Vivante GC320 support

This forum is for supported devices using an ARMv7 Freescale SoC.

Re: Vivante GC320 support

Postby Yenal » Mon Apr 07, 2014 8:36 pm

$this->bbcode_second_pass_quote('', 'I') got a whisper, etnaviv may soon be working on mainline 3.14 soon, with dri


this would be great news :)
Yenal
 
Posts: 18
Joined: Wed Jan 29, 2014 6:31 pm

Re: Vivante GC320 support

Postby tobbebobbe » Tue Apr 08, 2014 8:27 am

$this->bbcode_second_pass_quote('pepedog', 'O')nly when building something that requires the headers.
I got a whisper, etnaviv may soon be working on mainline 3.14 soon, with dri


I´m sorry but you don´t really answer my question. Should I then remove BOTH header packages? Do I need to perform any other cleanup?
tobbebobbe
 
Posts: 65
Joined: Thu Jan 30, 2014 12:00 pm

Re: Vivante GC320 support

Postby pepedog » Tue Apr 08, 2014 9:21 am

Remove both.
pepedog
Developer
 
Posts: 2431
Joined: Mon Jun 07, 2010 3:30 pm
Location: London UK

Re: Vivante GC320 support

Postby tobbebobbe » Tue Apr 08, 2014 6:05 pm

Well, even with both removed my xbmc won't start but locks up the whole device. It used to work until around when the header package conflict started.
tobbebobbe
 
Posts: 65
Joined: Thu Jan 30, 2014 12:00 pm

Re: Vivante GC320 support

Postby pepedog » Tue Apr 08, 2014 7:28 pm

I know this package works on cubox i, utilite, and wandboard.
On a clean install add only xbmc-imx-git
The only other thing is put these rules in /etc/udev.d/rules/ http://myplugbox.com/cbi/99-imx.rules
Start with
systemctl start xbmc
Wandboard and cuboxi need the -dt kernel, utilite the latest kernel
pepedog
Developer
 
Posts: 2431
Joined: Mon Jun 07, 2010 3:30 pm
Location: London UK

Re: Vivante GC320 support

Postby tobbebobbe » Tue Apr 08, 2014 8:21 pm

When I start xbmc using systemctl (so under the xbmc user) HDMI-CEC is non-functional because of wrongly set up permissions.

When I start xbmc as root the gui works and also hdmi-cec. But at this moment I am unable to play movies. The time starts ticking and I can hear the sound, but no picture. XBMC log file gives me errors like this:

$this->bbcode_second_pass_quote('', '1')8:09:42 T:1417671728 ERROR: VpuAllocBuffers - Unable alloc 5236744 bytes of physical memory (1).
18:09:42 T:1417671728 ERROR: VpuOpen - iMX VPU open failed (2).
18:09:42 T:1417671728 ERROR: VpuAllocBuffers - Unable alloc 5236744 bytes of physical memory (1).
18:09:42 T:1417671728 ERROR: VpuOpen - iMX VPU open failed (2).
18:09:42 T:1417671728 ERROR: VpuAllocBuffers - Unable alloc 5236744 bytes of physical memory (1).
18:09:42 T:1417671728 ERROR: VpuOpen - iMX VPU open failed (2).
18:09:42 T:1417671728 ERROR: VpuAllocBuffers - Unable alloc 5236744 bytes of physical memory (1).
18:09:42 T:1417671728 ERROR: VpuOpen - iMX VPU open failed (2).
18:09:42 T:1417671728 ERROR: VpuAllocBuffers - Unable alloc 5236744 bytes of physical memory (1).
18:09:42 T:1417671728 ERROR: VpuOpen - iMX VPU open failed (2).
tobbebobbe
 
Posts: 65
Joined: Thu Jan 30, 2014 12:00 pm
Top

Re: Vivante GC320 support

Postby pepedog » Tue Apr 08, 2014 8:55 pm

Can you install these$this->bbcode_second_pass_code('', 'pacman -Sy gpu-viv-bin-mx6q-fb firmware-imx imx-vpu')
Let me know which one was not a reinstall.

You tell me which permissions need fixing for cec and will get it in the package
pepedog
Developer
 
Posts: 2431
Joined: Mon Jun 07, 2010 3:30 pm
Location: London UK

Re: Vivante GC320 support

Postby tobbebobbe » Wed Apr 09, 2014 6:25 pm

$this->bbcode_second_pass_quote('', 'w')arning: gpu-viv-bin-mx6q-fb-3.10.17_1.0.0_beta-1 is up to date -- reinstalling
warning: firmware-imx-3.5.7_1.0.0-2 is up to date -- reinstalling
warning: imx-vpu-3.10.17_1.0.0-1 is up to date -- reinstalling


Now xbmc starts and play movies. But after a few minutes it crasches. I had this problem also before.
tobbebobbe
 
Posts: 65
Joined: Thu Jan 30, 2014 12:00 pm
Top

Re: Vivante GC320 support

Postby pepedog » Wed Apr 09, 2014 9:20 pm

Is it getting hot
pepedog
Developer
 
Posts: 2431
Joined: Mon Jun 07, 2010 3:30 pm
Location: London UK

Re: Vivante GC320 support

Postby tobbebobbe » Fri Apr 11, 2014 10:25 am

$this->bbcode_second_pass_quote('pepedog', 'I')s it getting hot


No not really. Feeling the top of the utilite it is luke warm. Some of the early images from Stephan ran the utilite far hotter without this problem.
tobbebobbe
 
Posts: 65
Joined: Thu Jan 30, 2014 12:00 pm
Top

PreviousNext

Return to Freescale

Who is online

Users browsing this forum: No registered users and 0 guests