by karog » Sat Dec 22, 2012 12:49 am
You pull the clear cover towards the back. It can be a little tough the first time. And you have to bend the cable organizer back piece down to get the clear cover off. Once the clear cover is about 1/2 way off, you can angle it some towards the top. I push with my thumbs against the back of the pogo while pulling with my fingers on the clear cover using both hands, one on each side.
Then you pry the case apart gently. I use a tiny screwdriver. Looking at the pogo from the back where the power, net, and 3 usb connectors are, it is the left side that comes off. You want to pull the left side away to the left as straight as possible. Or if the pogo is lying down on its right side, straight up.There is a seam running the length of the top and the bottom and around the left edge of the back from top center to bottom center. Pry it apart all along the top and around the back left edge.
That is the best I can describe it in words. You can probably find some images on line of an open pogo.
Last edited by
karog on Sat Dec 22, 2012 1:00 am, edited 1 time in total.