PogoPlug series 4
43 posts
• Page 3 of 5 • 1, 2, 3, 4, 5
Re: PogoPlug series 4
by kmihelich » Sat Jan 14, 2012 7:51 pm
Complete installation instructions are available now!
Arch Linux ARM exists and continues to grow through community support, please donate today!
- kmihelich
- Developer
- Posts: 1133
- Joined: Tue Jul 20, 2010 6:55 am
- Location: aka leming #archlinuxarm
Re: PogoPlug series 4
by kmihelich » Mon Jan 16, 2012 6:00 pm
Because support for MMC on this platform in U-Boot is not there, like I said in the release notes. Maybe later on I'll figure out how to fix it.
Arch Linux ARM exists and continues to grow through community support, please donate today!
- kmihelich
- Developer
- Posts: 1133
- Joined: Tue Jul 20, 2010 6:55 am
- Location: aka leming #archlinuxarm
Re: PogoPlug series 4
by archalien » Tue Jan 17, 2012 4:29 am
Im installed but not automounting any usb from usb3 slots or from sata slot....???
searching forums now, stickied aotumount for OXnas...??? hmmmm
searching forums now, stickied aotumount for OXnas...??? hmmmm
- archalien
- Posts: 8
- Joined: Sun Jan 08, 2012 9:13 am
Re: PogoPlug series 4
by kmihelich » Tue Jan 17, 2012 4:31 am
Install udev-automount.
Arch Linux ARM exists and continues to grow through community support, please donate today!
- kmihelich
- Developer
- Posts: 1133
- Joined: Tue Jul 20, 2010 6:55 am
- Location: aka leming #archlinuxarm
Re: PogoPlug series 4
by archalien » Tue Jan 17, 2012 5:56 am
$this->bbcode_second_pass_quote('kmihelich', 'I')nstall udev-automount.
Thanks 4 reply and help in irc!!!
I reverted to stock, tested all drives and ports on my.pogo - operating fine.
wiped os drive and re-installed clean.
post-install- updated pacman, changed root pw, installed udev-automount......
SD and SATA automount
USB3 full of fail.... (using usb2 and usb3 thumb drives formatted fat32)
What can I do to help anyone in a position to fix this issue? thx
- archalien
- Posts: 8
- Joined: Sun Jan 08, 2012 9:13 am
Re: PogoPlug series 4
by emkay » Tue Jan 17, 2012 7:34 am
The drives will not get auto mounted if they are attached at boot time of alarm. Just plug them in when alarm is already running or mount them by hand.
EmKay
EmKay
- emkay
- Posts: 12
- Joined: Wed Nov 30, 2011 10:45 pm
Re: PogoPlug series 4
by archalien » Wed Jan 18, 2012 5:33 pm
$this->bbcode_second_pass_quote('emkay', 'T')he drives will not get auto mounted if they are attached at boot time of alarm. Just plug them in when alarm is already running or mount them by hand.
EmKay
EmKay
Again thx for the reply, I am aware of the boot time mount situation and have tested that out already. I need to do a couple more tests to verify, but my initial observation is that the usb 3 ports are just not functioning properly. From a clean install all Ive done is change root pw update pacman and add automount. Being that everything works when reverted to stock would indicate an issue with ALARM? Ill try to manually mount it (have to refresh on steps for that) my concern is that the controller is not being intialized properly and the drives are not even being recognized by the driver or the OS, so even manual mount will not work.
- archalien
- Posts: 8
- Joined: Sun Jan 08, 2012 9:13 am