Hi forum.
After some trouble I got my TB S running with ALarm kernel. So I supposed to start un update, but there I got a stop. No wireless.
First discovery$this->bbcode_second_pass_code('', '# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 88:d7:f6:c2:f1:42 brd ff:ff:ff:ff:ff:ff')
I've tried to load the module$this->bbcode_second_pass_code('', '# modprobe r8723bs
[ 2827.606079] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[ 2827.619605] RTL8723BS: module init start
[ 2827.624396] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[ 2827.632418] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[ 2827.639892] RTL8723BS: module init ret =0
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 88:d7:f6:c2:f1:42 brd ff:ff:ff:ff:ff:ff
# lsmod |grep 8723
r8723bs 573440 0
cfg80211 294912 3 rt2x00lib,mac80211,r8723bs')
So for such difficulty I thought to use a WiFi dongle.
$this->bbcode_second_pass_code('', '# modprobe rt2800usb
[ 2480.931107] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2480.947173] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2480.958840] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2480.968504] cfg80211: failed to load regulatory.db
[ 2480.993613] usbcore: registered new interface driver rt2800usb
[root@alarm alarm]# ip link
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 88:d7:f6:c2:f1:42 brd ff:ff:ff:ff:ff:ff')
I think I should find another way to connect to internet. But even via ethernet I'm facing hard time. I presume the most cause is to renew the crda package and the certificates.