Help restore my pogoplug

[Andrey]

I apologize for my English
I gave the not working pogoplug
I can not be accessed through SHH, but can TTL
$this->bbcode_second_pass_code('', 'Stage-1 Bootloader @ Olderzeus
Attempting to set PLLA to 700MHz ...
plla_ctrl0 : 0x0000000A
plla_ctrl1 : 0x000E0000
plla_ctrl2 : 0x001B01A0
plla_ctrl3 : 0x00000016
PLLA Set

Setup memory, testing
Reading NAND , Image 0
Address : 0x00040000
Hdr len: 0x0008718C
Hdr CRC: 0xB33E2BAD
OK


U-Boot 2014.04 (Jul 13 2014 - 00:38:06)

DRAM: 128 MiB
NAND: 128 MiB
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: dwmac.40400000
Press ESC to stop autoboot: 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
stopping USB..
Wrong Image Format for bootm command
ERROR: can't get kernel image!

Loading from nand0, offset 0x200000
Fit image detected...
FIT description: ARM OpenWrt FIT (Flattened Image Tree)
Image 0 (kernel@1)
Description: ARM OpenWrt Linux-3.14.12
Type: Kernel Image
Compression: uncompressed
Data Start: 0x610000e4
Data Size: 1782592 Bytes = 1.7 MiB
Architecture: ARM
OS: Linux
Load Address: 0x60008000
Entry Point: 0x60008000
Hash algo: crc32
Hash value: 402ef033
Hash algo: sha1
Hash value: 408ea14eecef162a85591357fa399d0b9c4c6312
Image 1 (fdt@1)
Description: ARM OpenWrt pogoplug-pro device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x611b355c
Data Size: 6959 Bytes = 6.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: db6e51e4
Hash algo: sha1
Hash value: 66317f772c6daab9de26c7dfe42fcd8c2f6d0c72
Default Configuration: 'config@1'
Configuration 0 (config@1)
Description: OpenWrt
Kernel: kernel@1
FDT: fdt@1
## Loading kernel from FIT Image at 61000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-3.14.12
Type: Kernel Image
Compression: uncompressed
Data Start: 0x610000e4
Data Size: 1782592 Bytes = 1.7 MiB
Architecture: ARM
OS: Linux
Load Address: 0x60008000
Entry Point: 0x60008000
Hash algo: crc32
Hash value: 402ef033
Hash algo: sha1
Hash value: 408ea14eecef162a85591357fa399d0b9c4c6312
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 61000000 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description: ARM OpenWrt pogoplug-pro device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x611b355c
Data Size: 6959 Bytes = 6.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: db6e51e4
Hash algo: sha1
Hash value: 66317f772c6daab9de26c7dfe42fcd8c2f6d0c72
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x611b355c
Loading Kernel Image ... OK
Loading Device Tree to 67e1d000, end 67e21b2e ... OK

Starting kernel ...

Uncompressing Linux...

XZ-compressed data is corrupt

-- System halted')

I do not know exactly what kind of model Pogoplug, but i think Pogoplug Video
I make pictures board


I understand that he wants to boot from USB and need firmware.bin , but i can't search this is file.

I renamed openwrt-kirkwood-iconnect-u-boot.bin in firmware.bin and I tried to shove
After start pogoplug write


$this->bbcode_second_pass_code('', 'scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
reading firmware.bin
364540 bytes read in 57 ms (6.1 MiB/s)
stopping USB..
Wrong Image Format for bootm command
ERROR: can't get kernel image!')

[Andrey]

I don't know what i make, but after i received
$this->bbcode_second_pass_code('', 'Stage-1 Bootloader @ Olderzeus
Attempting to set PLLA to 700MHz ...
plla_ctrl0 : 0x0000000A
plla_ctrl1 : 0x000E0000
plla_ctrl2 : 0x001B01A0
plla_ctrl3 : 0x00000016
PLLA Set

Setup memory, testing
Reading NAND , Image 0
Address : 0x00040000
Hdr len: 0x0008718C
Hdr CRC: 0xB33E2BAD
OK


U-Boot 2014.04 (Jul 13 2014 - 00:38:06)

DRAM: 128 MiB
NAND: 128 MiB
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: dwmac.40400000
Press ESC to stop autoboot: 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
stopping USB..
Wrong Image Format for bootm command
ERROR: can't get kernel image!

Loading from nand0, offset 0x200000
Fit image detected...
FIT description: ARM OpenWrt FIT (Flattened Image Tree)
Image 0 (kernel@1)
Description: ARM OpenWrt Linux-3.14.12
Type: Kernel Image
Compression: uncompressed
Data Start: 0x610000e4
Data Size: 1782592 Bytes = 1.7 MiB
Architecture: ARM
OS: Linux
Load Address: 0x60008000
Entry Point: 0x60008000
Hash algo: crc32
Hash value: 402ef033
Hash algo: sha1
Hash value: 408ea14eecef162a85591357fa399d0b9c4c6312
Image 1 (fdt@1)
Description: ARM OpenWrt pogoplug-pro device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x611b355c
Data Size: 6959 Bytes = 6.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: db6e51e4
Hash algo: sha1
Hash value: 66317f772c6daab9de26c7dfe42fcd8c2f6d0c72
Default Configuration: 'config@1'
Configuration 0 (config@1)
Description: OpenWrt
Kernel: kernel@1
FDT: fdt@1
## Loading kernel from FIT Image at 61000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-3.14.12
Type: Kernel Image
Compression: uncompressed
Data Start: 0x610000e4
Data Size: 1782592 Bytes = 1.7 MiB
Architecture: ARM
OS: Linux
Load Address: 0x60008000
Entry Point: 0x60008000
Hash algo: crc32
Hash value: 402ef033
Hash algo: sha1
Hash value: 408ea14eecef162a85591357fa399d0b9c4c6312
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 61000000 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description: ARM OpenWrt pogoplug-pro device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x611b355c
Data Size: 6959 Bytes = 6.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: db6e51e4
Hash algo: sha1
Hash value: 66317f772c6daab9de26c7dfe42fcd8c2f6d0c72
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x611b355c
Loading Kernel Image ... OK
Loading Device Tree to 67e1d000, end 67e21b2e ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.12 (guest@debian) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #3 SMP Tue Jul 22 20:02:48 AKDT 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c7ee5000 s7808 r8192 d12672 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: root=ubi0:rootfs rootfstype=ubifs ubi.mtd=1,512 console=ttyS0,115200 rootwait mem=128M noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 124940K/131072K available (3335K kernel code, 148K rwdata, 1032K rodata, 163K init, 209K bss, 6132K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc044bf28 (4368 kB)
[ 0.000000] .init : 0xc044c000 - 0xc0474e80 ( 164 kB)
[ 0.000000] .data : 0xc0476000 - 0xc049b2fc ( 149 kB)
[ 0.000000] .bss : 0xc049b2fc - 0xc04cf784 ( 210 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000020] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns
[ 0.000222] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.069946] pid_max: default: 32768 minimum: 301
[ 0.070205] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070228] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.072752] CPU: Testing write buffer coherency: ok
[ 0.073208] Setting up static identity map for 0x600121e0 - 0x60012218
[ 0.075450] CPU1: Booted secondary processor
[ 0.140211] Brought up 2 CPUs
[ 0.140239] SMP: Total of 2 processors activated.
[ 0.144744] pinctrl core: initialized pinctrl subsystem
[ 0.145656] NET: Registered protocol family 16
[ 0.146263] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.148382] cpuidle: using governor ladder
[ 0.148405] cpuidle: using governor menu
[ 0.159508] gpio-oxnas 44000000.gpio: at address c8846000
[ 0.160184] gpio-oxnas 44100000.gpio: at address c8848000
[ 0.161103] pinctrl-oxnas pinctrl.5: initialized OX820 pinctrl driver
[ 0.189409] bio: create slab <bio-0> at 0
[ 0.301030] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 1.309980] oxnas-pcie 47c00000.pcie-controller: link down
[ 1.310607] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 1.310645] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 1.310666] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 1.310684] pci_bus 0000:00: root bus resource [io 0x4be00000-0x4befffff]
[ 1.310707] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 1.310753] PCI: bus0: Fast back to back transfers enabled
[ 1.312640] SCSI subsystem initialized
[ 1.315594] usbcore: registered new interface driver usbfs
[ 1.315998] usbcore: registered new interface driver hub
[ 1.316459] usbcore: registered new device driver usb
[ 1.317314] pps_core: LinuxPPS API ver. 1 registered
[ 1.317337] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.317608] PTP clock support registered
[ 1.320145] Switched to clocksource rps_clocksource_timer
[ 1.325091] NET: Registered protocol family 2
[ 1.326016] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.326080] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 1.326120] TCP: Hash tables configured (established 1024 bind 1024)
[ 1.326210] TCP: reno registered
[ 1.326236] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.326282] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.326630] NET: Registered protocol family 1
[ 1.330186] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 1.331688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.331724] msgmni has been set to 244
[ 1.332728] io scheduler noop registered
[ 1.332751] io scheduler deadline registered (default)
[ 1.334947] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 1.337710] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[ 1.785466] console [ttyS0] enabled
[ 2.092953] scsi0 : sata_oxnas
[ 2.157061] ata1: SATA max UDMA/133 irq 50
[ 2.161356] ox820sata: reseting SATA core
[ 2.168465] nand: Could not find valid ONFI parameter page; aborting
[ 2.174827] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 2.181224] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 2.185684] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 2.191336] Scanning device for bad blocks
[ 2.280599] 2 ofpart partitions found on MTD device 41000000.nand
[ 2.286722] Creating 2 MTD partitions on "41000000.nand":
[ 2.292108] 0x000000000000-0x000000e00000 : "boot"
[ 2.299409] 0x000000e00000-0x000008000000 : "rootfs"
[ 2.306969] mtd: device 1 (rootfs) set to be root filesystem
[ 2.312701] mtdsplit: no squashfs found in "41000000.nand"
[ 2.320885] stmmaceth 40400000.ethernet: no reset control found
[ 2.326835] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 2.331857] Ring mode enabled
[ 2.334896] DMA HW capability register supported
[ 2.339537] Enhanced/Alternate descriptors
[ 2.343872] Enabled extended descriptors
[ 2.347886] RX Checksum Offload Engine supported (type 2)
[ 2.353341] TX Checksum insertion supported
[ 2.357606] Wake-Up On Lan supported
[ 2.361246] Enable RX Mitigation via HW Watchdog Timer
[ 2.371742] libphy: stmmac: probed
[ 2.375147] eth0: PHY ID 001cc914 at 0 IRQ 0 (stmmac-0:00) active
[ 2.381337] eth0: PHY ID 001cc914 at 3 IRQ 0 (stmmac-0:03)
[ 2.387466] TCP: cubic registered
[ 2.390778] NET: Registered protocol family 17
[ 2.395302] 8021q: 802.1Q VLAN Support v1.8
[ 2.402946] UBI: attaching mtd1 to ubi0
[ 2.520038] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.573409] UBI: scanning is finished
[ 2.588229] UBI: attached mtd1 (name "rootfs", size 114 MiB) to ubi0
[ 2.594624] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 2.601410] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 2.607992] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[ 2.614679] UBI: good PEBs: 912, bad PEBs: 0, corrupted PEBs: 0
[ 2.620587] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2.627694] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1189103203
[ 2.636715] UBI: available PEBs: 0, total reserved PEBs: 912, PEBs reserved for bad PEB handling: 20
[ 2.645877] UBI: background thread "ubi_bgt0d" started, PID 274
[ 2.645972] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.700551] UBIFS: recovery needed
[ 2.851287] UBIFS: recovery deferred
[ 2.855014] UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
[ 2.861908] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.871024] UBIFS: FS size: 113154048 bytes (107 MiB, 877 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[ 2.880824] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.885857] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7FE1DED9-7185-4650-BD5D-AEA89EE1F018, small LPT model
[ 2.896691] VFS: Mounted root (ubifs filesystem) readonly on device 0:10.
[ 2.903772] Freeing unused kernel memory: 160K (c044c000 - c0474000)
[ 2.912535] Starting init: /etc/preinit exists but couldn't execute it (error -8)
/sbin/init: '/lib/libblobmsg_json.so' is not an ELF file
/sbin/init: can't load library 'libblobmsg_json.so'
[ 2.960166] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00001000
[ 2.960166]
[ 2.969277] CPU1: stopping
[ 2.971985] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.12 #3
[ 2.977996] [<c0019598>] (unwind_backtrace) from [<c0015ce0>] (show_stack+0x10/0x14)
[ 2.985720] [<c0015ce0>] (show_stack) from [<c01aba68>] (dump_stack+0x7c/0x94)
[ 2.992924] [<c01aba68>] (dump_stack) from [<c0018120>] (handle_IPI+0xcc/0x17c)
[ 3.000207] [<c0018120>] (handle_IPI) from [<c00084d4>] (gic_handle_irq+0x54/0x5c)
[ 3.007749] [<c00084d4>] (gic_handle_irq) from [<c0008f80>] (__irq_svc+0x40/0x50)
[ 3.015188] Exception stack(0xc7867f98 to 0xc7867fe0)
[ 3.020218] 7f80: ffffffed 00000000
[ 3.028362] 7fa0: c047fc40 00000000 c7866000 c7866000 c047f2b8 c03a0eac c0482832 00000001
[ 3.036505] 7fc0: c0482832 c7866000 00000014 c7867fe0 c0013b44 c0013b48 60000113 ffffffff
[ 3.044651] [<c0008f80>] (__irq_svc) from [<c0013b48>] (arch_cpu_idle+0x30/0x50)
[ 3.052026] [<c0013b48>] (arch_cpu_idle) from [<c00581b8>] (cpu_startup_entry+0xd0/0x130)
[ 3.060170] [<c00581b8>] (cpu_startup_entry) from [<60008560>] (0x60008560)

')

[Socaltom]

It appears to fall under the Pogo V3 architecture. What do you have plugged into the SATA connector?
This guide might help you out. If you can get it set up correctly, it will boot from a SATA drive without using NAND.
viewtopic.php?f=55&t=2146
Tom

[WarheadsSE]

He seems to also have OpenWRT + their uboot installed.

[Andrey]

Thank you all for your willingness to help.
On pogoplug really was installed OpenWRT with the Chinese language.
The previous owner removed the luci with the Chinese language and Pogo stopped working
Now my router not see Pogoplug and so do not have access to SSH
Only have access to TTL. Pogoplug addresses to USB and asks firmware.bin

[Andrey]

I have SATA disk and i can make any partitions of any file system
Also can restore the image partitions through Paragon Hard Disk Manager

[Andrey]

http://www.mk-link.com/POGO/
http://pan.baidu.com/s/1pJ2RwWb
Maybe someone knows there is something similar in English

[Andrey]

Make as http://www.mk-link.com/POGO/
But can't choose number. Not work keyboard.
$this->bbcode_second_pass_code('', 'U-Boot SPL 2013.07-00026-g85e700a-dirty (Oct 08 2013 - 22:16:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193

PLLA Set
Bus 0: OK
Device 0: Initialising disks
SATA PHY not ready for device 1
Detecting SATA busses:
Bus 0: Found first device OK
Device 0: Model: HTS541040G9SA00 Firm: MB2IC60H Ser#: MPBBL0X2JUJSEM
Type: Hard Disk
Capacity: 38154.3 MB = 37.2 GB (78140160 x 512)
Device 1: not available
Environment successfully read from disk 0 primary image


U-Boot 1.1.2 (Jun 2 2013 - 09:19:42)

U-Boot code: 60D00000 -> 60D21484 BSS: -> 60D26DBC
RAM Configuration:
Bank #0: 60000000 128 MB
SRAM Configuration:
64KB at 0x50000000
NAND:128 MiB
In: serial
Out: serial
Err: serial
Setting Linux mem= boot arg value

IDE read: device 0 block # 288, count 1 ... 1 blocks read: OK
Hit any key to stop autoboot: 0

IDE device 0: Model: HTS541040G9SA00 Firm: MB2IC60H Ser#: MPBBL0X2JUJSEM
Type: Hard Disk
Capacity: 38154.3 MB = 37.2 GB (78140160 x 512)
... is now current device

IDE read: device 0 block # 1290, count 5700 ... 5700 blocks read: OK
## Booting image at 60500000 ...
Image Name: Linux-3.1.10
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2136848 Bytes = 2 MB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.10 (root@debian) (gcc version 4.4.1 (Sourcery G ++ Lite 2009q3-67) ) #1 SMP Tue Oct 1 19:54:19 CST 2013
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr =00c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: PogoPlug Pro
[ 0.000000] 1 memory region
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0744000 s9248 r8192 d15328 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 32512
[ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0,115200 elevator =cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor y cgroups
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 122936k/122936k available, 8136k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xed000000 ( 584 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc055b000 (5452 kB)
[ 0.000000] .init : 0xc055b000 - 0xc058d420 ( 202 kB)
[ 0.000000] .data : 0xc058e000 - 0xc05b62b0 ( 161 kB)
[ 0.000000] .bss : 0xc05b62d4 - 0xc0640ce8 ( 555 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, N odes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:146 nr_irqs:146 146
[ 0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.030000] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] Initializing cgroup subsys cpuacct
[ 0.090000] Initializing cgroup subsys memory
[ 0.100000] Initializing cgroup subsys devices
[ 0.100000] Initializing cgroup subsys freezer
[ 0.110000] CPU: Testing write buffer coherency: ok
[ 0.110000] ftrace: allocating 14135 entries in 42 pages
[ 0.130000] Calibrating local timer... 399.98MHz.
[ 0.200000] platform_smp_prepare_cpus 33
[ 0.200000] hw perfevents: enabled with v6mpcore PMU driver, 3 counters avail able
[ 0.210000] CPU1: Booted secondary processor
[ 0.210000] CPU1: Unknown IPI message 0x1
[ 0.270000] Brought up 2 CPUs
[ 0.270000] SMP: Total of 2 processors activated (638.97 BogoMIPS).
[ 0.280000] devtmpfs: initialized
[ 0.280000] NET: Registered protocol family 16
[ 0.290000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.290000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.300000] bio: create slab <bio-0> at 0
[ 0.310000] SCSI subsystem initialized
[ 0.310000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.320000] Switching to clocksource rps-timer2
[ 0.360000] NET: Registered protocol family 2
[ 0.360000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.370000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.380000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.380000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.390000] TCP reno registered
[ 0.390000] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.400000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.410000] NET: Registered protocol family 1
[ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.430000] JFFS2 version 2.2 (NAND) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001 -2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 240
[ 0.450000] io scheduler noop registered
[ 0.450000] io scheduler deadline registered
[ 0.460000] io scheduler cfq registered (default)
[ 0.470000] ox820_gpio: initialized
[ 0.770000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.780000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[ 1.750000] Uniform Multi-Platform E-IDE driver
[ 1.750000] ide-gd driver 1.18
[ 1.750000] ide-cd driver 5.00
[ 1.760000] ox820sata: OX820 sata core.
[ 1.760000] scsi0 : oxnassata
[ 1.770000] scsi1 : oxnassata
[ 1.770000] ata1: SATA max UDMA/133 irq 50
[ 1.770000] ata2: SATA max UDMA/133 irq 50
[ 1.780000] sata_ox820: Initialized
[ 1.780000] ONFI flash detected
[ 1.790000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128 MiB 3,3V 8-bit)
[ 1.800000] Scanning device for bad blocks
[ 1.940000] Creating 3 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[ 1.940000] 0x000000000000-0x000008000000 : "NAND 128MiB 3,3V 8-bit"
[ 1.950000] 0x000000000000-0x000000e00000 : "boot"
[ 1.960000] 0x000000e00000-0x000008000000 : "rootfs"
[ 1.970000] mtd: partition "rootfs" set to be root filesystem
[ 1.970000] split_squashfs: no squashfs found in "NAND 128MiB 3,3V 8-bit"
[ 1.980000] Probing for Synopsis GMAC, unit 0
[ 1.980000] eth0: Tuning GMAC 0 RGMII timings
[ 1.990000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[ 1.990000] eth0: GMAC ver = 53, vendor ver = 18 at 0xed400000, IRQ 40
[ 2.000000] eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
[ 2.010000] eth0: Ethernet addr: 00:30:e0:00:00:00
[ 2.010000] ox820_led_gpio: initialized
[ 2.020000] oprofile: using arm/mpcore
[ 2.020000] TCP cubic registered
[ 2.030000] NET: Registered protocol family 10
[ 2.040000] IPv6 over IPv4 tunneling driver
[ 2.040000] NET: Registered protocol family 17
[ 2.050000] VFP support v0.3: not present
[ 2.700000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.700000] ata1.00: ATA-7: HTS541040G9SA00, MB2IC60H, max UDMA/100
[ 2.710000] ata1.00: 78140160 sectors, multi 0: LBA48
[ 2.720000] ata1.00: configured for UDMA/100
[ 2.720000] scsi 0:0:0:0: Direct-Access ATA HTS541040G9SA00 MB2I PQ : 0 ANSI: 5
[ 2.730000] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.740000] sd 0:0:0:0: [sda] Write Protect is off
[ 2.740000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 3.080000] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.170000] sda: sda1
[ 3.170000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.200000] kjournald starting. Commit interval 5 seconds
[ 3.210000] EXT3-fs (sda1): using internal journal
[ 3.220000] EXT3-fs (sda1): recovery complete
[ 3.220000] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 3.230000] VFS: Mounted root (ext3 filesystem) on device 8:1.
[ 3.250000] devtmpfs: mounted
[ 3.250000] Freeing init memory: 200K
...▒▒▒▒▒▒̼▒▒▒Ӧ▒▒▒▒▒▒▒▒▒к▒▒▒Ȼ▒▒س▒▒▒▒▒▒▒▒Զ▒ˢ▒¹̼▒...
1 (original)ˢ▒ص▒POGOԭ▒▒̼▒,▒ظ▒▒̼▒▒▒▒▒Ҫ▒▒дSN▒▒▒▒MAC▒▒ַ
2 (wzdzdhan_1020)▒▒̳▒▒▒▒̼▒▒▒▒▒▒▒▒▒λ▒▒▒▒▒▒▒▒ü▒▒▒Ͷ▒▒ʹ▒▒
------------------------------------------------------------------
-------------▒▒▒¹̼▒Ϊ▒▒▒ʲ▒▒Թ̼▒,▒Ƽ▒ʹ▒▒2▒Ź̼▒---------------
------------------------------------------------------------------
3 (990101_0925)▒▒̳99▒▒▒▒▒▒▒¹̼▒▒▒▒▒̳▒▒ӳSamba▒ٶ▒▒▒▒
4 (CEC0D5F1B6AB_1003)▒▒̳▒▒▒▒▒▒▒¹̼▒▒▒֧▒▒TTL▒̽▒RX TX▒ﵽ▒ָ▒Ĭ▒▒▒▒▒õ▒Ч▒▒
5 (rsd1987_0927)▒▒̳▒▒▒▒̼▒▒▒▒▒δ▒▒▒▒
6 (lintel_0923)▒▒▒Ƽ▒С▒▒▒û▒ʹ▒ã▒▒▒Ҫ▒▒▒õĵط▒▒϶▒
/ #
')

[WarheadsSE]

Good news.. that booted ...

[Andrey]

Not good. I can't choose number. Not work keyboard.
...▒▒▒▒▒▒̼▒▒▒Ӧ▒▒▒▒▒▒▒▒▒к▒▒▒Ȼ▒▒س▒▒▒▒▒▒▒▒Զ▒ˢ▒¹̼▒...
1 (original)ˢ▒ص▒POGOԭ▒▒̼▒,▒ظ▒▒̼▒▒▒▒▒Ҫ▒▒дSN▒▒▒▒MAC▒▒ַ
2 (wzdzdhan_1020)▒▒̳▒▒▒▒̼▒▒▒▒▒▒▒▒▒λ▒▒▒▒▒▒▒▒ü▒▒▒Ͷ▒▒ʹ▒▒
------------------------------------------------------------------
-------------▒▒▒¹̼▒Ϊ▒▒▒ʲ▒▒Թ̼▒,▒Ƽ▒ʹ▒▒2▒Ź̼▒---------------
------------------------------------------------------------------
3 (990101_0925)▒▒̳99▒▒▒▒▒▒▒¹̼▒▒▒▒▒̳▒▒ӳSamba▒ٶ▒▒▒▒
4 (CEC0D5F1B6AB_1003)▒▒̳▒▒▒▒▒▒▒¹̼▒▒▒֧▒▒TTL▒̽▒RX TX▒ﵽ▒ָ▒Ĭ▒▒▒▒▒õ▒Ч▒▒
5 (rsd1987_0927)▒▒̳▒▒▒▒̼▒▒▒▒▒δ▒▒▒▒
6 (lintel_0923)▒▒▒Ƽ▒С▒▒▒û▒ʹ▒ã▒▒▒Ҫ▒▒▒õĵط▒▒϶▒

maybe someone else can give a disk image?