Kernel Oops since the upgrade to kernel 3.5

[moonman]

Kernel 3.8.3 should be built soon with this patch included. I didn't upload 3.8.2 because 3.8.3 has been released.

EDIT: 3.8.3 is out.

[yeehaa]

$this->bbcode_second_pass_quote('moonman', 'K')ernel 3.8.3 should be built soon with this patch included. I didn't upload 3.8.2 because 3.8.3 has been released.

EDIT: 3.8.3 is out.

[ariava]

$this->bbcode_second_pass_quote('yeehaa', '
')nope! its still there.. after the 3 day uptime and no crash on 577 i thought mine was ok. then today i got another oops with 3.8.2 and so upgraded to 3.8.3.. n i figured you have to have a long download queue in nzbget for this to happen.. so started the download again with 3.8.3 kernel and it happened again.. now trying with the cfq scheduler.. will report back in a few..

[yeehaa]

$this->bbcode_second_pass_quote('ariava', '
')
Hello, thank you for testing the patched kernel. If I may ask, could you please provide your dmesg or at least the full oops that involved nbzget (call trace included)?

$this->bbcode_second_pass_quote('yeehaa', '')$this->bbcode_second_pass_quote('ariava', '
')
Hello, thank you for testing the patched kernel. If I may ask, could you please provide your dmesg or at least the full oops that involved nzbget (call trace included)?

[yeehaa]

$this->bbcode_second_pass_quote('ariava', '
')
I apologize for being so obscure, what I wrote was really unclear.
I meant to ask if you could get the full output of the command "dmesg" after a crash of nzbget and attach it to a post here.
The command simply prints out the newest system logs, including the error messages from the kernel, if any. Therefore, its output may be very long: you can save it to a file by simply redirecting it (e.g. "dmesg > output.txt"); if you have issues with the length of the forum post, I suggest you use pastebin.

Thank you again for being so helpful.

[godofdream]

I'm trying to build the 3.8.3 Kernel.
I'm using all the archlinuxarm patches for kirkwood, except the aufs3 patch, as the kernel does not compile with it.
The debian kernel package was build, but on installing the initramfs script fails:

$this->bbcode_second_pass_code('', '
root@router:~/kernel/patch3.8.3# /etc/kernel/postinst.d/initramfs-tools 3.8.3-kirkwood /boot/vmlinuz-3.8.3-kirkwood
update-initramfs: Generating /boot/initrd.img-3.8.3-kirkwood
Copying module directory kernel/drivers/net
(excluding appletalk arcnet bonding can hamradio irda pcmcia tokenring usb wan wimax wireless)
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/slip/slhc.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/ppp_generic.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/lib/zlib_deflate/zlib_deflate.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/ppp_deflate.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/pppox.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/pppoe.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/ppp_synctty.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/lib/crc-ccitt.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/ppp_async.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/bsd_comp.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ppp/ppp_mppe.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/netconsole.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/phy/at803x.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/vxlan.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/veth.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/mii.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/net/802/fddi.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/fddi/defxx.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/macvlan.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/macvtap.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/tun.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/net/ethernet/marvell/mvmdio.ko
Copying module directory kernel/drivers/scsi
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/scsi_transport_iscsi.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/libiscsi.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/libiscsi_tcp.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/iscsi_tcp.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/raid_class.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/iscsi_boot_sysfs.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/st.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/scsi_tgt.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/misc/enclosure.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/ses.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/ch.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/sd_mod.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/sg.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/cdrom/cdrom.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/scsi/sr_mod.ko
Copying module directory kernel/drivers/block
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/block/aoe/aoe.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/lib/libcrc32c.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/lib/lru_cache.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/block/drbd/drbd.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/block/nbd.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/block/sx8.ko
Copying module directory kernel/drivers/mmc
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/mmc/core/mmc_core.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/mmc/card/mmc_block.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/mmc/card/sdio_uart.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/mmc/host/mvsdio.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/mmc/host/sdhci.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/mmc/host/sdhci-pltfm.ko
Copying module directory kernel/drivers/usb/storage
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/usb/storage/ums-isd200.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/usb/storage/ums-onetouch.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/usb/storage/ums-sddr55.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/usb/storage/ums-jumpshot.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/usb/storage/ums-datafab.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/usb/storage/ums-sddr09.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/usb/storage/ums-freecom.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/lib/lzo/lzo_decompress.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/lib/lzo/lzo_compress.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/btrfs/btrfs.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/ext2/ext2.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/jbd/jbd.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/ext3/ext3.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/isofs/isofs.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/jfs/jfs.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/net/sunrpc/sunrpc.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/lockd/lockd.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/nfs/nfs.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/reiserfs/reiserfs.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/lib/crc-itu-t.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/udf/udf.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/xfs/xfs.ko
Adding binary /sbin/modprobe
Adding library /lib/arm-linux-gnueabi/libkmod.so.2
Adding library /lib/arm-linux-gnueabi/libgcc_s.so.1
Adding library /lib/arm-linux-gnueabi/libc.so.6
Adding library /lib/ld-linux.so.3
Adding binary /sbin/rmmod
Calling hook busybox
Adding binary /bin/busybox
Calling hook fuse
Adding binary /sbin/mount.fuse
Adding module /lib/modules/3.8.3-kirkwood/kernel/fs/fuse/fuse.ko
Calling hook keymap
Calling hook klibc
Calling hook kmod
Adding binary /bin/kmod
Calling hook mdadm
Adding binary /sbin/mdadm
Adding binary /sbin/mdmon
Adding library /lib/arm-linux-gnueabi/libpthread.so.0
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/md/linear.ko
Adding module /lib/modules/3.8.3-kirkwood/kernel/drivers/md/raid0.ko
Calling hook thermal
Calling hook udev
Adding binary /sbin/udevd
Adding library /lib/arm-linux-gnueabi/libselinux.so.1
Adding library /lib/arm-linux-gnueabi/librt.so.1
Adding library /lib/arm-linux-gnueabi/libdl.so.2
Adding binary /sbin/udevadm
Adding binary /lib/udev/firmware.agent
Adding binary /lib/udev/ata_id
Adding binary /lib/udev/edd_id
Adding binary /lib/udev/scsi_id
Adding binary /sbin/blkid
Adding library /lib/arm-linux-gnueabi/libblkid.so.1
Adding library /lib/arm-linux-gnueabi/libuuid.so.1
Calling hook ntfs_3g
Adding binary /bin/ntfs-3g
Adding library /lib/arm-linux-gnueabi/libfuse.so.2
Adding library /lib/arm-linux-gnueabi/libntfs-3g.so.835
Calling hook dmsetup
Adding binary /sbin/dmsetup
Adding library /lib/arm-linux-gnueabi/libdevmapper.so.1.02.1
Adding library /lib/arm-linux-gnueabi/libudev.so.0
Segmentation fault
Building cpio /boot/initrd.img-3.8.3-kirkwood.new initramfs
')
any idea what i could do?
will the system boot without an initramfs?
is it save to use it even with the segmentation fault.

I'm running debian 7.0

[WarheadsSE]

1) we're not debian
2) we don't even ship with an initrd, so that should tell you.

[godofdream]

1.) I know, but i'm using archlinuxarm kernelpatches
2.) thats not completly correct, as initrd is activated in your kernelconfig,
that's why i thought it is used somehow

so i will try to boot with the uImage without an uInit.
did you try to disable initrd in kernelconfig?
is there a reason why there are plenty of pci drivers?

Greatings
Godofdream

[moonman]

initrd is supported in the kernel in case you want one (for example bootin goflex from USB with a present SATA drive). Pci drivers are for iconnect with pcie slot. Also i believe some componets use pcie bus internally.