Hi everyone,
recently I updated linux-raspberrypi4 package to 4.19.93-version. It ran mkinitcpio as usual and created a boot image successfully. I rebooted the device, but when I type uname -r, I get $this->bbcode_second_pass_code('', '4.19.79-1-ARCH'). Does anyone know why the old kernel is loaded and not the new one?
[SOLVED] [Raspberry Pi 4] linux-raspberrypi4 upgrade
3 posts
• Page 1 of 1
[SOLVED] [Raspberry Pi 4] linux-raspberrypi4 upgrade
by mati9 » Mon Jan 13, 2020 7:59 pm
Last edited by mati9 on Tue Jan 14, 2020 10:27 pm, edited 1 time in total.
- mati9
- Posts: 2
- Joined: Mon Jan 13, 2020 7:51 pm
Re: [Raspberry Pi 4] linux-raspberrypi4 upgrade
by moonman » Mon Jan 13, 2020 9:56 pm
Sounds like your /boot is not mounted.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
- moonman
- Developer
- Posts: 3388
- Joined: Sat Jan 15, 2011 3:36 am
Re: [Raspberry Pi 4] linux-raspberrypi4 upgrade
by mati9 » Tue Jan 14, 2020 12:53 pm
Thank you for your response. You were exactly right. My fstab lacked $this->bbcode_second_pass_code('', '/dev/mmcblk0p1 /boot vfat defaults,noatime 0 2')
Now the new kernel is loaded on boot
Now the new kernel is loaded on boot
- mati9
- Posts: 2
- Joined: Mon Jan 13, 2020 7:51 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 12 guests