Dockstar won't boot into Arch after install.

[yazyazoo]

I have a Dockstar that I installed Arch following the instructions from the from here. http://archlinuxarm.org/platforms/armv5 ... e-dockstar

When I do the reboot at the end and try to use Putty again to SSH in it doesn't work.

My USB stick is next to ethernet port. I have tried 3 different USB sticks.

Any reason why it's not working?

[hydro]

Maybe a different IP was assigned by your router.

[yazyazoo]

Thanks for the input. I finally got it to work however I needed to change two lines in the wiki for it to work. I don't know if the wiki is old or just my Dockstar is a little different.

Here is what I changed and hopefully it helps someone else out who has the same problems.

in the wiki the line is:

mkdir /usb which should be mkdir /tmp/usb

and

cd /usb which should be cd /tmp/usb

once i changed those lines everything worked.

[hydro]

There is nothing wrong with the install guide, because there is no slash before usb.

[yazyazoo]

oh yeah that is probably it. Didn't notice that as I was doing it as I just cut and paste from the wiki as installing.