Hi!
I've been enjoying my C2 running Arch Linux for a while now. Quite happy so far. I have a few PI 3's running Arch with full LUKS encryption and I wanted to experiment doing so with the C2 on the emmc module. I've tried variations of the procedures I use to build a LUKS-encrypt Arch PI from here and here but I can never get it to boot.
I'm trying to adapt the official Arch installation guide for the C2 into a FDE setup.
Instead of creating 1 partition with fdisk, I created 2, the first one with 1GB for the installation root filesystem and the second one for the luks partition. I boot as usual into the C2, add the encrypt hook to mkinitcpio.conf and create a new initramfs image. I also modify the boot.ini file to load the cryptdevice. Finally, after putting the emmc module on another computer and mounting both the first partition and the luks partition, I rsync the two and then I expect the C2 to at least ask me for a password at boot, but I then just get a black screen. The heartbeat LED is flashing so I assume it does get somewhere. My guess is that I'm missing a step after modifying the boot.ini and mkinitcpio.conf.
Any suggestions?