[iConnect] u-boot upgrade

by **tmtben** » Tue Jun 28, 2011 7:20 pm

Hi,

I tried to upgrade u-boot (with a self compiled u-boot.bin file).

But it fails :-(

u-boot did not work anymore, I can't get console access anymore.
The iconnect imager did not work anymore too.

Any idea?
Is my iconnect really dead?

Thanks,
Ben

by **kmihelich** » Wed Jun 29, 2011 9:41 pm

You should never outright flash something you just compiled. You can always tftp the new image into memory and boot that location. Your only hope at this point is likely JTAG recovery.

by **tmtben** » Thu Jun 30, 2011 6:19 am

$this->bbcode_second_pass_quote('kmihelich', 'Y')ou should never outright flash something you just compiled. You can always tftp the new image into memory and boot that location. Your only hope at this point is likely JTAG recovery.

by **himax** » Sun Jul 03, 2011 5:54 pm

For whom interested i unbricked my iconnect's u-boot with a jtag connection. You can take an (indulgent) look to :
http://hardsoftmix.blogspot.com/2011/07 ... nnect.html

[iConnect] u-boot upgrade

[iConnect] u-boot upgrade

Re: [iConnect] u-boot ugrade

Re: [iConnect] u-boot ugrade

Re: [iConnect] u-boot upgrade

Who is online