[SOLVED] Can't SSH into pogoplug

[yuugotserved]

I'm not sure exactly what happened, but now I cannot SSH into my pogoplug. I looked in my DHCP table and the address is 192.168.1.130 (which is what it has always been)

when i ping that, destination host is unreachable.

i ping the host name \\ALARM and it gives me an address of 184.106.15.239 which is completely out of my range..

i have unplugged the ac adapter and replugged it hoping it would work, but not this time.

what have I done wrong? thanks in advance.

[moonman]

is there another dhcp server on your nework? What device do you have and front led tells you?

[yuugotserved]

$this->bbcode_second_pass_quote('moonman', 'i')s there another dhcp server on your nework? What device do you have and front led tells you?

[WarheadsSE]

This is a B02? Then it is an oxnas (V3, et all) and if the LED does the blinking green, then stops on orange, you're staring a network bring up failure.

[yuugotserved]

$this->bbcode_second_pass_quote('WarheadsSE', 'T')his is a B02? Then it is an oxnas (V3, et all) and if the LED does the blinking green, then stops on orange, you're staring a network bring up failure.

$this->bbcode_second_pass_quote('yuugotserved', '')$this->bbcode_second_pass_quote('WarheadsSE', 'T')his is a B02? Then it is an oxnas (V3, et all) and if the LED does the blinking green, then stops on orange, you're staring a network bring up failure.

[yuugotserved]

could it be bricked?

i restarted my modem, router, and switched and repinged hostname alarm and ip address but still nothing..

how would i "reset" the pogoplug and start fresh if i wanted to?

[moonman]

All those topics are about different kinds of devices if you notices. If you want to reset you will probably need to reinstall everything from scratch. But just before you do that, check your rootfs partition for errors.

[yuugotserved]

$this->bbcode_second_pass_quote('moonman', 'A')ll those topics are about different kinds of devices if you notices. If you want to reset you will probably need to reinstall everything from scratch. But just before you do that, check your rootfs partition for errors.

[moonman]

It is probably a good idea to convert to ext3 if you want to avoid things like this.