XBMC PKGBUILD for raspberry pi

[WarheadsSE]

pacman -Ql <package> to check the files it has.

[fake415]

Thats the output:
pacman -Ql libgcrypt
libgcrypt /usr/
libgcrypt /usr/bin/
libgcrypt /usr/bin/dumpsexp
libgcrypt /usr/bin/hmac256
libgcrypt /usr/bin/libgcrypt-config
libgcrypt /usr/include/
libgcrypt /usr/include/gcrypt-module.h
libgcrypt /usr/include/gcrypt.h
libgcrypt /usr/lib/
libgcrypt /usr/lib/libgcrypt.so
libgcrypt /usr/lib/libgcrypt.so.11
libgcrypt /usr/lib/libgcrypt.so.11.7.0
libgcrypt /usr/share/
libgcrypt /usr/share/aclocal/
libgcrypt /usr/share/aclocal/libgcrypt.m4
libgcrypt /usr/share/info/
libgcrypt /usr/share/info/gcrypt.info-1.gz
libgcrypt /usr/share/info/gcrypt.info.gz

Thanks for the quick reply

[aska]

I try to compile xbmc from aur (xbmc-rbp-git) and I have these errors:
$this->bbcode_second_pass_code('', '
make -C xbmc/cores/DllLoader/exports wrapper.def
make[1]: Entering directory `/var/abs/local/yaourtbuild/xbmc-rbp-git/src/xbmc-rbp/xbmc/cores/DllLoader/exports'
make[1]: `wrapper.def' is up to date.
make[1]: Leaving directory `/var/abs/local/yaourtbuild/xbmc-rbp-git/src/xbmc-rbp/xbmc/cores/DllLoader/exports'
make -C lib
make[1]: Entering directory `/var/abs/local/yaourtbuild/xbmc-rbp-git/src/xbmc-rbp/lib'
make -C ffmpeg
make[2]: Entering directory `/var/abs/local/yaourtbuild/xbmc-rbp-git/src/xbmc-rbp/lib/ffmpeg'
libavcodec/Makefile:20: *** missing separator. Stop.
make[2]: Leaving directory `/var/abs/local/yaourtbuild/xbmc-rbp-git/src/xbmc-rbp/lib/ffmpeg'
make[1]: *** [ffmpeg] Error 2
make[1]: Leaving directory `/var/abs/local/yaourtbuild/xbmc-rbp-git/src/xbmc-rbp/lib'
make: *** [dvdpcodecs] Error 2
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build xbmc-rbp-git.
==> Restart building xbmc-rbp-git ? [y/N]
')

why? help me , thanks

[guisacouto]

Can someone please upload an updated build of xbmc? It would be much easier than wait 8hours for it to compile..

[MattScherbatsky]

I can't compile it under new Archlinux img. In pkgbuild I removed "arm" and I added "armv6h" but I can't compile it.

[pepedog]

pacman -Sy xbmc-rbp-git
v6hf only, untested by me but requires arm128_start.elf to be the start.elf
Latest kernel doesn't boot, btw

[MattScherbatsky]

$this->bbcode_second_pass_quote('pepedog', 'p')acman -Sy xbmc-rbp-git
v6hf only, untested by me but requires arm128_start.elf to be the start.elf
Latest kernel doesn't boot, btw

[pepedog]

$this->bbcode_second_pass_quote('MattScherbatsky', '')$this->bbcode_second_pass_quote('pepedog', 'p')acman -Sy xbmc-rbp-git
v6hf only, untested by me but requires arm128_start.elf to be the start.elf
Latest kernel doesn't boot, btw

[tgc]

$this->bbcode_second_pass_quote('pepedog', 'p')acman -Sy xbmc-rbp-git
v6hf only, untested by me but requires arm128_start.elf to be the start.elf
Latest kernel doesn't boot, btw

[tgc]

Since libcec has now support for Raspberry Pi, I've created a PKGBUILD for libcec which makes it possible to control XBMC with your remote control:
$this->bbcode_second_pass_code('', 'pkgname=libcec-rpi
pkgver=1.9.0
pkgrel=1
pkgdesc="Pulse-Eight's libcec for the Pulse-Eight USB-CEC adapter with support for raspberry pi"
arch=('armv6h')
url="https://github.com/Pulse-Eight/libcec"
license=('GPL')
depends=('udev' 'lockdev' 'raspberrypi-firmware')
conflicts=('libcec')
provides=('libcec')
source=("$pkgname-$pkgver.tar.gz::https://github.com/Pulse-Eight/libcec/tarball/libcec-$pkgver")
_srcfolder=Pulse-Eight-libcec-217b236
sha256sums=('93c0c56b446f82ef71499fd88186c7212a92b037cb8a19516140216cc0aae68f')
options=(!libtool)

build() {
mv "$_srcfolder" "$pkgname-$pkgver"

cd "$pkgname-$pkgver"
autoreconf -vif
./configure --prefix=/usr --enable-rpi \
--with-rpi-include-path="/opt/vc/include" \
--with-rpi-lib-path="/opt/vc/lib"
make
}

package() {
cd "$pkgname-$pkgver"
make DESTDIR="$pkgdir" install
}')