
Sorry for asking the wrong question in this forum.
Thanks for your help.

[WarheadsSE]

$this->bbcode_second_pass_quote('', 's')pecial commands for U-boot is missing