Can't boot latest Cubox image

[ykmag]

There seems to be a problem with lastes cubox build. I have followed the instructions and copied boot.scr.mmcblk0p1 to boot.scr

From the boot:
$this->bbcode_second_pass_code('', '===> Executing ext2load mmc 0:1 0x02000000 /boot.scr
Loading file "/boot.scr" from mmc device 0:1 (mmcda1)
** File not found /boot.scr
===> Executing fatload mmc 0:1 0x02000000 /boot.scr
reading /boot.scr

** Unable to read "/boot.scr" from mmc 0:1 **
===> Executing ext2load mmc 0:1 0x02000000 /boot/boot.scr
Loading file "/boot/boot.scr" from mmc device 0:1 (mmcda1)
456 bytes read
## Executing script at 02000000
======== Setting bootargs ========
======== Loading kernel ========
Loading file "/boot/uImage" from mmc device 0:1 (mmcda1)
undefined instruction
pc : [<f0000002>] lr : [<00635d9c>]
sp : 005ff570 ip : 00000001 fp : a9a8cfec
r10: 04ea6a73 r9 : c8d3566e r8 : 005fffcc
r7 : 1d3509e8 r6 : a9a8b5d4 r5 : 0e94d52f r4 : fd7d5fb5
r3 : ffffffff r2 : 00000001 r1 : 000f4240 r0 : 00000000
Flags: nZcv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
')

Anyone have an idea?

[pacapona]

What instruction did you follow?
I have make an fresh install and i can boot without problem..

[ykmag]

I followed these http://archlinuxarm.org/platforms/armv7/cubox.

It has to be said that I first upgraded from a working system. Igot the same message on the console after the upgrad, then I reinstalled from scratch.

[pepedog]

I am going to make a new rootfs soon. I figured out a single boot.scr that works for USB/sata/microsd
I am torn, kernel 3.8 with device tree support will be out soon, but you have to upgrade uBoot for that

[ykmag]

Does the boot.scr work on the existing version? If it is could you pleas post it somwhere for me (and others) to pick up?

[pepedog]

Yes it does, I stuck it here
http://myplugbox.com/multi-boot.scr
Rename to boot.scr

[ykmag]

Thanks a lot, but it did not solve my problem..
$this->bbcode_second_pass_code('', '======== Loading kernel ========
Loading file "/boot/uImage" from mmc device 0:1 (mmcda1)
undefined instruction
')

I realy suspect uImage to be broken, could you please post you uImage?

[pepedog]

I suspect if this is broken, so is everything else?
Here is how to get uimage and modules
cd /ToWhereTheRootfsIsMounted/
$this->bbcode_second_pass_code('', 'wget http://us.mirror.archlinuxarm.org/armv7h/core/linux-cubox-3.5.7-9-armv7h.pkg.tar.xz
tar xf linux-cubox-3.5.7-9-armv7h.pkg.tar.xz')
Always sync before reboot

[ykmag]

No joy...
I will try a different memory card, could be faulty.

[ykmag]

Ok so I went out and bought a new 8Gig micro SD card, different behavior but, still no joy.

This is from console:
$this->bbcode_second_pass_code('', 'Loading file "/boot/uImage" from mmc device 0:1 (mmcda1)
4246160 bytes read
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux-3.5.7-8-ARCH+
Created: 2013-01-17 17:32:45 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4246096 Bytes = 4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400e00
')

I tried to google error -110, found nothing!

EDIT:
Connect display on HDMI and it stops after :
$this->bbcode_second_pass_code('', '[ OK ]Started udev Coldplug all Devices.')
if that gives any clue (I'm clueless)
/EDIT

Any idea?