Synology DiskStation

[bashseb]

Hello, I've never done an ARM installation!

The synology diskstations come with a custom Linux (I don't know what it is), but as a long-time archer I'd be curious if I can get Archlinux ARM running. None of the devices is currently supported on the website as "Platform", but it also says.

$this->bbcode_second_pass_quote('', 'H')owever, it can run on any device that supports ARMv5te, ARMv6, or ARMv7 instruction sets

[WarheadsSE]

That's an armada370, a relative of the d3. We may need tweaks for the kernel, and it is hard to directly support that which the developers don't have.

[bashseb]

thanks for this reply, WarheadsSE.

Not being a developer, this means for me I won't give it a try.

@ Future visitors to this thread
Should this situation change, please post it here! Thanks.

[bashseb]

further info on the DS213j
$this->bbcode_second_pass_code('', '$ cat /proc/cpuinfo
Processor : Marvell PJ4Bv7 Processor rev 1 (v7l)
BogoMIPS : 1196.85
Features : swp half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x581
CPU revision : 1

Hardware : Marvell Armada-370
Revision : 0000
Serial : 0000000000000000
')

$this->bbcode_second_pass_code('', 'cat /proc/meminfo
MemTotal: 510452 kB
MemFree: 365476 kB
Buffers: 8040 kB
Cached: 94468 kB
SwapCached: 0 kB
Active: 48752 kB
Inactive: 69340 kB
Active(anon): 6852 kB
Inactive(anon): 20980 kB
Active(file): 41900 kB
Inactive(file): 48360 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 2097084 kB
SwapFree: 2097084 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 15608 kB
Mapped: 11952 kB
Shmem: 12252 kB
Slab: 16760 kB
SReclaimable: 6572 kB
SUnreclaim: 10188 kB
KernelStack: 704 kB
PageTables: 1212 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 2352308 kB
Committed_AS: 133996 kB
VmallocTotal: 425984 kB
VmallocUsed: 25188 kB
VmallocChunk: 368636 kB
')

$this->bbcode_second_pass_code('', 'df -h
Filesystem Size Used Available Use% Mounted on
/dev/md0 2.3G 407.1M 1.8G 18% /
/tmp 249.2M 396.0K 248.9M 0% /tmp
/dev/XXX installed hard drives
')

$this->bbcode_second_pass_code('', '$ lsmod
Module Size Used by Tainted: P
cifs 228814 0
udf 76567 0
isofs 30803 0
loop 13350 0
usbhid 23860 0
hid 47627 1 usbhid
usblp 9129 0
ds213j_synobios 28285 0
synoacl_ext4 13092 4
synoacl_vfs 4902 4
zlib_deflate 19752 0
libcrc32c 708 0
hfsplus 78923 0
md4 3159 0
hmac 2459 0
fuse 59454 0
vfat 8797 0
fat 46336 1 vfat
cryptosoft 12235 0
ecryptfs 85918 0
sha512_generic 8615 0
sha256_generic 8619 0
sha1_generic 1613 0
ecb 1663 0
cryptodev 10743 0
ocf 17637 3 cryptosoft,ecryptfs,cryptodev
chainiv 2873 0
des_generic 17709 0
crc32c 2510 1
eseqiv 2357 0
krng 851 0
ansi_cprng 3483 0
cts 3622 0
rng 1615 4 chainiv,eseqiv,krng,ansi_cprng
aes_generic 29168 0
md5 1571 0
cbc 2244 0
cryptomgr 2250 0
pcompress 1235 0
aead 4746 1 cryptomgr
crypto_hash 11253 10 cifs,libcrc32c,md4,hmac,cryptosoft,sha512_generic,sha256_generic,sha1_generic,crc32c,md5
crypto_blkcipher 11535 6 cryptosoft,ecb,chainiv,eseqiv,cts,cbc
crypto_wq 529 1 chainiv
crypto_algapi 11713 15 hmac,ecb,chainiv,des_generic,eseqiv,krng,ansi_cprng,cts,aes_generic,cbc,cryptomgr,pcompress,aead,crypto_hash,crypto_blkcipher
crypto 6128 15 cifs,libcrc32c,hmac,cryptosoft,ecryptfs,ecb,ansi_cprng,cts,rng,cbc,pcompress,aead,crypto_hash,crypto_blkcipher,crypto_algapi
dm_snapshot 28164 0
crc_itu_t 1023 1 udf
crc_ccitt 1049 0
quota_v2 3349 2
quota_tree 6907 1 quota_v2
sg 20732 0
psnap 1555 0
p8022 817 0
llc 3095 2 psnap,p8022
ipv6 240419 52
')

$this->bbcode_second_pass_code('', ' $ uname -a
Linux DiskStation 3.2.30 #3211 Tue Apr 16 20:05:10 CST 2013 armv7l GNU/Linux synology_armada370_213j')

$this->bbcode_second_pass_code('', ' $ dmesg
[ 0.000000] Linux version 3.2.30 (root@build4) (gcc version 4.6.4 20120731 (prerelease) (Linaro GCC branch-4.6.4. Marvell GCC 201303-1655.6f19debc) ) #3211 Tue Apr 16 20:05:10 CST 2013
[ 0.000000] CPU: Marvell PJ4Bv7 Processor [561f5811] revision 1 (ARMv7), cr=18c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Marvell Armada-370
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] >>>>>>>Tag MAC 00:00:00:00:00:00
[ 0.000000] >>>>>>>Tag MAC 00:00:02:43:50:00
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c04d5444, node_mem_map c0539000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130048 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS213jv10 ihd_num=2 netif_num=1 flash_size=8
[ 0.000000] Synology Hardware Version: DS213jv10-j
[ 0.000000] Internal HD num: 2
[ 0.000000] Internal netif num: 1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 502112k/502112k available, 22176k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfa800000 ( 416 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc048d000 (4628 kB)
[ 0.000000] .init : 0xc048d000 - 0xc04b2000 ( 148 kB)
[ 0.000000] .data : 0xc04b2000 - 0xc04d5da0 ( 144 kB)
[ 0.000000] .bss : 0xc04d5dc4 - 0xc0538860 ( 395 kB)
[ 0.000000] NR_IRQS:256
[ 0.000000] a370_time_init
[ 0.000000] sched_clock: 32 bits at 600MHz, resolution 1ns, wraps every 7158ms
[ 4.340504] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 4.430470] pid_max: default: 32768 minimum: 301
[ 4.430596] Mount-cache hash table entries: 512
[ 4.431585] CPU: Testing write buffer coherency: ok
[ 4.434829] xor: measuring software checksum speed
[ 4.480445] arm4regs : 1224.800 MB/sec
[ 4.530440] 8regs : 727.200 MB/sec
[ 4.580441] 32regs : 876.400 MB/sec
[ 4.580448] xor: using function: arm4regs (1224.800 MB/sec)
[ 4.580568] NET: Registered protocol family 16
[ 4.582322] L0 cache Enabled
[ 4.582332] Speculative Prefetch Disabled
[ 4.582354] Aurora L2 Cache Enabled
[ 4.582387] Support IO coherency.
[ 4.582399] Enable DLB and DRAM write coalescing
[ 4.698374]
[ 4.698379] CPU Interface
[ 4.698383] -------------
[ 4.698388] SDRAM_CS0 ....base 00000000, size 512MB
[ 4.698399] SDRAM_CS1 ....disable
[ 4.698404] SDRAM_CS2 ....disable
[ 4.698410] SDRAM_CS3 ....disable
[ 4.698415] DEVICE_CS0 ....base f2000000, size 32MB
[ 4.698426] DEVICE_CS1 ....no such
[ 4.698441] DEVICE_CS2 ....no such
[ 4.698454] DEVICE_CS3 ....no such
[ 4.698468] PEX0_MEM ....base e0000000, size 32MB
[ 4.698477] PEX0_IO ....base f1100000, size 1MB
[ 4.698487] PEX1_MEM ....base e2000000, size 32MB
[ 4.698496] PEX1_IO ....base f1200000, size 1MB
[ 4.698506] INTER_REGS ....base d0000000, size 1MB
[ 4.698515] DMA_UART ....no such
[ 4.698529] SPI_CS0 ....base f0000000, size 16MB
[ 4.698539] SPI_CS1 ....no such
[ 4.698553] SPI_CS2 ....no such
[ 4.698567] SPI_CS3 ....no such
[ 4.698580] SPI_CS4 ....no such
[ 4.698594] SPI_CS5 ....no such
[ 4.698608] SPI_CS6 ....no such
[ 4.698622] SPI_CS7 ....no such
[ 4.698635] BOOT_ROM_CS ....no such
[ 4.698649] DEV_BOOTCS ....base f5000000, size 16MB
[ 4.698660] PMU_SCRATCHPAD ....no such
[ 4.698674] CRYPT0_ENG ....base c8010000, size 64KB
[ 4.698685]
[ 4.698688] Marvell Armada370 Board-- SYNO-DS213j-BP Soc: MV6710 A1 LE
[ 4.698700] LSP version: linux-3.2.34-axp_a370-2012_Q4.1p5
[ 4.698705]
[ 4.698707]
[ 4.698715] Detected Tclk 200000000, SysClk 600000000, FabricClk 600000000
[ 4.700172] Synology Armada370 1, 2 bay GPIO Init
[ 4.701595] Marvell USB EHCI Host controller #0: d0041600
[ 4.701928] Marvell USB EHCI Host controller #1: d0041400
[ 4.703279] pci_bus 0000:00: scanning bus
[ 4.703332] pci_bus 0000:00: fixups for bus
[ 4.703338] PCI: bus0: Fast back to back transfers enabled
[ 4.703346] pci_bus 0000:00: bus scan returning with max=00
[ 4.703353] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
[ 4.711136] bio: create slab <bio-0> at 0
[ 4.880620] raid6: int32x1 145 MB/s
[ 5.050495] raid6: int32x2 225 MB/s
[ 5.220461] raid6: int32x4 269 MB/s
[ 5.390446] raid6: int32x8 297 MB/s
[ 5.390453] raid6: using algorithm int32x8 (297 MB/s)
[ 5.391059] SCSI subsystem initialized
[ 5.391328] libata version 3.00 loaded.
[ 5.391539] usbcore: registered new interface driver usbfs
[ 5.391731] usbcore: registered new interface driver hub
[ 5.391867] usbcore: registered new interface driver ethub
[ 5.391988] usbcore: registered new device driver usb
[ 5.392682] Switching to clocksource armada370_clocksource
[ 5.394187] NET: Registered protocol family 2
[ 5.394291] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 5.394463] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 5.394656] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 5.394768] TCP: Hash tables configured (established 16384 bind 16384)
[ 5.394776] TCP reno registered
[ 5.394785] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 5.394800] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 5.394968] NET: Registered protocol family 1
[ 5.395146] RPC: Registered named UNIX socket transport module.
[ 5.395155] RPC: Registered udp transport module.
[ 5.395160] RPC: Registered tcp transport module.
[ 5.395166] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.395177] PCI: CLS 0 bytes, default 32
[ 5.395327] Trying to unpack rootfs image as initramfs...
[ 7.074938] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 7.110625] Freeing initrd memory: 8192K
[ 7.110855] XOR registered 4 channels
[ 7.110865] cesadev_init(c04951b0)
[ 7.111541] Armada XP hwmon thermal sensor initialized.
[ 7.111627] Initializing Armada-XP CPU power management (WFI)
[ 7.112371] VFS: Disk quotas dquot_6.5.2
[ 7.112402] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.112888] msgmni has been set to 996
[ 7.113109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 7.113120] io scheduler noop registered
[ 7.113159] io scheduler cfq registered (default)
[ 7.173247] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 7.174269] serial8250.0: ttyS0 at MMIO 0xd0012000 (irq = 41) is a 16550A
[ 7.793636] console [ttyS0] enabled
[ 7.797573] serial8250.1: ttyS1 at MMIO 0xd0012100 (irq = 42) is a 16550A
[ 7.809769] brd: module loaded
[ 7.812870] Loading iSCSI transport class v2.0-870.
[ 7.818627] sata_mv sata_mv.0: version 1.28
[ 7.818778] sata_mv sata_mv.0: slots 32 ports 2
[ 7.825018] scsi0 : sata_mv
[ 7.828240] scsi1 : sata_mv
[ 7.831339] ata1: SATA max UDMA/133 irq 55
[ 7.835486] ata2: SATA max UDMA/133 irq 55
[ 10.833250] Delay 10 seconds to wait for disk 1 ready.
[ 21.322723] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 21.362745] ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 21.369481] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 21.412744] ata1.00: configured for UDMA/133
[ 21.417308] scsi 0:0:0:0: Direct-Access WDC WD20EFRX-68AX9N0 80.0 PQ: 0 ANSI: 5
[ 21.426180] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 21.433983] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 24.433510] sd 0:0:0:0: [sda] Write Protect is off
[ 24.438330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.438391] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.457929] sda: sda1 sda2
[ 24.461649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.082719] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 29.262739] ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 29.269476] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 29.312742] ata2.00: configured for UDMA/133
[ 29.317265] scsi 1:0:0:0: Direct-Access WDC WD20EFRX-68AX9N0 80.0 PQ: 0 ANSI: 5
[ 29.326145] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 29.333948] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 29.340006] sd 1:0:0:0: [sdb] Write Protect is off
[ 29.344844] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 29.345258] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.354712] physmap platform flash device: 00800000 at f0000000
[ 29.362261] physmap-flash physmap-flash.0: map_probe failed
[ 29.373104] SPI Serial flash detected @ 0xf0000000, 8192KB (128sec x 64KB)
[ 29.380028] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x7f0000
[ 29.424348] 6 RedBoot partitions found on MTD device SYNOMTD-0
[ 29.430209] SYNOMTD flash bank 0: Using RedBoot partition definition
[ 29.436600] Creating 6 MTD partitions on "SYNOMTD-0":
[ 29.441681] 0x000000000000-0x0000000c0000 : "RedBoot"
[ 29.446956] sdb: sdb1 sdb2
[ 29.450773] 0x0000000c0000-0x000000390000 : "zImage"
[ 29.456497] 0x000000390000-0x0000007d0000 : "rd.gz"
[ 29.462067] 0x0000007d0000-0x0000007e0000 : "vendor"
[ 29.467164] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 29.473295] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 29.479417] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 29.485550] serial number='1340LAN005742'
[ 29.490103] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
[ 29.497013] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 29.502000] 0x0000007f0000-0x000000800000 : "FIS directory"
[ 29.511315] SPI Serial flash detected @ 0xf0000000, 8192KB (128sec x 64KB)
[ 29.519165] mv_eth_probe: port_mask=0x3, cpu_mask=0x1
[ 29.524416] 0 - Base 0x00000000 , Size = 0x00000001.
[ 29.529404] 4 - Base 0xf2000000 , Size = 0x00000001.
[ 29.534398] 8 - Base 0xe0000000 , Size = 0x00000001.
[ 29.539385] 9 - Base 0xf1100000 , Size = 0x00000001.
[ 29.544379] 10 - Base 0xe2000000 , Size = 0x00000001.
[ 29.549453] 11 - Base 0xf1200000 , Size = 0x00000001.
[ 29.554532] 12 - Base 0xd0000000 , Size = 0x00000001.
[ 29.559606] 14 - Base 0xf0000000 , Size = 0x00000001.
[ 29.564685] 23 - Base 0xf5000000 , Size = 0x00000001.
[ 29.569759] 25 - Base 0xc8010000 , Size = 0x00000001.
[ 29.574853] o 2 Giga ports supported
[ 29.578617] o SKB recycle supported (Enabled)
[ 29.583173] o NETA acceleration mode 1
[ 29.587113] o RX Queue support: 8 Queues * 128 Descriptors
[ 29.592803] o TX Queue support: 8 Queues * 532 Descriptors
[ 29.598487] o GSO supported
[ 29.601466] o GRO supported
[ 29.604450] o Receive checksum offload supported
[ 29.609261] o Transmit checksum offload supported
[ 29.614165] o Driver ERROR statistics enabled
[ 29.618714]
[ 29.620401] o Loading network interface(s)
[ 29.624716]
[ 29.626214] o Port 0 is connected to Linux netdevice
[ 29.631795] giga p=0: mtu=1500, mac=d0029e40
[ 29.640036] o eth0, ifindex = 2, GbE port = 0
[ 29.644617] o eth0, phy chipid = 1410dd0, Support WOL = 32
[ 29.650659]
[ 29.652161]
[ 29.652163] o Warning: GbE port 1 is not connected to PHY/RGMII/Switch, skip initialization
[ 29.652169]
[ 29.663721]
[ 29.665628] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 29.672220] ehci_marvell ehci_marvell.0: Marvell Orion EHCI
[ 29.677891] ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1
[ 29.712735] ehci_marvell ehci_marvell.0: irq 45, io base 0xfbb50100
[ 29.732709] ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
[ 29.739532] hub 1-0:1.0: USB hub found
[ 29.743329] hub 1-0:1.0: 1 port detected
[ 29.747574] ehci_marvell ehci_marvell.1: Marvell Orion EHCI
[ 29.753209] ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 2
[ 29.782724] ehci_marvell ehci_marvell.1: irq 46, io base 0xfbb51100
[ 29.802708] ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00
[ 29.809491] hub 2-0:1.0: USB hub found
[ 29.813287] hub 2-0:1.0: 1 port detected
[ 29.817932] usbcore: registered new interface driver uas
[ 29.823287] Initializing USB Mass Storage driver...
[ 29.828347] usbcore: registered new interface driver usb-storage
[ 29.834394] USB Mass Storage support registered.
[ 29.839032] i2c /dev entries driver
[ 29.843222] md: linear personality registered for level -1
[ 29.848736] md: raid0 personality registered for level 0
[ 29.854088] md: raid1 personality registered for level 1
[ 29.859425] md: raid10 personality registered for level 10
[ 29.864942] md: raid6 personality registered for level 6
[ 29.870278] md: raid5 personality registered for level 5
[ 29.875622] md: raid4 personality registered for level 4
[ 29.881218] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 29.889812] cpuidle: using governor ladder
[ 29.894106] cpuidle: using governor menu
[ 29.898168] TCP cubic registered
[ 29.901412] NET: Registered protocol family 17
[ 29.905924] Registering the dns_resolver key type
[ 29.910679] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[ 29.919192] md: Waiting for all devices to be available before autodetect
[ 29.926034] md: If you don't use raid, use raid=noautodetect
[ 29.932221] md: Autodetecting RAID arrays.
[ 29.988937] md: Scanned 4 and added 4 devices.
[ 29.993412] md: autorun ...
[ 29.996220] md: considering sda1 ...
[ 29.999840] md: adding sda1 ...
[ 30.003101] md: sda2 has different UUID to sda1
[ 30.007665] md: adding sdb1 ...
[ 30.010916] md: sdb2 has different UUID to sda1
[ 30.015497] md: created md0
[ 30.018305] md: bind<sdb1>
[ 30.023817] md: running: <sda1><sdb1>
[ 30.027759] bio: create slab <bio-1> at 1
[ 30.031932] md/raid1:md0: active with 2 out of 2 mirrors
[ 30.037357] md0: detected capacity change from 0 to 2549940224
[ 30.043359] md: considering sda2 ...
[ 30.046973] md: adding sda2 ...
[ 30.050234] md: adding sdb2 ...
[ 30.053960] md: created md1
[ 30.056770] md: bind<sdb2>
[ 30.059532] md: bind<sda2>
[ 30.062278] md: running: <sda2><sdb2>
[ 30.066282] md/raid1:md1: active with 2 out of 2 mirrors
[ 30.071691] md1: detected capacity change from 0 to 2147418112
[ 30.077701] md: ... autorun DONE.
[ 30.081155] RAMDISK: lzma image found at block 0
[ 31.951858] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 31.992212] ds213j_synobios: module license 'Synology Inc.' taints kernel.
[ 31.999167] Disabling lock debugging due to kernel taint
[ 32.006009] correction with 0x03
[ 32.013483] synobios: load, major number 201
[ 32.017788] Brand: Synology
[ 32.020614] Model: DS-213j
[ 32.023358] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 32.064158] synobios: unload
[ 32.278746] md0: unknown partition table
[ 32.662959] EXT4-fs (md0): barriers disabled
[ 32.673352] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[ 33.053502] md1: unknown partition table
[ 33.116123] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 42.007042] correction with 0x03
[ 42.014384] synobios: load, major number 201
[ 42.018689] Brand: Synology
[ 42.021514] Model: DS-213j
[ 42.024264] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 42.060009] synobios: unload
[ 46.869397] synoacl module [synoacl_ext4] is not loaded
[ 46.874795] synoacl module [synoacl_vfs] is not loaded
[ 46.889401] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 46.933272] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 46.941173] VFS: Mounted root (ext4 filesystem) on device 9:0.
[ 46.947053] Trying to move old root to /initrd ... okay
[ 46.954422] Freeing init memory: 148K
[ 47.163665] EXT4-fs (md0): re-mounted. Opts: (null)
[ 51.102116] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 51.302456] NET: Registered protocol family 10
[ 51.559608] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 51.578958] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 52.978496] encryptfs using the OCF package.
[ 53.375224] fuse init (API version 7.17)
[ 53.637422] btrfs: Unknown symbol lzo1x_decompress_safe (err 0)
[ 53.643447] btrfs: Unknown symbol lzo1x_1_compress (err 0)
[ 54.001206] correction with 0x03
[ 54.009634] synobios: load, major number 201
[ 54.013959] Brand: Synology
[ 54.016786] Model: DS-213j
[ 54.019518] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 54.434587] eth0: mac address changed
[ 54.534916] pool #0: pkt_size=1536, buf_size=1632 - 2048 of 2048 buffers added
[ 54.542781] eth0: link up
[ 54.545438] eth0: started
[ 65.012714] eth0: no IPv6 routers present
[ 67.482748] ata1.00: configured for UDMA/133
[ 67.487057] ata1: EH complete
[ 67.491849] ata2.00: configured for UDMA/133
[ 67.496199] ata2: EH complete
[ 68.158137] usbcore: registered new interface driver usblp
[ 68.337546] usbcore: registered new interface driver usbhid
[ 68.343191] usbhid: USB HID core driver
[ 88.551706] loop: module loaded
[ 92.208185] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[ 246.843861] md: bind<sda5>
[ 246.846984] md: bind<sdb5>
[ 246.882108] md/raid1:md2: active with 2 out of 2 mirrors
[ 246.887565] md2: detected capacity change from 0 to 1995550359552
[ 247.206382] md2: unknown partition table
[ 597.291148] EXT4-fs (dm-0): barriers disabled
[ 598.041937] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 598.369067] EXT4-fs (dm-0): re-mounted. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl
[ 598.452993] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 598.476364] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 621.402693] md: requested-resync of RAID array md2
[ 621.407518] md: minimum _guaranteed_ speed: 10000 KB/sec/disk.
[ 621.413481] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for requested-resync.
[ 621.423801] md: using 128k window, over a total of 1948779648k.')

[adamhuang]

hi, bashseb

i install opensuse on my ds213j, is failed....
can your share you ds213j whole flash to me ?

thanks a lot.

41814410@qq.com o

$this->bbcode_second_pass_quote('bashseb', 'f')urther info on the DS213j
$this->bbcode_second_pass_code('', '$ cat /proc/cpuinfo
Processor : Marvell PJ4Bv7 Processor rev 1 (v7l)
BogoMIPS : 1196.85
Features : swp half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x581
CPU revision : 1

Hardware : Marvell Armada-370
Revision : 0000
Serial : 0000000000000000
')

$this->bbcode_second_pass_code('', 'cat /proc/meminfo
MemTotal: 510452 kB
MemFree: 365476 kB
Buffers: 8040 kB
Cached: 94468 kB
SwapCached: 0 kB
Active: 48752 kB
Inactive: 69340 kB
Active(anon): 6852 kB
Inactive(anon): 20980 kB
Active(file): 41900 kB
Inactive(file): 48360 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 2097084 kB
SwapFree: 2097084 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 15608 kB
Mapped: 11952 kB
Shmem: 12252 kB
Slab: 16760 kB
SReclaimable: 6572 kB
SUnreclaim: 10188 kB
KernelStack: 704 kB
PageTables: 1212 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 2352308 kB
Committed_AS: 133996 kB
VmallocTotal: 425984 kB
VmallocUsed: 25188 kB
VmallocChunk: 368636 kB
')

$this->bbcode_second_pass_code('', 'df -h
Filesystem Size Used Available Use% Mounted on
/dev/md0 2.3G 407.1M 1.8G 18% /
/tmp 249.2M 396.0K 248.9M 0% /tmp
/dev/XXX installed hard drives
')

$this->bbcode_second_pass_code('', '$ lsmod
Module Size Used by Tainted: P
cifs 228814 0
udf 76567 0
isofs 30803 0
loop 13350 0
usbhid 23860 0
hid 47627 1 usbhid
usblp 9129 0
ds213j_synobios 28285 0
synoacl_ext4 13092 4
synoacl_vfs 4902 4
zlib_deflate 19752 0
libcrc32c 708 0
hfsplus 78923 0
md4 3159 0
hmac 2459 0
fuse 59454 0
vfat 8797 0
fat 46336 1 vfat
cryptosoft 12235 0
ecryptfs 85918 0
sha512_generic 8615 0
sha256_generic 8619 0
sha1_generic 1613 0
ecb 1663 0
cryptodev 10743 0
ocf 17637 3 cryptosoft,ecryptfs,cryptodev
chainiv 2873 0
des_generic 17709 0
crc32c 2510 1
eseqiv 2357 0
krng 851 0
ansi_cprng 3483 0
cts 3622 0
rng 1615 4 chainiv,eseqiv,krng,ansi_cprng
aes_generic 29168 0
md5 1571 0
cbc 2244 0
cryptomgr 2250 0
pcompress 1235 0
aead 4746 1 cryptomgr
crypto_hash 11253 10 cifs,libcrc32c,md4,hmac,cryptosoft,sha512_generic,sha256_generic,sha1_generic,crc32c,md5
crypto_blkcipher 11535 6 cryptosoft,ecb,chainiv,eseqiv,cts,cbc
crypto_wq 529 1 chainiv
crypto_algapi 11713 15 hmac,ecb,chainiv,des_generic,eseqiv,krng,ansi_cprng,cts,aes_generic,cbc,cryptomgr,pcompress,aead,crypto_hash,crypto_blkcipher
crypto 6128 15 cifs,libcrc32c,hmac,cryptosoft,ecryptfs,ecb,ansi_cprng,cts,rng,cbc,pcompress,aead,crypto_hash,crypto_blkcipher,crypto_algapi
dm_snapshot 28164 0
crc_itu_t 1023 1 udf
crc_ccitt 1049 0
quota_v2 3349 2
quota_tree 6907 1 quota_v2
sg 20732 0
psnap 1555 0
p8022 817 0
llc 3095 2 psnap,p8022
ipv6 240419 52
')

$this->bbcode_second_pass_code('', ' $ uname -a
Linux DiskStation 3.2.30 #3211 Tue Apr 16 20:05:10 CST 2013 armv7l GNU/Linux synology_armada370_213j')

$this->bbcode_second_pass_code('', ' $ dmesg
[ 0.000000] Linux version 3.2.30 (root@build4) (gcc version 4.6.4 20120731 (prerelease) (Linaro GCC branch-4.6.4. Marvell GCC 201303-1655.6f19debc) ) #3211 Tue Apr 16 20:05:10 CST 2013
[ 0.000000] CPU: Marvell PJ4Bv7 Processor [561f5811] revision 1 (ARMv7), cr=18c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Marvell Armada-370
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] >>>>>>>Tag MAC 00:00:00:00:00:00
[ 0.000000] >>>>>>>Tag MAC 00:00:02:43:50:00
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c04d5444, node_mem_map c0539000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130048 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS213jv10 ihd_num=2 netif_num=1 flash_size=8
[ 0.000000] Synology Hardware Version: DS213jv10-j
[ 0.000000] Internal HD num: 2
[ 0.000000] Internal netif num: 1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 502112k/502112k available, 22176k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfa800000 ( 416 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc048d000 (4628 kB)
[ 0.000000] .init : 0xc048d000 - 0xc04b2000 ( 148 kB)
[ 0.000000] .data : 0xc04b2000 - 0xc04d5da0 ( 144 kB)
[ 0.000000] .bss : 0xc04d5dc4 - 0xc0538860 ( 395 kB)
[ 0.000000] NR_IRQS:256
[ 0.000000] a370_time_init
[ 0.000000] sched_clock: 32 bits at 600MHz, resolution 1ns, wraps every 7158ms
[ 4.340504] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 4.430470] pid_max: default: 32768 minimum: 301
[ 4.430596] Mount-cache hash table entries: 512
[ 4.431585] CPU: Testing write buffer coherency: ok
[ 4.434829] xor: measuring software checksum speed
[ 4.480445] arm4regs : 1224.800 MB/sec
[ 4.530440] 8regs : 727.200 MB/sec
[ 4.580441] 32regs : 876.400 MB/sec
[ 4.580448] xor: using function: arm4regs (1224.800 MB/sec)
[ 4.580568] NET: Registered protocol family 16
[ 4.582322] L0 cache Enabled
[ 4.582332] Speculative Prefetch Disabled
[ 4.582354] Aurora L2 Cache Enabled
[ 4.582387] Support IO coherency.
[ 4.582399] Enable DLB and DRAM write coalescing
[ 4.698374]
[ 4.698379] CPU Interface
[ 4.698383] -------------
[ 4.698388] SDRAM_CS0 ....base 00000000, size 512MB
[ 4.698399] SDRAM_CS1 ....disable
[ 4.698404] SDRAM_CS2 ....disable
[ 4.698410] SDRAM_CS3 ....disable
[ 4.698415] DEVICE_CS0 ....base f2000000, size 32MB
[ 4.698426] DEVICE_CS1 ....no such
[ 4.698441] DEVICE_CS2 ....no such
[ 4.698454] DEVICE_CS3 ....no such
[ 4.698468] PEX0_MEM ....base e0000000, size 32MB
[ 4.698477] PEX0_IO ....base f1100000, size 1MB
[ 4.698487] PEX1_MEM ....base e2000000, size 32MB
[ 4.698496] PEX1_IO ....base f1200000, size 1MB
[ 4.698506] INTER_REGS ....base d0000000, size 1MB
[ 4.698515] DMA_UART ....no such
[ 4.698529] SPI_CS0 ....base f0000000, size 16MB
[ 4.698539] SPI_CS1 ....no such
[ 4.698553] SPI_CS2 ....no such
[ 4.698567] SPI_CS3 ....no such
[ 4.698580] SPI_CS4 ....no such
[ 4.698594] SPI_CS5 ....no such
[ 4.698608] SPI_CS6 ....no such
[ 4.698622] SPI_CS7 ....no such
[ 4.698635] BOOT_ROM_CS ....no such
[ 4.698649] DEV_BOOTCS ....base f5000000, size 16MB
[ 4.698660] PMU_SCRATCHPAD ....no such
[ 4.698674] CRYPT0_ENG ....base c8010000, size 64KB
[ 4.698685]
[ 4.698688] Marvell Armada370 Board-- SYNO-DS213j-BP Soc: MV6710 A1 LE
[ 4.698700] LSP version: linux-3.2.34-axp_a370-2012_Q4.1p5
[ 4.698705]
[ 4.698707]
[ 4.698715] Detected Tclk 200000000, SysClk 600000000, FabricClk 600000000
[ 4.700172] Synology Armada370 1, 2 bay GPIO Init
[ 4.701595] Marvell USB EHCI Host controller #0: d0041600
[ 4.701928] Marvell USB EHCI Host controller #1: d0041400
[ 4.703279] pci_bus 0000:00: scanning bus
[ 4.703332] pci_bus 0000:00: fixups for bus
[ 4.703338] PCI: bus0: Fast back to back transfers enabled
[ 4.703346] pci_bus 0000:00: bus scan returning with max=00
[ 4.703353] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
[ 4.711136] bio: create slab <bio-0> at 0
[ 4.880620] raid6: int32x1 145 MB/s
[ 5.050495] raid6: int32x2 225 MB/s
[ 5.220461] raid6: int32x4 269 MB/s
[ 5.390446] raid6: int32x8 297 MB/s
[ 5.390453] raid6: using algorithm int32x8 (297 MB/s)
[ 5.391059] SCSI subsystem initialized
[ 5.391328] libata version 3.00 loaded.
[ 5.391539] usbcore: registered new interface driver usbfs
[ 5.391731] usbcore: registered new interface driver hub
[ 5.391867] usbcore: registered new interface driver ethub
[ 5.391988] usbcore: registered new device driver usb
[ 5.392682] Switching to clocksource armada370_clocksource
[ 5.394187] NET: Registered protocol family 2
[ 5.394291] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 5.394463] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 5.394656] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 5.394768] TCP: Hash tables configured (established 16384 bind 16384)
[ 5.394776] TCP reno registered
[ 5.394785] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 5.394800] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 5.394968] NET: Registered protocol family 1
[ 5.395146] RPC: Registered named UNIX socket transport module.
[ 5.395155] RPC: Registered udp transport module.
[ 5.395160] RPC: Registered tcp transport module.
[ 5.395166] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.395177] PCI: CLS 0 bytes, default 32
[ 5.395327] Trying to unpack rootfs image as initramfs...
[ 7.074938] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 7.110625] Freeing initrd memory: 8192K
[ 7.110855] XOR registered 4 channels
[ 7.110865] cesadev_init(c04951b0)
[ 7.111541] Armada XP hwmon thermal sensor initialized.
[ 7.111627] Initializing Armada-XP CPU power management (WFI)
[ 7.112371] VFS: Disk quotas dquot_6.5.2
[ 7.112402] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.112888] msgmni has been set to 996
[ 7.113109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 7.113120] io scheduler noop registered
[ 7.113159] io scheduler cfq registered (default)
[ 7.173247] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 7.174269] serial8250.0: ttyS0 at MMIO 0xd0012000 (irq = 41) is a 16550A
[ 7.793636] console [ttyS0] enabled
[ 7.797573] serial8250.1: ttyS1 at MMIO 0xd0012100 (irq = 42) is a 16550A
[ 7.809769] brd: module loaded
[ 7.812870] Loading iSCSI transport class v2.0-870.
[ 7.818627] sata_mv sata_mv.0: version 1.28
[ 7.818778] sata_mv sata_mv.0: slots 32 ports 2
[ 7.825018] scsi0 : sata_mv
[ 7.828240] scsi1 : sata_mv
[ 7.831339] ata1: SATA max UDMA/133 irq 55
[ 7.835486] ata2: SATA max UDMA/133 irq 55
[ 10.833250] Delay 10 seconds to wait for disk 1 ready.
[ 21.322723] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 21.362745] ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 21.369481] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 21.412744] ata1.00: configured for UDMA/133
[ 21.417308] scsi 0:0:0:0: Direct-Access WDC WD20EFRX-68AX9N0 80.0 PQ: 0 ANSI: 5
[ 21.426180] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 21.433983] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 24.433510] sd 0:0:0:0: [sda] Write Protect is off
[ 24.438330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.438391] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.457929] sda: sda1 sda2
[ 24.461649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.082719] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 29.262739] ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 29.269476] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 29.312742] ata2.00: configured for UDMA/133
[ 29.317265] scsi 1:0:0:0: Direct-Access WDC WD20EFRX-68AX9N0 80.0 PQ: 0 ANSI: 5
[ 29.326145] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 29.333948] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 29.340006] sd 1:0:0:0: [sdb] Write Protect is off
[ 29.344844] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 29.345258] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.354712] physmap platform flash device: 00800000 at f0000000
[ 29.362261] physmap-flash physmap-flash.0: map_probe failed
[ 29.373104] SPI Serial flash detected @ 0xf0000000, 8192KB (128sec x 64KB)
[ 29.380028] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x7f0000
[ 29.424348] 6 RedBoot partitions found on MTD device SYNOMTD-0
[ 29.430209] SYNOMTD flash bank 0: Using RedBoot partition definition
[ 29.436600] Creating 6 MTD partitions on "SYNOMTD-0":
[ 29.441681] 0x000000000000-0x0000000c0000 : "RedBoot"
[ 29.446956] sdb: sdb1 sdb2
[ 29.450773] 0x0000000c0000-0x000000390000 : "zImage"
[ 29.456497] 0x000000390000-0x0000007d0000 : "rd.gz"
[ 29.462067] 0x0000007d0000-0x0000007e0000 : "vendor"
[ 29.467164] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 29.473295] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 29.479417] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 29.485550] serial number='1340LAN005742'
[ 29.490103] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
[ 29.497013] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 29.502000] 0x0000007f0000-0x000000800000 : "FIS directory"
[ 29.511315] SPI Serial flash detected @ 0xf0000000, 8192KB (128sec x 64KB)
[ 29.519165] mv_eth_probe: port_mask=0x3, cpu_mask=0x1
[ 29.524416] 0 - Base 0x00000000 , Size = 0x00000001.
[ 29.529404] 4 - Base 0xf2000000 , Size = 0x00000001.
[ 29.534398] 8 - Base 0xe0000000 , Size = 0x00000001.
[ 29.539385] 9 - Base 0xf1100000 , Size = 0x00000001.
[ 29.544379] 10 - Base 0xe2000000 , Size = 0x00000001.
[ 29.549453] 11 - Base 0xf1200000 , Size = 0x00000001.
[ 29.554532] 12 - Base 0xd0000000 , Size = 0x00000001.
[ 29.559606] 14 - Base 0xf0000000 , Size = 0x00000001.
[ 29.564685] 23 - Base 0xf5000000 , Size = 0x00000001.
[ 29.569759] 25 - Base 0xc8010000 , Size = 0x00000001.
[ 29.574853] o 2 Giga ports supported
[ 29.578617] o SKB recycle supported (Enabled)
[ 29.583173] o NETA acceleration mode 1
[ 29.587113] o RX Queue support: 8 Queues * 128 Descriptors
[ 29.592803] o TX Queue support: 8 Queues * 532 Descriptors
[ 29.598487] o GSO supported
[ 29.601466] o GRO supported
[ 29.604450] o Receive checksum offload supported
[ 29.609261] o Transmit checksum offload supported
[ 29.614165] o Driver ERROR statistics enabled
[ 29.618714]
[ 29.620401] o Loading network interface(s)
[ 29.624716]
[ 29.626214] o Port 0 is connected to Linux netdevice
[ 29.631795] giga p=0: mtu=1500, mac=d0029e40
[ 29.640036] o eth0, ifindex = 2, GbE port = 0
[ 29.644617] o eth0, phy chipid = 1410dd0, Support WOL = 32
[ 29.650659]
[ 29.652161]
[ 29.652163] o Warning: GbE port 1 is not connected to PHY/RGMII/Switch, skip initialization
[ 29.652169]
[ 29.663721]
[ 29.665628] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 29.672220] ehci_marvell ehci_marvell.0: Marvell Orion EHCI
[ 29.677891] ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1
[ 29.712735] ehci_marvell ehci_marvell.0: irq 45, io base 0xfbb50100
[ 29.732709] ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
[ 29.739532] hub 1-0:1.0: USB hub found
[ 29.743329] hub 1-0:1.0: 1 port detected
[ 29.747574] ehci_marvell ehci_marvell.1: Marvell Orion EHCI
[ 29.753209] ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 2
[ 29.782724] ehci_marvell ehci_marvell.1: irq 46, io base 0xfbb51100
[ 29.802708] ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00
[ 29.809491] hub 2-0:1.0: USB hub found
[ 29.813287] hub 2-0:1.0: 1 port detected
[ 29.817932] usbcore: registered new interface driver uas
[ 29.823287] Initializing USB Mass Storage driver...
[ 29.828347] usbcore: registered new interface driver usb-storage
[ 29.834394] USB Mass Storage support registered.
[ 29.839032] i2c /dev entries driver
[ 29.843222] md: linear personality registered for level -1
[ 29.848736] md: raid0 personality registered for level 0
[ 29.854088] md: raid1 personality registered for level 1
[ 29.859425] md: raid10 personality registered for level 10
[ 29.864942] md: raid6 personality registered for level 6
[ 29.870278] md: raid5 personality registered for level 5
[ 29.875622] md: raid4 personality registered for level 4
[ 29.881218] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 29.889812] cpuidle: using governor ladder
[ 29.894106] cpuidle: using governor menu
[ 29.898168] TCP cubic registered
[ 29.901412] NET: Registered protocol family 17
[ 29.905924] Registering the dns_resolver key type
[ 29.910679] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[ 29.919192] md: Waiting for all devices to be available before autodetect
[ 29.926034] md: If you don't use raid, use raid=noautodetect
[ 29.932221] md: Autodetecting RAID arrays.
[ 29.988937] md: Scanned 4 and added 4 devices.
[ 29.993412] md: autorun ...
[ 29.996220] md: considering sda1 ...
[ 29.999840] md: adding sda1 ...
[ 30.003101] md: sda2 has different UUID to sda1
[ 30.007665] md: adding sdb1 ...
[ 30.010916] md: sdb2 has different UUID to sda1
[ 30.015497] md: created md0
[ 30.018305] md: bind<sdb1>
[ 30.023817] md: running: <sda1><sdb1>
[ 30.027759] bio: create slab <bio-1> at 1
[ 30.031932] md/raid1:md0: active with 2 out of 2 mirrors
[ 30.037357] md0: detected capacity change from 0 to 2549940224
[ 30.043359] md: considering sda2 ...
[ 30.046973] md: adding sda2 ...
[ 30.050234] md: adding sdb2 ...
[ 30.053960] md: created md1
[ 30.056770] md: bind<sdb2>
[ 30.059532] md: bind<sda2>
[ 30.062278] md: running: <sda2><sdb2>
[ 30.066282] md/raid1:md1: active with 2 out of 2 mirrors
[ 30.071691] md1: detected capacity change from 0 to 2147418112
[ 30.077701] md: ... autorun DONE.
[ 30.081155] RAMDISK: lzma image found at block 0
[ 31.951858] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 31.992212] ds213j_synobios: module license 'Synology Inc.' taints kernel.
[ 31.999167] Disabling lock debugging due to kernel taint
[ 32.006009] correction with 0x03
[ 32.013483] synobios: load, major number 201
[ 32.017788] Brand: Synology
[ 32.020614] Model: DS-213j
[ 32.023358] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 32.064158] synobios: unload
[ 32.278746] md0: unknown partition table
[ 32.662959] EXT4-fs (md0): barriers disabled
[ 32.673352] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[ 33.053502] md1: unknown partition table
[ 33.116123] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 42.007042] correction with 0x03
[ 42.014384] synobios: load, major number 201
[ 42.018689] Brand: Synology
[ 42.021514] Model: DS-213j
[ 42.024264] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 42.060009] synobios: unload
[ 46.869397] synoacl module [synoacl_ext4] is not loaded
[ 46.874795] synoacl module [synoacl_vfs] is not loaded
[ 46.889401] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 46.933272] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 46.941173] VFS: Mounted root (ext4 filesystem) on device 9:0.
[ 46.947053] Trying to move old root to /initrd ... okay
[ 46.954422] Freeing init memory: 148K
[ 47.163665] EXT4-fs (md0): re-mounted. Opts: (null)
[ 51.102116] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 51.302456] NET: Registered protocol family 10
[ 51.559608] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 51.578958] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 52.978496] encryptfs using the OCF package.
[ 53.375224] fuse init (API version 7.17)
[ 53.637422] btrfs: Unknown symbol lzo1x_decompress_safe (err 0)
[ 53.643447] btrfs: Unknown symbol lzo1x_1_compress (err 0)
[ 54.001206] correction with 0x03
[ 54.009634] synobios: load, major number 201
[ 54.013959] Brand: Synology
[ 54.016786] Model: DS-213j
[ 54.019518] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 54.434587] eth0: mac address changed
[ 54.534916] pool #0: pkt_size=1536, buf_size=1632 - 2048 of 2048 buffers added
[ 54.542781] eth0: link up
[ 54.545438] eth0: started
[ 65.012714] eth0: no IPv6 routers present
[ 67.482748] ata1.00: configured for UDMA/133
[ 67.487057] ata1: EH complete
[ 67.491849] ata2.00: configured for UDMA/133
[ 67.496199] ata2: EH complete
[ 68.158137] usbcore: registered new interface driver usblp
[ 68.337546] usbcore: registered new interface driver usbhid
[ 68.343191] usbhid: USB HID core driver
[ 88.551706] loop: module loaded
[ 92.208185] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[ 246.843861] md: bind<sda5>
[ 246.846984] md: bind<sdb5>
[ 246.882108] md/raid1:md2: active with 2 out of 2 mirrors
[ 246.887565] md2: detected capacity change from 0 to 1995550359552
[ 247.206382] md2: unknown partition table
[ 597.291148] EXT4-fs (dm-0): barriers disabled
[ 598.041937] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 598.369067] EXT4-fs (dm-0): re-mounted. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl
[ 598.452993] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 598.476364] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 621.402693] md: requested-resync of RAID array md2
[ 621.407518] md: minimum _guaranteed_ speed: 10000 KB/sec/disk.
[ 621.413481] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for requested-resync.
[ 621.423801] md: using 128k window, over a total of 1948779648k.')

[bashseb]

you probably mean a dd image, right?

I can't do this, because I already have set up user, keys and encryption settings. so a dd image would contain this private info. have you tried the reset button in the back? read the instructions on the factory reset....


sorry

[WarheadsSE]

I have a feeling he trashed the NAND in his unit.

[adamhuang]

$this->bbcode_second_pass_quote('bashseb', 'y')ou probably mean a dd image, right?

I can't do this, because I already have set up user, keys and encryption settings. so a dd image would contain this private info. have you tried the reset button in the back? read the instructions on the factory reset....


sorry

[bashseb]

ok, got it. I can provide this once I'm home later today.

[adamhuang]

$this->bbcode_second_pass_quote('bashseb', 'o')k, got it. I can provide this once I'm home later today.