Short manual for installing archlinux on the ac100:
1. go to
http://ac100.grandou.net/installing_linux and read it. read it carefully! you need nvflash or ac100-toolkit, u can find it in wiki.
2. format your sd/usb/internal to ext3/4
3. unpack
http://archlinuxarm.org/os/ArchLinuxARM-tegra-latest.tar.gz to your new partition
4. unpack
http://avolver.ru/ac100/kernels/38.ogra-1.1/modules-ogra-2.6.38-1.1.tar.gz in to your rootfs partition(check path for modules- /lib/modules/2.6.38-blahbalah)
5. change rootfs mount point in your fstab (/dev/sdx for usb stick, /dev/mmcblk1px for sdcard and /dev/mmcblk0p7 for internal storage)
6. download property kernel from
http://avolver.ru/ac100/kernels/ (be sure that your kernel modules have same build number and date with your kernel)
7. start your ac100 in recovery mode with ctrl+esc+power (screen must be off, only power and wifi indicators must be on (not sure about wifi))
8. load bootloader: nvflash --bl where_u_put_your_fastboot.bin --sync
9. flash kernel in to your ac100: nvflash -r –download 6 your_kernel.img
10. restart your ac100
11. ?????
12. PROFIT!!!!
UPD:Preinstalled Archlinux
aviable:
It is include: kde4 workspace, lxde workspace, openbox, firefox8, chromium17, psi+, xchat, libreoffice3.4 koffice2.2, xbmc with hw accseleration, nvidia blob alpha(egl support), networkmanager, java7, a lot of games, full development env.
how to use:
-extract archive to usb-stick/sd-mmc-card/external hdd/internal storage (ext4-fs preferred) your home dir will be mounted in to mmcbl0p6 partition(1G)
-if u want swap ucan format mmcblk0p4 into swapfs after boot
-flash property kernel
from here with nvflash
-?????
-PROFIT!!!
for login use
user:user
root:password1